09-12-2008
same issue
please help !!!
Sep 11 23:14:17 azvs2a scsi: [ID 107833 kern.warning] WARNING: /scsi_vhci/ssd@g600c0ff0000000000b5b835f99ee1802 (ssd5):
Sep 11 23:14:17 azvs2a SCSI transport failed: reason 'tran_err': retrying command
Sep 11 23:14:17 azvs2a fp: [ID 517869 kern.info] NOTICE: fp(1): PLOGI to a3 failed state=Packet Transport error, reason=No Connection
Sep 11 23:14:17 azvs2a fctl: [ID 517869 kern.warning] WARNING: 44=>fp(1)::PLOGI to a3 failed. state=e reason=5.
Sep 11 23:14:17 azvs2a scsi: [ID 243001 kern.warning] WARNING: /pci@1c,600000/SUNW,qlc@1,1/fp@0,0 (fcp1):
Sep 11 23:14:17 azvs2a PLOGI to D_ID=0xa3 failed: State:Packet Transport error, Reason:No Connection. Giving up
Sep 11 23:14:18 azvs2a fp: [ID 517869 kern.info] NOTICE: fp(0): PLOGI to 9f failed state=Packet Transport error, reason=No Connection
Sep 11 23:14:18 azvs2a fctl: [ID 517869 kern.warning] WARNING: 52=>fp(0)::PLOGI to 9f failed. state=e reason=5.
Sep 11 23:14:18 azvs2a scsi: [ID 243001 kern.warning] WARNING: /pci@1c,600000/SUNW,qlc@1/fp@0,0 (fcp0):
Sep 11 23:14:18 azvs2a PLOGI to D_ID=0x9f failed: State:Packet Transport error, Reason:No Connection. Giving up
10 More Discussions You Might Find Interesting
1. HP-UX
Hello,
I am a new member of this forum. I am trying to solve a following problem with CDE in HPUX 11. The error is Error: XDMCP timed out. State=4 (CollectBroadcastQuery). I have uncommented the following lines from the Xaccess file -
* grant service to all remote displays
* ... (0 Replies)
Discussion started by: shad
0 Replies
2. Solaris
Hello experts.
I am using Solaris 10(2005) on intel machine. I have installed Veritas Volume manager 5.0. I am unable to bring a disk error to online state. I would like to bring that disk to CDS format.
Commands i used and output are....
#vxdisk list
DEVICE TYPE ... (11 Replies)
Discussion started by: younus_syed
11 Replies
3. UNIX for Advanced & Expert Users
Dear Friends,
I am using Solaris 10 on Sun Sparc T5120 with 4 HDD(Raid).I am getting transport error in one of my mirrored HDD c1t2d0. Below is a screen shot. I have replaced the HDD with new one but still the same. Any one can help????
c1t2d0 Soft Errors: 0 Hard Errors: 0... (1 Reply)
Discussion started by: solaris5.10
1 Replies
4. Solaris
Hi,
i got the following error when i tried to access the cygwin x server from a windows XP PC.
"xdmcp fatal error session failed session 23 failed for display"
Alternatively, when i tried to access the same Cygwin X Server from another windows XP PC which is on a different LAN... (3 Replies)
Discussion started by: HarishKumarM
3 Replies
5. UNIX for Advanced & Expert Users
Hi,
I am trying to sftp a large file(appx. 2 GB size) from solaris 10 to a Linux server. While sftping(with no options), connection is terminated after some time with broken pipe error. sftp with option -R1 or -B1500 is successful.
Linux server ssh Version: OpenSSH_3.9p1, OpenSSL 0.9.7a... (3 Replies)
Discussion started by: brij123
3 Replies
6. Solaris
hi all
i am getting following error while starting V250 server on console we are not able to go to OBP also.
RED State Exception
Error enable reg: 0000.0000.0000.0000
CPU 0000.0000.0000.0001 AFSR 0030.02ae.18c0.00b7 Multiple PRIV UCU CPU WDU EDU U E CE FRC FRU (2 Replies)
Discussion started by: nikhil kasar
2 Replies
7. AIX
Hi Admins,
I am having a whole system lpar in open firmware state on HMC.
How can I bring it to running state ?
Let me know. Thanks. (2 Replies)
Discussion started by: snchaudhari2
2 Replies
8. AIX
(5 Replies)
Discussion started by: Vishal_dba
5 Replies
9. Shell Programming and Scripting
Hello,
on Solaris ping command does not report failed packet as in i.e. Windows (Connection timeout)
Instead it reports the sequence of the sent packet:
64 bytes from 10.80.4.120: icmp_seq=11. time=36.0 ms
64 bytes from 10.80.4.120: icmp_seq=12. time=35.9 ms
64 bytes from 10.80.4.120:... (6 Replies)
Discussion started by: drbiloukos
6 Replies
10. AIX
Hello,
This is a test/lab LPAR. Recently installed and updated the SP/TL. everything seems to be working fine. (ran all post install checks)
I checked the state of boot record, received the following error/failed message. Can you please explain what does this mean ?
/>ipl_varyon -i
... (1 Reply)
Discussion started by: dio34
1 Replies
fp(7d) Devices fp(7d)
NAME
fp - Sun Fibre Channel port driver
DESCRIPTION
The fp driver is a Sun fibre channel nexus driver that enables fibre channel topology discovery, device discovery, fibre channel adapter
port management and other capabilities through well-defined fibre channel adapter driver interfaces.
The fp driver requires the presence of a fabric name server in fabric and public loop topologies to discover fibre channel devices. In pri-
vate loop topologies, the driver discovers devices by performing PLOGI to all valid AL_PAs, provided that devices do not participate in
LIRP and LILP stages of loop initialization.
CONFIGURATION
The fp driver is configured by defining properties in the fp.conf file. The fp driver supports the following properties:
mpxio-disable
Solaris I/O multipathing is enabled or disabled on fibre channel devices with the mpxio-disable property. Specifying mpxio-disable="no"
activates I/O multipathing, while mpxio-disable="yes" disables the feature.
Solaris I/O multipathing may be enabled or disabled on a per port basis. Per port settings override the global setting for the specified
ports. The following example shows how to disable multipathing on port 0 whose parent is /pci@8,600000/SUNW,qlc@4:
name="fp" parent="/pci@8,600000/SUNW,qlc@4" port=0
mpxio-disable="yes";
manual_configuration_only
Automatic configuration of SCSI devices in the fabric is enabled by default and thus allows all devices discovered in the SAN zone to be
enumerated in the kernel's device tree automatically. The manual_configuration_only property may be configured to disable the default
behavior and force the manual configuration of the devices in the SAN. Specifying manual_configuration_only=1 disables the automatic con-
figuration of devices.
FILES
/kernel/drv/fp
32-bit ELF kernel driver (x86)
/kernel/drv/amd64/fp
64-bit ELF kernel driver (x86)
/kernel/drv/sparcv9/fp
64-bit ELF kernel driver (SPARC)
/kernel/drv/fp.conf
fp driver configuration file.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|mpxio-disable |Unstable |
+-----------------------------+-----------------------------+
|manual_configuration_only |Obsolete |
+-----------------------------+-----------------------------+
|Availability |SUNWfctl |
+-----------------------------+-----------------------------+
SEE ALSO
cfgadm_fp(1M), prtconf(1M), stmsboot(1M), driver.conf(4), attributes(5), fcp(7D), fctl(7D), scsi_vhci(7D)
Writing Device Drivers
Fibre Channel Physical and Signaling Interface (FC-PH) ANSI X3.230: 1994
Fibre Channel Generic Services (FC-GS-2) Project 1134-D
Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.272-1996
Fibre Channel Protocol for SCSI (FCP) ANSI X3.269-1996
SCSI-3 Architecture Model (SAM) Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996
SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996
SCSI Direct Attach (FC-PLDA) NCITS TR-19:1998
Fabric Loop Attachment (FC-FLA), NCITS TR-20:1998
SunOS 5.10 2 Dec 2004 fp(7d)