09-17-2008
In order to not to be confused, you may ask the PL mahadib, on which port the cable is connected to instead. Ask him to check what is "written/engraved" near to the port he's connecting to. We will be much clearer if he's talking abt the ethernet OR serial port..
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hi,
I have been facing a telnet problem with our SunOS 5.7 box. Initially we were facing porblems in login both from the console as well as through telnet. The machine was hard-booted after which login from console is possible, but telnet connection is not.
The error that is displayed is... (1 Reply)
Discussion started by: manoj_gopal
1 Replies
2. UNIX for Dummies Questions & Answers
Ok I am new to this and wondering if there is any way of connecting a cable modem to an SGI that is running IRIX 6.5 and how to do it... (1 Reply)
Discussion started by: Acidjack
1 Replies
3. Shell Programming and Scripting
I was wondering if anyone can help me out with a Solaris 9, FTP problem.
The problem is this. One of our scripts recently attempted to send files to a MS server, using FTP, and some error occurred. Because the script didn't trap for errors we didn't know about the problem until things started... (3 Replies)
Discussion started by: BCarlson
3 Replies
4. Solaris
Hi All,
I have installed Solaris 9 on on an AMD Opteron based server.
The server is rebooting after i perform the following:
- Logon to Solaris 9 AMD box through telnet or putty
- ftp to any other box suppose box A where the FTP server is running
- After logging in to the box A through... (1 Reply)
Discussion started by: jsvarma
1 Replies
5. Solaris
Hi ,
I faced a very strange problem when I unzip a zip file on my solaris workstation. Actually I wanted to transfer a folder, say it TEST which contains some sub-folders inside it from windows to solaris machine. So I zipped this folder to TEST.ZIP on my windows machine.
Then from my... (11 Replies)
Discussion started by: Raj Kumar Arora
11 Replies
6. Solaris
Hi,
I am unable to login into my terminal hosting Solaris 10 and get the below error message
"Server refused to allocate pty
ld.so.1: sh: fatal: libc.so.1: open failed: No such file or directory "
Is there anyways i can get into my machine and what kind of changes are required to be... (7 Replies)
Discussion started by: sankasu
7 Replies
7. Solaris
Hi all,
Previously I had both opensuse 11.3 and Windows XP SP2 on my PC, there was no problem at all.I was able to access all documents in Windows from opensuse.
Now when I wanted to install solaris 10 on the same machine there were 2 problems ...
1. Windows is not accessible from solaris... (3 Replies)
Discussion started by: M.Choudhury
3 Replies
8. Hardware
Hello,
I want to connect a VT520 terminal to p3 linux box.
I have two questions regarding the connection. First,
is it possible to use RJ45 instead of RS232
cable. (with DB9 pin to RJ45 and DB25 to RJ45 converter).
Second point is that; do i need null modem cable or
straight cable... (5 Replies)
Discussion started by: vectrum
5 Replies
9. UNIX for Advanced & Expert Users
Hi Am using unix Ksh
Am getting the problem while transferring zero size files through the script .
When i transfer zero size files from local machine to remote machine manually i can able to do it .
My question its beause of zero size files am not able to transfer through script ? or its... (2 Replies)
Discussion started by: Venkatesh1
2 Replies
10. Linux
Hi,
Could you please help me with the below issue..
I'm running RHEL6 OS on both server (192.168.0.10) and client machines (192.168.0.1).
I'm trying to connect to server from the client machine using ftp service.
I have installed vsftpd daemon on both the machines.
I'm getting... (4 Replies)
Discussion started by: raosr020
4 Replies
CZ(4) BSD Kernel Interfaces Manual CZ(4)
NAME
cz -- Cyclades-Z series multi-port serial adapter device driver
SYNOPSIS
cz* at pci? dev ? function ?
DESCRIPTION
The cz device driver supports the Cyclades-Z series of multi-port serial adapters. The Cyclades-Z is an intelligent serial controller com-
prising:
o PLX9060ES PCI bus interface
o Xilinx XC5204 FPGA
o IDT R3052 MIPS CPU
The MIPS CPU runs firmware provided by the device driver. Communication with the MIPS is performed by modifying data structures located in
board local RAM or host RAM.
The Cyclades-Z comes in three basic flavors:
o Cyclades-8Zo rev. 1 -- This is an older 8-port board with no FPGA. The serial ports are provided by an octopus cable.
o Cyclades-8Zo rev. 2 -- This is the newer 8-port board. The serial ports are provided by an octopus cable.
o Cyclades-Ze -- This is the expandable version of the Cyclades-Z. It uses an HD-50 SCSI cable to connect the board to a 1U rack
mountable serial expansion box. Each box has 16 RJ45 serial ports, and up to 4 boxes may be chained together, for a total of 64
ports. Boxes 3 and 4 require their own external power supply, otherwise the firmware will refuse to start (as it cannot communi-
cate with the UARTs in those boxes).
The Cyclades-Z has several features to improve performance under high serial I/O load:
o The board may operate in interrupt-driven mode or polled mode to reduce interrupt load.
o Each channel has a large input and output buffer.
o Each channel may be programmed to generate an interrupt based on reception of a specific character, e.g. a PPP End-Of-Frame charac-
ter.
o The MIPS CPU on the board performs all flow-control handling.
FILES
/dev/ttyCZnnnn -- dial-in (normal) TTY device
/dev/dtyCZnnnn -- dial-out TTY device
SEE ALSO
pci(4), termios(4), tty(4)
HISTORY
The cz driver first appeared in NetBSD 1.5.
AUTHORS
The cz driver was written by Jason R. Thorpe <thorpej@zembu.com> and
Bill Studenmund <wrstuden@zembu.com> of Zembu Labs, Inc.
BUGS
The cz driver does not currently implement communication via host RAM. While this may improve performance by reducing the number of PCI mem-
ory space read/write cycles, it is not straightforward to implement with the current bus_dma(9) API.
Interrupt mode has not been tested.
There is no support for reading or writing the EEPROM connected to the PLX PCI bus controller.
BSD
May 17, 2000 BSD