09-26-2008
Thanks DukeNuke2,
These commands are working.....
9 More Discussions You Might Find Interesting
1. Solaris
Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with... (5 Replies)
Discussion started by: kduffin
5 Replies
2. Solaris
Hi all,
I have a compatibly issues with a new hardware
My config is the following one :
Solaris 10
V490 Hardware
2 X HBA Qlogic 2310f cards
An HP EVA 5000 for storage ...
Veritas VxVM 4.1 MP1
When I reboot my server, VxVM is trying to mount/use the volume before it's... (0 Replies)
Discussion started by: unclefab
0 Replies
3. Solaris
Hi ,
How can I collect information about any Hardware , specially HBA (Host Bus Adapter) ....
I tried prtdiag but it is not shoing the HBA details.
Regards (4 Replies)
Discussion started by: adel8483
4 Replies
4. Solaris
Due to speed mismatch, the server kept crashing. Sun suggests that I need to move the two HBA cards from the 66Mhz to the 33Mhz slots. There are tons of disks that are connected to these HBAs and I have Veritas volume manager.
Does anyone have a list of what I need to do prior/after moving to... (3 Replies)
Discussion started by: kiem
3 Replies
5. UNIX for Advanced & Expert Users
Hi,
I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine.
The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards.
Can anyone suggest how to determine my HBA hardware ?
Thanks,
Ron.
... (3 Replies)
Discussion started by: ronbarak
3 Replies
6. Solaris
Hi,
I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine.
The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards.
Can anyone suggest how to determine my HBA hardware ?
Thanks,
Ron.
... (4 Replies)
Discussion started by: ronbarak
4 Replies
7. Solaris
Hi all,
I managed to get WWN port number & node from trying on
luxadm -e port
luxadm -e dump_map <device>
I wanted to ask how can i get additional information such as company name, size etc of the HBA? Is it possible to get it through command? Thanks. (3 Replies)
Discussion started by: beginningDBA
3 Replies
8. BSD
Hi,
The title is a bit misleading, but it seems I can't re-edit the title after creating the post - apologies.
I have been handed a variety of servers, whereas quite a few of these are older FreeBSD (4.8, thank you legacy). I now have one of these servers which has a HBA card installed, and... (0 Replies)
Discussion started by: brightstorm
0 Replies
9. Red Hat
hi all,
I am trying to view the hba cards on a rhel7 server (storage says they are there, but I am not seeing them.
I tried lspci -nn | grep -i hba
lspci |grep qla
I tried looking in /sys/class/fc_host.. but it is empty.
I am not sure if I am looking in the right spot... (0 Replies)
Discussion started by: gartie
0 Replies
LEARN ABOUT SUNOS
hba_refreshadapterconfiguration
HBA_RefreshInformation(3HBAAPI) Common Fibre Channel HBA Information Library Functions HBA_RefreshInformation(3HBAAPI)
NAME
HBA_RefreshInformation, HBA_RefreshAdapterConfiguration - refresh information for a specific HBA
SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ]
#include <hbaapi.h>
void HBA_RefreshInformation(HBA_HANDLE handle);
void HBA_RefreshAdapterConfiguration(void);
PARAMETERS
handle an open handle returned from HBA_OpenAdapter(3HBAAPI)
DESCRIPTION
The HBA_RefreshInformation() function requests that the underlying VSL reload all information about the given HBA. This function should be
called whenever any function returns HBA_STATUS_ERROR_STALE_DATA, or if an index that was previously valid returns HBA_STATUS_ERROR_ILLE-
GAL_INDEX. Because the underlying VSL can reset all indexes relating to the HBA, all old index values must be discarded by the caller.
The HBA_RefreshAdapterConfiguration() function updates information about the HBAs present on the system. This function does not change any
of the relationships between the HBA API and adapters that have not been reconfigured. HBA handles continue to refer to the same HBA even
if it is no longer installed. The HBA name or index assigned by the library remains assigned to the same HBA even if it has been removed
and reinstalled, as long as the bus position, WWN, and OS device have not changed. Adapter that have been removed and not replaced cannot
have their HBA handles, HBA names, and HBA indexes reassigned. Calls to these adapters will generate HBA_STATUS_ERROR_UNAVAILABLE.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard: FC-MI 1.92 (API |
| |version 1) |
+-----------------------------+-----------------------------+
| |Standard: FC-HBA Version 4 |
| |(API version 2) |
+-----------------------------+-----------------------------+
|MT-Level |Safe |
+-----------------------------+-----------------------------+
SEE ALSO
HBA_OpenAdapter(3HBAAPI), libhbaapi(3LIB), attributes(5)
T11 FC-MI Specification
SunOS 5.10 1 Sep 2003 HBA_RefreshInformation(3HBAAPI)