Solaris 10. fcinfo hba-port shows adapter not Found Post: 302244686

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Sunblade shows 2 MAC address on same port

Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight....

2. UNIX for Dummies Questions & Answers

isa serial port adapter card no longer detectedworking

hi all, i've got an old PC with unix (SCO System V/386 rel. 3.2) on it. Pentium I; 128mb; ISA 2-port RS232 serial adapter card for an oki dot-matrix printer. (no usb, no CD) i've been running an old cobol program to do some invoicing and print reports. some time back i changed the...

3. IP Networking

4GB Dual Port HBA

I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB? Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks.

4. Solaris

Solaris9 - qlogic HBAs - luxadm reports "Found path to 0 HBA ports"

Hi All, I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices.. bash-2.05# luxadm -e port Found path to 0 HBA ports bash-2.05# luxadm probe No Network Array enclosures found in /dev/es...

5. AIX

20EE0008 : No adapters found Adapter, Riser, System Bd.

Hello, When I try to upgrade AIX from 5.1 to 5.3 I get this error message 20EE0008 : No adapters found Adapter, Riser, System Bd. Anyone know anything about it ?

6. Solaris

Few things related to HBA port & fcinfo command

Hi Gurus I need to know few things related to HBA port & fcinfo command I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above...

7. Solaris

luxadm -e port shows one port not connected

hi i have a sun machine which has one hba 2ports; out of which one port says it is not connected # luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED /devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED but both...

8. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

9. AIX

NPIV with 8Gb PCI Express Dual Port FC Adapter

All I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable: $ lsnports name physloc ...

10. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT CENTOS

tapset::scsi

tapset::scsi(3stap)													       tapset::scsi(3stap)

NAME

       tapset::scsi - systemtap scsi tapset

DESCRIPTION

	This family of probe points is used to probe SCSI activities.

       scsi.ioentry
	      Prepares a SCSI mid-layer request

	       See probe::scsi.ioentry(3stap)
	       for details.

       scsi.iodispatching
	      SCSI mid-layer dispatched low-level SCSI command

	       See probe::scsi.iodispatching(3stap)
	       for details.

       scsi.iodone
	      SCSI command completed by low level driver and enqueued into the done queue.

	       See probe::scsi.iodone(3stap)
	       for details.

       scsi.iocompleted
	      SCSI mid-layer running the completion processing for block device I/O requests

	       See probe::scsi.iocompleted(3stap)
	       for details.

       scsi.ioexecute
	      Create mid-layer SCSI request and wait for the result

	       See probe::scsi.ioexecute(3stap)
	       for details.

       scsi.set_state
	      Order SCSI device state change

	       See probe::scsi.set_state(3stap)
	       for details.

SEE ALSO

	  probe::scsi.ioentry(3stap),	   probe::scsi.iodispatching(3stap),	  probe::scsi.iodone(3stap),	 probe::scsi.iocompleted(3stap),
       probe::scsi.ioexecute(3stap),  probe::scsi.set_state(3stap),  stap(1), stapprobes(3stap)

IBM
									---						       tapset::scsi(3stap)

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Sunblade shows 2 MAC address on same port

Discussion started by: GoneCrazy

2. UNIX for Dummies Questions & Answers

isa serial port adapter card no longer detectedworking

Discussion started by: frankpky

3. IP Networking

4GB Dual Port HBA

Discussion started by: jwholey

4. Solaris

Solaris9 - qlogic HBAs - luxadm reports "Found path to 0 HBA ports"

Discussion started by: ilan