|
|
Sponsored Content
Operating Systems
Solaris
A1000 Solaris 10 on Blade 1000
Post 302230833 by tribbles on Sunday 31st of August 2008 05:44:08 PM
08-31-2008
modinfo |grep FC
26 1289698 25070 118 1 ssd (SCSI SSA/FCAL Disk Driver 1.513)
27 12a69f8 192a0 103 1 fcp (SunFC FCP v20070529-1.123)
28 12bef08 8c00 - 1 fctl (SunFC Transport v20070529-1.57)
29 12c6218 18bb8 99 1 fp (SunFC Port v20070116-1.73)
30 12de680 105518 130 1 qlc (SunFC Qlogic FCA v20071114-2.25)
luxadm probe
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node WWN:20000004cf22dccd Device Type
isk device
Logical Path:/dev/rdsk/c1t1d0s2
Node WWN:20000004cf991719 Device Typeisk device
Logical Path:/dev/rdsk/c1t2d0s2
luxadm qlgc
Found Path to 1 FC100/P, ISP2200, ISP23xx Devices
luxadm -e port
/devices/pci@8,600000/SUNW,qlc@4/fp@0,0:devctl CONNECTED
Opening Device: /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:devctl
Detected FCode Version: ISP2200 FC-AL Host Adapter Driver: 1.15 04/03/22
Complete
26 1289698 25070 118 1 ssd (SCSI SSA/FCAL Disk Driver 1.513)
27 12a69f8 192a0 103 1 fcp (SunFC FCP v20070529-1.123)
28 12bef08 8c00 - 1 fctl (SunFC Transport v20070529-1.57)
29 12c6218 18bb8 99 1 fp (SunFC Port v20070116-1.73)
30 12de680 105518 130 1 qlc (SunFC Qlogic FCA v20071114-2.25)
luxadm probe
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node WWN:20000004cf22dccd Device Type
isk deviceLogical Path:/dev/rdsk/c1t1d0s2
Node WWN:20000004cf991719 Device Type
isk deviceLogical Path:/dev/rdsk/c1t2d0s2
luxadm qlgc
Found Path to 1 FC100/P, ISP2200, ISP23xx Devices
luxadm -e port
/devices/pci@8,600000/SUNW,qlc@4/fp@0,0:devctl CONNECTED
Opening Device: /devices/pci@8,600000/SUNW,qlc@4/fp@0,0:devctl
Detected FCode Version: ISP2200 FC-AL Host Adapter Driver: 1.15 04/03/22
Complete
Last edited by tribbles; 08-31-2008 at 06:50 PM..
|
|
8 More Discussions You Might Find Interesting
1. UNIX Benchmarks
Sun Blade 2000 UltraSparc III Solaris 8
Notes:
prtdiag:
System Configuration: Sun Microsystems sun4u SUNW,Sun-Blade-1000 (UltraSPARC-III+)
System clock frequency: 150 MHZ
Memory size: 3GB
==================================== CPUs ====================================
... (0 Replies)
Discussion started by: tnorth
0 Replies
2. Solaris
We had to replace a hard drive in one of our Sun Blade 150s, but now it hangs during the Jumpstart. It will show 1 or 2 Timeout for ARP/RARP messages and then start the spinning numbers. It always stops at 2ae00 and just hangs there.
We have 1 combined jumpstart server and it is also our NIS+... (5 Replies)
Discussion started by: stottsja
5 Replies
3. Solaris
HW: SunBlade 1000 w/2x CPUs, DVD-ROM, XVR-1200
SW: Solaris 10 DVDs direct from Sun
Tried: probing scsi, boot -r, reset-all
When booting off cd: boot cdrom
Boot device: /pci@8, 700000/scsi/scsi@6/disk@6,0:f File and args:
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright... (8 Replies)
Discussion started by: boolean2
8 Replies
4. Solaris
Hi,
I have a Solaris 8.0 BLADE 150 machine. I have an onboard graphics alongwith an addon XVR500 graphics card. Now, when I use the motherboard graphics, I am not able to login to the XWINDOWS terminal, instead it stays on the console.
But, if I insert the monitor cable to the XVR500 port,... (2 Replies)
Discussion started by: angshuman_ag
2 Replies
5. Hardware
Hello,
I have a sun blade 1000 machine, it passes post, has 2 750mhz sparc 3 cpus and has 4GB of ram.
I have setup a TIP connection and did everything i could to figure what the hell is going on, but I cannot it seems to me that the usb ports are not giving out any power.
I've tried all... (0 Replies)
Discussion started by: binary0x01
0 Replies
6. UNIX for Dummies Questions & Answers
For the past ten years I have owned a blade 100, and I had Solaris 9 running on it.
Due to the fact, 9 is woefully out of date, I wanted to try 10, but 10 needed more ram, so I beefed up the ram to the full 2 gig. I have two 15 gig ide drives in the box (stock drives). But unfortunately solaris... (2 Replies)
Discussion started by: RichardET
2 Replies
7. Solaris
Hi everyone
can someone please explain to me how to install solaris 10 on a sunblade 1500 using cdrom?
Thanks for your assistance (1 Reply)
Discussion started by: cjashu
1 Replies
8. Solaris
Hi everybody,
I'm having big troubles in installing Solaris 8 on a Sun Blade 150.
Here are some system specs:
Sun Blade 150 (UltraSPARC-IIe 550MHz)
RAM: 256MB
OBP 4.10.6 2003/06/06 12:30
POST 2.0.1 2001/08/23 17:13
When I try to boot from Solaris 8 CD with boot cdrom or... (10 Replies)
Discussion started by: Vortigern
10 Replies
LEARN ABOUT V7
qlc
qlc(7D) qlc(7D) NAME
qlc - ISP2200, ISP2300, and SP212 Family Fibre Channel host bus adapter driver. SYNOPSIS
SUNW,qlc The qlc host bus adapter driver is a Sun Fibre Channel transport layer-compliant nexus driver for the Qlogic ISP2200, ISP2200A, ISP2310, ISP2312, and SP212 adapters. These adapters support Fibre Channel SCSI and IP Protocols, FC-AL public loop profile, point-to-point fab- ric connection and Fibre Channel service classes two and three (see NOTES section below). The qlc driver interfaces with the Sun Fibre Channel transport layer to support the standard functions provided by the SCSA interface. It supports auto request sense and tagged queueing by default. The driver requires that all devices have unique hard addresses in private loop configurations. Devices with conflicting hard addresses are not accessible. /kernel/drv/qlc 32-bit ELF kernel module () /kernel/drv/amd64/qlc 64-bit ELF kernel module () /kernel/drv/sparcv9/qlc 64-bit ELF kernel module (SPARC) /kernel/drv/qlc.conf Driver configuration file See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |SPARC, | +-----------------------------+-----------------------------+ |Availability |SUNWqlc | +-----------------------------+-----------------------------+ prtconf(1M), driver.conf(4), fcp(7D), fp(7D) Writing Device Drivers ANSI X3.230:1994, Fibre Channel Physical Signaling (FC-PH) Project 1134-D, Fibre Channel Generic Services (FC-GS-2) ANSI X3.269-1996, Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.270-1996, Fibre Channel Protocol for SCSI (FCP-SCSI) ANSI X3.270-1996, SCSI-3 Architecture Model (SAM) Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) Fabric Loop Attachment (FC-FLA) ISP2200 Firmware Interface Specification, QLogic Corporation ISP2300 Series Firmware Specification, QLogic Corporation NOTES
SP-212-based host bus adapters (including QLA-210) are supported on x86 platforms only and are limited to a maximum of 8 targets in fab- ric and sixteen targets in local loop topology. FL topology is not supported with the SP-212-based host bus adapter. 21 Feb 20054 qlc(7D)