I am new to unix. I have edited the /etc/resolv.conf. It shows
domain name
ip address
ip address
These are the same ips of the dns I use for windows. Still I get no name resolution on the internet. I can ping external ip's is there anything else I need to check? (1 Reply)
Hi ,,still struggling with unix ,,the system is running sco openserver release 5 and have dsl installed ,, the dsl modem is a bt router which in turn is connected to a vpn hardware router,, which also serves internet to the whole network ,, but i still cant connect to the internet via the unix box... (10 Replies)
I want to have 7 search domains in my resolv.conf, but it seems to like only the first six.
I read somewhere that the OS will only recognize the first 6 (or the first 154 characters). Is that the case with SUSE 10?
thx
-Kevin (2 Replies)
Hi I have DNS setup on Solaris 10 thought it isn't reoslveing Internet addresses properly
If I traceroute The UNIX and Linux Forums - the Top UNIX & Linux Q&A on the Web, I get to a hop to my DSL router but no further hops
- DNS Client & Multicast services are running
- nsswitch.conf is... (1 Reply)
Hi everyone
A quick question during a audit this was determined to be a security issue
In the resolv.conf there is a “.” At the end of the domain name
Like this
domain mydomain.com.
I which to understand the function or significance of the .
thk (3 Replies)
Hi all,
I am doing an assignment and there is something I am confused about.
The requirement is to set up the DNS and sendmail to two domains: lab1 and lab2, with hosts of mail.lab1 and mail.lab2 both acting as DNS server and email server, and send mail from root@lab1 to root@lab2. However, it... (4 Replies)
Hi,
My resolv.conf keeps overwritten. I want to have it to just keep the setting that I put in there. I tried a few solutions I found using google.
like supersede domain-name "xxx", prepend domain-name-servers xxx.xxx.xxx.xxx;
This does'nt work.
I also tried to just chmod the file to... (4 Replies)
hi,
I use red hat linux .
When I start up network service .
I get below error in eth2
root@vls etc]# service network restart
Shutting down interface eth2:
Shutting down loopback interface:
Bringing up loopback interface:
Bringing up interface eth2: RTNETLINK answers: File exists
Error... (10 Replies)
Hi all, :(
I am facing issue while I have updated in resolv.conf, after nework service restart, it was automatically deleted IP from resolv.conf file.
Could you please let me know what is the reason resolv.conf deleted any IP which I have manually updated, but it store only my router IP... (3 Replies)
Hi,
I've installed Solaris 11.3(live media) and configured DNS. Everytime I reboot the server, resolv.conf got deleted and it created a new nsswitch.conf.
I used below to configure both settings:
# svccfg -s dns/client
svc:/network/dns/client> setprop config/nameserver = (xx.xx.xx.aa... (1 Reply)
Discussion started by: flexihopper18
1 Replies
LEARN ABOUT MINIX
resolvxc
RESOLV.CONF(5) File Formats Manual RESOLV.CONF(5)NAME
resolv.conf - Domain Name System resolver configuration
SYNOPSIS
/etc/resolv.conf
DESCRIPTION
The /etc/resolv.conf is used to configure how the host will use the Domain Name System to resolve hostnames to IP addresses. It may con-
tain these two lines:
nameserver IP-address
domain domain-name
The nameserver entry tells the IP address of the host to use for DNS queries. If it is set to 127.0.0.1 (which is the default) then the
local name daemon is used that may use the /etc/hosts database to translate host names. You normally only need a nameserver entry if the
name server is at the other side of a router. The default nonamed name server can't look beyond the local network.
The domain entry tells the default domain to use for unqualified hostnames. This entry is usually not given in which case the domain of
the local host is used.
The long version of this story can be found in resolver(5).
FILES
/etc/resolv.conf DNS resolver configuration file.
SEE ALSO resolver(5), hosts(5), nonamed(8), boot(8).
AUTHOR
Kees J. Bot (kjb@cs.vu.nl)
RESOLV.CONF(5)