What is an HBA..? Post: 302234271

10 More Discussions You Might Find Interesting

1. Solaris

HBA Card

Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to...

2. AIX

Need HBA card driver

Hi All, SUN emulex HBA card has been installed on P520 box. When i run the cfgmgr i am getting the following message. lpar2#cfgmgr cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed....

3. UNIX for Advanced & Expert Users

openSuse 10.3 , Emulex HBA

hello, i have a dell Poweredge 2950 ( Server ) and an IBM storage device DS 3000 family ( Storage ) . I am supposed to link the IBM storage device to the Dell Poweredge via "Emulex 4Gb Fibre Channel Host Bus Adapter". I have put the addapter card in my server and connected it to the storage....

4. Filesystems, Disks and Memory

HBA performance

Hope I'm in the right place. I'm in the process of zoning HBA's to my new library environment. Is there a "rule of thumb" for the number of physical tape drives that you zone to an HBA? I don't want to run the risk of overloading an HBA. Any information would be greatly appreciated. Thanks.

5. Solaris

Offline HBA.

Hi, I have a HBA that is currently offline for some unknown reason. The device shows up in the prtdiag -v stating it is okay. How can I bring this back online? It was working okay until recently. It is currently connected to the SAN. Details below. # fcinfo hba-port HBA Port WWN:...

6. Solaris

accessing HBA details

Hi all, I managed to get WWN port number & node from trying on luxadm -e port luxadm -e dump_map <device> I wanted to ask how can i get additional information such as company name, size etc of the HBA? Is it possible to get it through command? Thanks.

7. Solaris

Please help...my HBA's won't configure

Hi, I have been given the task of configuring new SAN disks on two Solaris 10 boxes. The boxes in question have two dual channel QLogic FC cards, one port on each goes to an existing HDS SAN and are managed via HDLM. The intention is to connect the two free ports to a NetApp SAN and then...

8. Solaris

hba speed Solaris 9

Hello, In Solaris 10 I can use fcinfo to find what speed the hba ports are running at, am I able to find this out using Solaris 9? I have tried a few variations on luxadm but cant find anything relevant. Thanks.

9. Solaris

HBA problem...? at SF V890

Dear All, I need your help. I have server like this SunOS 5.10 Generic_141444-09 sun4u sparc SUNW,Sun-Fire-V890 with messages like this... Oct 10 17:07:52 iscsi: NOTICE: unrecognized ioctl 0x403 Oct 10 17:07:52 scsi: WARNING: /pseudo/fcp@0 (fcp0): Oct 10 17:07:52 Invalid...

10. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

LEARN ABOUT DEBIAN

ql-hba-snapshot

ql-hba-snapshot(8)					       System Administration						ql-hba-snapshot(8)

NAME

       ql-hba-snapshot - display specific information of the QLogic HBA.

SYNOPSIS

       ql-hba-snapshot <Host number> [OPTIONS]

DESCRIPTION

       FC HBA Snapshot Utility

       This  utility  displays	the  details  of  the QLogic HBA attached to the system. It uses one of the two file systems for scanning: proc or
       sysfs.

       <Host number> | <-a/--all> [optional]

	      Provide the <HOST NUMBER> to display the detailed information of the HBA.  With no option  specified,  general  information  of  all
	      hosts  will  be  displayed.   Ex.  # /usr/sbin/ql-hba-snapshot <Host Number> # /usr/sbin/ql-hba-snapshot --procfs <Host Number> (For
	      procfs)

       -h, --help

	      Prints the help message.	Ex.  # /usr/sbin/ql-hba-snapshot --help

       -hl, --hostlist

	      This option displays the list of QLogic hosts (HBAs) connected to this system.  The <HOST NUMBER> can be obtained by using following
	      command Ex.  # /usr/sbin/ql-hba-snapshot --hostlist

       -p, --parameters

	      This  option  displays  the  command  line parameters that can be passed to the QLogic HBA driver.  Ex.  # /usr/sbin/ql-hba-snapshot
	      --parameters <Host Number>

       -s, --statistics

	      This option displays the statistical information for specified host. Stastics option is only supported in "sysfs" based  scan.   Ex.
	      # /usr/sbin/ql-hba-snapshot --statistics <Host number/--all>

       -proc, --procfs

	      This options forces the the utility to scans information based on "procfs", instead of default sysfs.  Ex.  # /usr/sbin/ql-hba-snap-
	      shot --procfs [Other valid option]

       -v, --verbose

	      This enables verbose display. The detailed information of LUNs will be displayed in addition to standard one.  This option  is  only
	      supported in sysfs.  Ex.	# /usr/sbin/ql-hba-snapshot --verbose <Host number/-a>

SEE ALSO

       ql-dynamic-tgt-lun-disc(8), ql-lun-state-online(8), ql-set-cmd-timeout(8)

Matthias Schmitz <;matthias@sigxcpu.org> 			     July 2009							ql-hba-snapshot(8)

10 More Discussions You Might Find Interesting

1. Solaris

HBA Card

Discussion started by: xiaochensg

2. AIX

Need HBA card driver

Discussion started by: b_manu78

3. UNIX for Advanced & Expert Users

openSuse 10.3 , Emulex HBA

Discussion started by: nux007

4. Filesystems, Disks and Memory

HBA performance

Discussion started by: jwholey