Hi, I want to build a whole network on my own, but i see its not quite simple. I have a Dlink DSL-320T router for an ANNEX A ADSL connection.
A here is the first issue:
When i connect to the DSL-320T modem the modem get me an ip thru DHCP 192.168.1.101 (Ip of modem is 192.168.1.100). But after the modem connect to the ISP provider it gives to the rtls0 interface a ip like 83.4.204.22...
The other interface on this machine is bge0 with static ip 192.168.1.1
How do i make that PC1 can connect to the internet via the modem? I can see the bge0 but not the 192.168.1.100 modem.
I already made:
#svcadm -e ipv4_forwarding -u
#svcadm -e ipv4_routing -u
The output from "routeadm" shows that routing and forwarding is enabled.
I have two networks which is not connected to each other. Each network has its own internet connection. I also have one Solaris machine with two NICs connected to both of the networks.
How do I use the Solaris to connect both network so that hosts from either side of the network can... (9 Replies)
I just sys-unconfigged my ultra sparc which is on my home network where I have 2 PCs attached. When I go to install Solaris 8, it asks various things re: networking. Specifically, when it asks for the IP addy for the DNS server, I input the info, but it barfs back "IP addy info not found". I... (10 Replies)
I have SURFboard SB6120 Modem which is compartable with Unix and I would like a wireless router with comparable speed and security. I have been looking at the Linksys wireless WRT610N model but I don't know if it is compartable with Solaris. I have been researching but I have not come across any... (2 Replies)
hi guys,
its been a while since my last visit here,
could not keep up the pace on this ever changing industry :)
i'd just doing my home research under vmware to make a solaris-based router-firewall using zones - doing a lot of reading about zones & review solaris zone functionality.
and... (4 Replies)
I set up remote printing on a clients Unix server to my Windows XP USB printer. My USB printer is connected directly to my PC (no print server and no network input on printer). With my Win XP PC connected to my cable modem (without the router), i can do
lp -dhp842c /etc/hosts and it prints. I... (7 Replies)
Upon replacing my linux router/server with a Solaris one I've noticed very poor network performance. The server itself has no issues connecting to the net, but clients using the server as a router are getting a lot of IP fragments as indicated from some packet sniffing I conducted.
Here was my... (3 Replies)
Discussion started by: vectox
3 Replies
LEARN ABOUT PHP
faxstate
FAXSTATE(8) System Manager's Manual FAXSTATE(8)NAME
faxstate - control ``modem state'' of a device used by HylaFAX
SYNOPSIS
/usr/sbin/faxstate [ -q queue-dir ] [ -s state ] [ -n ] modem
DESCRIPTION
faxstate sends a message to the HylaFAX faxgetty(8) process servicing modem telling it to use the specified state when notifying the
HylaFAX scheduler that a modem is ready and available for use. This is useful for controlling outbound use of a modem; by marking a
modem's state as busy or down the HylaFAX scheduler will not assign any outbound jobs to the modem.
The specified modem can either be the name (typically the last component of the terminal port the modem is attached to), or the full name
of the associated FIFO named pipe file, e.g. ``FIFO.ttym2''.
If the -n option, faxstate emulates what faxgetty would do; sending a message directly to the faxq process marking the specified modem
down, busy, or ready. This interface is useful for send-only environments in which faxgetty processes are not used. Note that modems
manipulated in this way must previously have been configured with the faxmodem(8) program.
OPTIONS
The following options are supported:
-n Contact faxq directly instead of faxgetty.
-q dir Use a spooling area other than /var/spool/hylafax.
-s Specify the state to send the faxq process each time the modem becomes ready for use; one of ``busy'', ``down'', and ``ready''.
The default state to use is ready.
FILES
Consult hylafax-server(5) for a complete discussion of the structure and content of the spooling area.
SEE ALSO hylafax-server(5), faxgetty(8)
July 17, 1995 FAXSTATE(8)