I have made the script,In its initial stage,Need to ask one question i am taking backup of reslov.conf with this name reslov.conf~ but a problem is that when next time script run it will over write the backup file with new value.see my code you will get what i m saying ,Please ans this ASAP,its urgent.THX TO ALL
I am new to unix. I have edited the /etc/resolv.conf. It shows
domain name
ip address
ip address
These are the same ips of the dns I use for windows. Still I get no name resolution on the internet. I can ping external ip's is there anything else I need to check? (1 Reply)
Hi ,,still struggling with unix ,,the system is running sco openserver release 5 and have dsl installed ,, the dsl modem is a bt router which in turn is connected to a vpn hardware router,, which also serves internet to the whole network ,, but i still cant connect to the internet via the unix box... (10 Replies)
I want to have 7 search domains in my resolv.conf, but it seems to like only the first six.
I read somewhere that the OS will only recognize the first 6 (or the first 154 characters). Is that the case with SUSE 10?
thx
-Kevin (2 Replies)
Hi I have DNS setup on Solaris 10 thought it isn't reoslveing Internet addresses properly
If I traceroute The UNIX and Linux Forums - the Top UNIX & Linux Q&A on the Web, I get to a hop to my DSL router but no further hops
- DNS Client & Multicast services are running
- nsswitch.conf is... (1 Reply)
Hi everyone
A quick question during a audit this was determined to be a security issue
In the resolv.conf there is a “.” At the end of the domain name
Like this
domain mydomain.com.
I which to understand the function or significance of the .
thk (3 Replies)
Hi all,
I am doing an assignment and there is something I am confused about.
The requirement is to set up the DNS and sendmail to two domains: lab1 and lab2, with hosts of mail.lab1 and mail.lab2 both acting as DNS server and email server, and send mail from root@lab1 to root@lab2. However, it... (4 Replies)
Hi,
My resolv.conf keeps overwritten. I want to have it to just keep the setting that I put in there. I tried a few solutions I found using google.
like supersede domain-name "xxx", prepend domain-name-servers xxx.xxx.xxx.xxx;
This does'nt work.
I also tried to just chmod the file to... (4 Replies)
hi,
I use red hat linux .
When I start up network service .
I get below error in eth2
root@vls etc]# service network restart
Shutting down interface eth2:
Shutting down loopback interface:
Bringing up loopback interface:
Bringing up interface eth2: RTNETLINK answers: File exists
Error... (10 Replies)
Hi all, :(
I am facing issue while I have updated in resolv.conf, after nework service restart, it was automatically deleted IP from resolv.conf file.
Could you please let me know what is the reason resolv.conf deleted any IP which I have manually updated, but it store only my router IP... (3 Replies)
Hi,
I've installed Solaris 11.3(live media) and configured DNS. Everytime I reboot the server, resolv.conf got deleted and it created a new nsswitch.conf.
I used below to configure both settings:
# svccfg -s dns/client
svc:/network/dns/client> setprop config/nameserver = (xx.xx.xx.aa... (1 Reply)
Discussion started by: flexihopper18
1 Replies
LEARN ABOUT DEBIAN
whereami.conf
whereami.conf(5) File Formats Manual whereami.conf(5)NAME
whereami.conf -- configuration file for whereami
DESCRIPTION
The whereami.conf file specifies what whereami does on leaving, remaining at or arriving at locations.
(Locations are detected by whereami according to specifications in the detect.conf file.)
Comments are lines starting with the `#' character. Leading whitespace is ignored on all lines, including comment lines.
Other lines are of the form:
-location action
The action is performed if your system was previously at this location, but is now at another location.
=location action
The action is performed if your system is now at this location.
+location action
The action is performed if your system is now at this location, but was previously at another location.
!location action
The action is performed if your system is not at this location.
HELPER SCRIPTS
In addition to the normal commands available within any shell script, whereami includes a number of helper scripts which may be useful.
setmailrelay (none | queue [smarthost] | smarthost)
Set the mail relay (i.e. smarthost) to "none" if you have a permanent connection, and can send e-mail directly to the recipient's
mailserver.
If you are not connected, set the relay to "queue" (optionally for a specific smarthost).
Or send all mail to a specific smarthost, if that is what you need in this location.
setresolver <resolv.conf stanza>
The <resolv.conf stanza> should be something like: search localhost mydomain.com nameserver 1.2.3.4 (all on one line) to specify
the domain search path and the nameserver to use.
If you have resolvconf installed, this script will interface with that to manupulate the /etc/resolv.conf file and control DNS
resolution. This is recommended.
If you are not using resolvconf, then this will directly rewrite your /etc/resolv.conf file, inserting a section similar to the
manner in which DHCP works.
setproxy (start | stop | none | <upstream_proxy>)
Use this script to reconfigure your local oops or squid proxy server to use a specific upstream proxy, no upstream
proxy, or to stop the proxy server completely.
The upstream proxy should be specified as "<name or ip> <port>", e.g.: setproxy 192.168.55.3 3128
For a local squid proxy you can optionally also provide a complete set of parameters for the "cache_peer" directive (without the
"cache_peer" name itself). See the squid.conf file for full details of this syntax. e.g.: setproxy 192.168.55.3 parent 3128
3140 login=user:password
settimezone timezone
Use this to set your timezone differently.
masqmail_route route_name
Use this to reconfigure masqmail to use a different masqmail routing.
SEE ALSO whereami(8), detect.conf(5)
Further documentation is available in the /usr/share/doc/whereami directory.
FILES
/etc/whereami/whereami.conf
The file we are talking about in this here manpage.
/etc/whereami/whereiam.sh
The script that is built based on the information in this configuration file and then executed by whereami.
LIMITATIONS
There should be a configuration program so that the user does not have to do any script programming.
AUTHOR
This manual page was written by Andrew McMillan <debian@mcmillan.net.nz> for the Debian GNU/Linux system (but may be used by others). Per-
mission is granted to copy, distribute and/or modify this document under the terms of the GPL version 2.
whereami.conf(5)