09-20-2008
Your tape drive should be cleaned once every 25hrs. Do you follow that?
Perform some cleaning first. Detach the tape drive. If possible reboot the system. If not, attachback the tape drive and run devfsadm -C .
Mkae sure the drive is detected then you do a simple backup and restore using a NEW tape. Try this first
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
hello,
I don't know what exactly the cause and the solution!!
suddenly I receive this error message when I want to use the 8mm tape drive
"I/O write error"
I disconnect the tape drive and I hook it in another WS and I receive this error :- ... (5 Replies)
Discussion started by: geoquest
5 Replies
2. Linux
Hi,
Will someone help in giving the clue to installating Travan Tape drive on Redhat 8.0
Kayode (1 Reply)
Discussion started by: kayode
1 Replies
3. UNIX for Advanced & Expert Users
I have a hp d 350 running on 10.2,im having a problem with the dds2 tape drive whenever i tried backing up larger files...i have remove the tape driver and add it using sam again but still the tape drive is not working .....is there a solution to this problem?
# tar cvf /dev/rmt/0m priso.ds
a... (3 Replies)
Discussion started by: giriplug
3 Replies
4. Solaris
Hi,
I am a newbie to Solaris, I have a SunFire V120 box, i was trying to install a tape drive(HP SureStore DAT24), i did the install in this manner.
# rm -rf /etc/path_to_inst
# init 6
later at the "ok" prompt i gave "boot -ar" after doing that it asked me various options i accepted the... (2 Replies)
Discussion started by: rajendra.rait
2 Replies
5. SCO
i have an ibm machine with dds4 drive running sco. i bought new hp dds4 tape for my back-up. the new tapes are not being read by the system, it says tape error, no such device. i've already clean the drive several times but still the same error occur. i've tried to use the same tape on our windows... (3 Replies)
Discussion started by: yackim
3 Replies
6. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
7. Solaris
I have a hard drive that we are trying to jumpstart in a sunblad 1500. we keep getting errors. I placed the drive in my 1500. I want to wipe the drive clean because for some reason it has a partition table. and when i go to format and try to format the drive it says it can not use a program. is... (5 Replies)
Discussion started by: deaconf19
5 Replies
8. SCO
when I do a tape status /dev/rStp0 I get the following on a new tape and I have tried several:
Status : ready beginning-of-tape
soft errors : 0
hard errors: 2
underruns: 5
My BackupEdge has stopped backing up my system because it asks for a new volume yet my total system data is under 20... (5 Replies)
Discussion started by: psytropic
5 Replies
9. AIX
Hi All
I am trying to copy files present in a partition (server 2) which is mounted to a different server (server 1) as tape drive is connected to it. I ran the below command to copy files within a partition:
svr01:root:/sunfileserver> tar -cvf *
a <foldername>/<filename>/<filename>
a... (4 Replies)
Discussion started by: vathsan
4 Replies
10. Solaris
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0... (2 Replies)
Discussion started by: h@foorsa.biz
2 Replies
tz(4) Kernel Interfaces Manual tz(4)
Name
tz - SCSI magnetic tape interface
Syntax
VAX NCR 5380:
adapter uba0 at nexus?
controller scsi0 at uba0 csr 0x200c0080 vector szintr
tape tz0 at scsi0 drive 0
VAX DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC KZQ:
adapter uba0 at nexus?
controller kzq0 at ibus? csr 0761300vector sii_intr
tape tz0 at kzq0 drive 0
RISC NCR ASC:
adapter ibus0 at nexus?
controller asc0 at ibus? vector ascintr
tape tz0 at asc0 drive 0
Description
The SCSI tape driver provides a standard tape drive interface as described in This is a driver for any Digital SCSI tape device.
For the TZK10 QIC format tape drive, the densities supported are QIC-24 (read only) block size of 512 byte blocks, QIC-120, and QIC-150
read/write block size of 512 byte blocks, and QIC-320 read/write block size of 1024 byte blocks. With QIC format style tapes all reads and
writes must be in multiple of the block size. This is a requirement of fixed block tape drives because record boundaries are not pre-
served. The QIC densities are selected using the following special device names:
QIC-24 Fixed block size.
QIC-120 Fixed block size.
QIC-150 Fixed block size.
QIC-320 Fixed block size.
With all fixed block tape devices a of a file to the tape must be padded out. An example of this is a of which has a size of approximately
3800 bytes.
dd if=/etc/gettytab of=/dev/rmt0h bs=10k conv=sync
or
dd if=/etc/gettytab of=/dev/rmt0l bs=512 conv=sync
The option of pads the output to block size.
This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape drives). See for further
details.
Tape Support
TZ30, TZK50, TLZ04, TSZ05, TKZ08, TZK10
Diagnostics
All diagnostic messages are sent to the error logger subsystem.
Files
See Also
mtio(4), nbuf(4), SCSI(4), MAKEDEV(8), uerf(8), tapex(8)
Guide to the Error Logger
tz(4)