10-06-2008
Quote:
Originally Posted by
solaris8in
Dear All,
I am facing a specfic problem with my New SunFire T2000.Recently we bought new sunfire T2000 sparc server.When i am trying to install solaris 10 through cdrom , I get error messgae
Error:Last Trap: Instaruction Access Exception
{0} ok boot cdrom
Boot device: /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Redirected to slice: 1
Loading: /platform/SUNW,Sun-Fire-T200/ufsboot
Loading: /platform/sun4u/ufsboot
ERROR: /pci@780/pci@0/pci@9/scsi@0: Error:Last Trap: Instaruction Access Exception
[Exception handlers interrupted, please file a bug]
[type 'resume' to attempt a normal recovery]
{0} ok boot cdrom
SC Alert: Host System has Reset
SC Alert: Host system has shut down
I get this error when iam trying to install through GUI(Sun Monitor is physically connected to the T2000 server) if i try installing solaris 10 through console mode iam able to install .My Team leader need monitor to be physically connected to the server.My display card is xvr 300
Can any one help me out on this issuse
For a T2000 you need solaris 10 update 3 minimum. This release has the required drivers included.
9 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I was trying to test run a /bin/bash script i had just written when my monitor suddenly went blank.I had to shut down the machine from the systems main power. I was unable to boot afterwards and soo i went for the interactive boot process by typing boot -a.
I succeded in the first stage of the... (1 Reply)
Discussion started by: lealyz
1 Replies
2. Solaris
Hi,
I have a Sun 3500 server on which i installed solaris 8 and have also installed veritas 4.0 on it. i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.... i have got to connect a laptop to the serial port of the server and... (3 Replies)
Discussion started by: ishila
3 Replies
3. UNIX for Dummies Questions & Answers
Hello all,
I'm lost and can't figure this problem out.
I have a Sun fire 280R running Solaris 8. Everything was working great. I have one drive in bay 1(not 0). But when I reboot the system it trys to open files in /dev/rdsk/c1t1d0s0. Should it have been opeing /dev/rdsk/c1t0d0s0, the... (4 Replies)
Discussion started by: larryase
4 Replies
4. Solaris
Hi,
I have a sun ultra enterprise 450 server. This server powers on and a white screen appears with the system and network information.
But it doesnot boot up completely. Booting operation wil be halted by a warning:
\usr\sbin\fsck not found. Most likely the mount of \usr failed or the... (5 Replies)
Discussion started by: tgashwini
5 Replies
5. Solaris
I am new to Sun.
I brought Sun Fire 280R to practice UNIX. What are the requirements for the monitor/CRT? Will it burn out old non-Sun CRTs? Does it need LCD monitor?
Thanks. (3 Replies)
Discussion started by: bramptonmt
3 Replies
6. Solaris
First of all it's shut down 60 second after power on and write on console :
SC Alert: Correct SCC not replaced - shutting managed system down!
This is cured by moving out battery from ALOM card.
Now server start to loop during the testing.
That's on the console:
>@(#) Sun Fire V440,Netra... (14 Replies)
Discussion started by: Alisher
14 Replies
7. Solaris
Dear Team,
I need some expert advice to my problem.
We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Discussion started by: sudhansu
5 Replies
8. Solaris
Booting problem on Sun 3500
Hi,
I have a Sun 3500 server on which i installed solaris 5.2 installed . i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.i got a message Sync file system than restart
some times showing ok... (2 Replies)
Discussion started by: najeer
2 Replies
9. Solaris
Hello,
I have purchaced an old SUn fire x2270 server .
I wanted to make ILOM upgrade to the latest version of software :
ILOM 3.0.9.18.a r126592
BIOS vers. 2.09
Server 2.2.3
(10-Aug-2018)
Because my version is very outdated.
But i can't download the updatebecause it's require... (4 Replies)
Discussion started by: LouisLakoute
4 Replies
LEARN ABOUT SUNOS
installboot
installboot(1M) installboot(1M)
NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)
WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)