Is there any cut or awk function that would allow me to take the last part of a path away and save the list into a file? I wrote:
find $HOME -mtime +3 > fileList
cat fileList
/home/102/s/jn/folder/HW
/home/102/s/jn/otherfolder/B.txt
/home/102/s/jn/folder4/3dA/w... (1 Reply)
Greetings.
I am struggling with a shell script to make my life simpler, with a number of practical ways in which it could be used. I want to take a standard text file, and pull the 'n'th word from each line such as the first word from a text file.
I'm struggling to see how each line can be... (5 Replies)
First I have to say thank you to this community and this forum. You helped me very much builing several useful scripts.
Now, I can't get a solution the following problem, I'm stuck somehow. Maybe someone has an idea.
In short, I dump a site via lynx and pipe the output in a file. I need to... (7 Replies)
File having data in following format :
file name : file.txt
--------------------
111111;name1
222222;name2
333333;name3
I want to read this file so that I can split these into two paramaters i.e. 111111 & name1 into two different variables(say value1 & value2).
i.e val1=11111 &... (2 Replies)
Hello,
How to cut a char(s) for a word using perl??
I want to cut the number(s) from these sample words:
Port-channel24
Po78
Po99
Port-channel34
$word = "Port-channel24";
I want to put only the number in a varible.
Appreaciate using simple way in order to use it... (3 Replies)
I have a file that has the words I want to find in other files (but lets say I just want to find my words in a single file). Those words are IDs, so if my word is ZZZ4, outputs like aaZZZ4, ZZZ4bb, aaZZZ4bb, ZZ4, ZZZ, ZyZ4, ZZZ4.8 (or anything like that) WON'T BE USEFUL.
I need the whole word... (6 Replies)
Can someone help me to make this code without cutting off words ni the string?
awk '{for(i=1;i<length;i+=100) print substr($0,i,100)}'
Thank you! (4 Replies)
I have a file input.txt which have loads of weird characters, html tags and useful materials. I want to display 35 characters after the word "description" excluding weird characters like $&lmp and without html tags in the new file output.txt. Help me. Thanx in advance. I have attached the input... (4 Replies)
Hi All,
I am looking for a perl/awk/sed command to auto-increment the numbers line in file, P1.tcl:
run_build_model sparc_ifu_dec
run_drc
set_faults -model path_delay -atpg_effectiveness -fault_coverage
add_delay_paths P1
set_atpg -abort_limit 1000
run_atpg -ndetects 1000
I would like... (6 Replies)
I have a multicolumn text file with header in the first row like this
The headers are stored in an array called . which contains I want to search for each elements of this array from that multicolumn text file. And I am using this awk approach
for ii in ${hdr}
do
gawk -vcol="$ii" -F... (1 Reply)
Discussion started by: Atta
1 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)