Sponsored Content
Operating Systems Solaris A1000 Solaris 10 on Blade 1000 Post 302230603 by incredible on Saturday 30th of August 2008 07:45:02 AM
Old 08-30-2008
You should do a reset-all from the OBP before you power off. Once the system return to ok prompt , verify the param again by using printenv and then use the power-off command. on again and try
 

8 More Discussions You Might Find Interesting

1. UNIX Benchmarks

Sun Blade 2000 UltraSparc III Solaris 8

Sun Blade 2000 UltraSparc III Solaris 8 Notes: prtdiag: System Configuration: Sun Microsystems sun4u SUNW,Sun-Blade-1000 (UltraSPARC-III+) System clock frequency: 150 MHZ Memory size: 3GB ==================================== CPUs ==================================== ... (0 Replies)
Discussion started by: tnorth
0 Replies

2. Solaris

Jumpstart Solaris 8 on Sun Blade 150 Hangs

We had to replace a hard drive in one of our Sun Blade 150s, but now it hangs during the Jumpstart. It will show 1 or 2 Timeout for ARP/RARP messages and then start the spinning numbers. It always stops at 2ae00 and just hangs there. We have 1 combined jumpstart server and it is also our NIS+... (5 Replies)
Discussion started by: stottsja
5 Replies

3. Solaris

SunBlade 1000, 'blocked' when trying to install Solaris 10

HW: SunBlade 1000 w/2x CPUs, DVD-ROM, XVR-1200 SW: Solaris 10 DVDs direct from Sun Tried: probing scsi, boot -r, reset-all When booting off cd: boot cdrom Boot device: /pci@8, 700000/scsi/scsi@6/disk@6,0:f File and args: SunOS Release 5.10 Version Generic_141444-09 64-bit Copyright... (8 Replies)
Discussion started by: boolean2
8 Replies

4. Solaris

Solaris: Blade 150 - XWINDOWS Problem

Hi, I have a Solaris 8.0 BLADE 150 machine. I have an onboard graphics alongwith an addon XVR500 graphics card. Now, when I use the motherboard graphics, I am not able to login to the XWINDOWS terminal, instead it stays on the console. But, if I insert the monitor cable to the XVR500 port,... (2 Replies)
Discussion started by: angshuman_ag
2 Replies

5. Hardware

Sun Blade 1000 keyboard not detected.

Hello, I have a sun blade 1000 machine, it passes post, has 2 750mhz sparc 3 cpus and has 4GB of ram. I have setup a TIP connection and did everything i could to figure what the hell is going on, but I cannot it seems to me that the usb ports are not giving out any power. I've tried all... (0 Replies)
Discussion started by: binary0x01
0 Replies

6. UNIX for Dummies Questions & Answers

Reinstalling Solaris 9 on Sun Blade 100

For the past ten years I have owned a blade 100, and I had Solaris 9 running on it. Due to the fact, 9 is woefully out of date, I wanted to try 10, but 10 needed more ram, so I beefed up the ram to the full 2 gig. I have two 15 gig ide drives in the box (stock drives). But unfortunately solaris... (2 Replies)
Discussion started by: RichardET
2 Replies

7. Solaris

help installing solaris 10 on sun blade 1500

Hi everyone can someone please explain to me how to install solaris 10 on a sunblade 1500 using cdrom? Thanks for your assistance (1 Reply)
Discussion started by: cjashu
1 Replies

8. Solaris

Cannot install or run Solaris 8 on Sun Blade 150

Hi everybody, I'm having big troubles in installing Solaris 8 on a Sun Blade 150. Here are some system specs: Sun Blade 150 (UltraSPARC-IIe 550MHz) RAM: 256MB OBP 4.10.6 2003/06/06 12:30 POST 2.0.1 2001/08/23 17:13 When I try to boot from Solaris 8 CD with boot cdrom or... (10 Replies)
Discussion started by: Vortigern
10 Replies
GNOME-POWER-MANAGER(1)													    GNOME-POWER-MANAGER(1)

NAME
gnome-power-manager - gnome power manager userspace daemon SYNOPSIS
gnome-power-manager [ --verbose ] [ --debug ] [ --help ] DESCRIPTION
This manual page documents briefly the gnome-power-manager command. gnome-power-manager is the backend program of the GNOME power management infrastructure providing a complete and integrated solution to power management under the GNOME desktop environment. It supports features such as suspending, hibernating, screen blanking, cpu frequency switching and more in one small neat package. OPTIONS
This program follows the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below. --help Show summary of options. --verbose Show extra debugging. --no-daemon Do not detach gnome-power-manager into the background so that error messages will be displayed on console. --debug Only show specific debugging options. Useful for developers only. SEE ALSO
gnome-power-preferences (1). The programs are documented fully on http://gnome.org/projects/gnome-power-manager/ . AUTHOR
This manual page was written by Oliver Grawert <ogra@ubuntu.com> for the Debian system and updated by Ow Mun Heng <nikeow@yahoo.com> 05 July 2010 GNOME-POWER-MANAGER(1)
All times are GMT -4. The time now is 01:04 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy