08-28-2008
Here are the errors:
forceload of drv/rdnexus failed
forceload of drv/rdriver failed
Aug 28 16:37:16 tava scsi: [ID 365881 kern.info] /pci@8,700000/scsi@6 (glm0):
Aug 28 16:37:16 tava glm0 supports power management.
Aug 28 16:37:16 tava scsi: [ID 365881 kern.info] /pci@8,700000/scsi@6 (glm0):
Aug 28 16:37:16 tava Rev. 7 Symbios 53c876 found.
Aug 28 16:37:16 tava pcisch: [ID 370704 kern.info] PCI-device: scsi@6, glm0
Aug 28 16:37:16 tava genunix: [ID 936769 kern.info] glm0 is /pci@8,700000/scsi@6
Aug 28 16:37:16 tava scsi: [ID 365881 kern.info] /pci@8,700000/scsi@6,1 (glm1):
Aug 28 16:37:16 tava glm1 supports power management.
Aug 28 16:37:16 tava scsi: [ID 365881 kern.info] /pci@8,700000/scsi@6,1 (glm1):
Aug 28 16:37:16 tava Rev. 7 Symbios 53c876 found.
Aug 28 16:37:16 tava pcisch: [ID 370704 kern.info] PCI-device: scsi@6,1, glm1
Aug 28 16:37:16 tava genunix: [ID 936769 kern.info] glm1 is /pci@8,700000/scsi@6,1
Aug 28 16:37:16 tava scsi: [ID 365881 kern.info] /pci@8,600000/scsi@1 (glm4):
Aug 28 16:37:16 tava Rev. 5 Symbios 53c876 found.
Aug 28 16:37:16 tava pcisch: [ID 370704 kern.info] PCI-device: scsi@1, glm4
Aug 28 16:37:16 tava genunix: [ID 936769 kern.info] glm4 is /pci@8,600000/scsi@1
Aug 28 16:37:16 tava scsi: [ID 365881 kern.info] /pci@8,600000/scsi@1,1 (glm5):
Aug 28 16:37:16 tava Rev. 5 Symbios 53c876 found.
Aug 28 16:37:16 tava pcisch: [ID 370704 kern.info] PCI-device: scsi@1,1, glm5
Aug 28 16:37:16 tava genunix: [ID 936769 kern.info] glm5 is /pci@8,600000/scsi@1,1
Aug 28 16:37:18 tava scsi: [ID 193665 kern.info] sd6 at glm0: target 6 lun 0
Aug 28 16:37:18 tava genunix: [ID 936769 kern.info] sd6 is /pci@8,700000/scsi@6/sd@6,0
Aug 28 16:37:19 tava scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/scsi@1 (glm4):
Aug 28 16:37:19 tava glm invalid interrupt while disconnected
Aug 28 16:37:19 tava genunix: [ID 408822 kern.info] NOTICE: glm4: fault detected in device; service still available
Aug 28 16:37:19 tava genunix: [ID 611667 kern.info] NOTICE: glm4: glm invalid interrupt while disconnected
The raid manager is RM6 from SUN
I installed the latest patch cluster but no specific kernel patch after that
tava root /414 iostat -xE
extended device statistics
device r/s w/s kr/s kw/s wait actv svc_t %w %b
fd0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
sd6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
sd23 0.1 0.0 0.0 0.0 0.0 0.0 0.0 0 0
ssd0 0.0 0.0 0.1 0.0 0.0 0.0 2.8 0 0
ssd1 4.3 1.5 59.7 7.5 0.0 0.1 14.1 0 3
sd6 Soft Errors: 12 Hard Errors: 0 Transport Errors: 0
Vendor: TOSHIBA Product: XM6201TASUN32XCD Revision: 1103 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 12 Predictive Failure Analysis: 0
sd23 Soft Errors: 3 Hard Errors: 1 Transport Errors: 6
Vendor: Symbios Product: StorEDGE A1000 Revision: 0205 Serial No:
Size: 0.00GB <999424 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 1 Recoverable: 0
Illegal Request: 3 Predictive Failure Analysis: 0
ssd0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST336605FSUN36G Revision: A438 Serial No: 0219P1N13A
Size: 36.42GB <36418595328 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
ssd1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST336605FSUN36G Revision: 0438 Serial No: 0137P0JQ35
Size: 36.42GB <36418595328 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
Last edited by tribbles; 08-28-2008 at 07:41 PM..
8 More Discussions You Might Find Interesting
1. UNIX Benchmarks
Sun Blade 2000 UltraSparc III Solaris 8
Notes:
prtdiag:
System Configuration: Sun Microsystems sun4u SUNW,Sun-Blade-1000 (UltraSPARC-III+)
System clock frequency: 150 MHZ
Memory size: 3GB
==================================== CPUs ====================================
... (0 Replies)
Discussion started by: tnorth
0 Replies
2. Solaris
We had to replace a hard drive in one of our Sun Blade 150s, but now it hangs during the Jumpstart. It will show 1 or 2 Timeout for ARP/RARP messages and then start the spinning numbers. It always stops at 2ae00 and just hangs there.
We have 1 combined jumpstart server and it is also our NIS+... (5 Replies)
Discussion started by: stottsja
5 Replies
3. Solaris
HW: SunBlade 1000 w/2x CPUs, DVD-ROM, XVR-1200
SW: Solaris 10 DVDs direct from Sun
Tried: probing scsi, boot -r, reset-all
When booting off cd: boot cdrom
Boot device: /pci@8, 700000/scsi/scsi@6/disk@6,0:f File and args:
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright... (8 Replies)
Discussion started by: boolean2
8 Replies
4. Solaris
Hi,
I have a Solaris 8.0 BLADE 150 machine. I have an onboard graphics alongwith an addon XVR500 graphics card. Now, when I use the motherboard graphics, I am not able to login to the XWINDOWS terminal, instead it stays on the console.
But, if I insert the monitor cable to the XVR500 port,... (2 Replies)
Discussion started by: angshuman_ag
2 Replies
5. Hardware
Hello,
I have a sun blade 1000 machine, it passes post, has 2 750mhz sparc 3 cpus and has 4GB of ram.
I have setup a TIP connection and did everything i could to figure what the hell is going on, but I cannot it seems to me that the usb ports are not giving out any power.
I've tried all... (0 Replies)
Discussion started by: binary0x01
0 Replies
6. UNIX for Dummies Questions & Answers
For the past ten years I have owned a blade 100, and I had Solaris 9 running on it.
Due to the fact, 9 is woefully out of date, I wanted to try 10, but 10 needed more ram, so I beefed up the ram to the full 2 gig. I have two 15 gig ide drives in the box (stock drives). But unfortunately solaris... (2 Replies)
Discussion started by: RichardET
2 Replies
7. Solaris
Hi everyone
can someone please explain to me how to install solaris 10 on a sunblade 1500 using cdrom?
Thanks for your assistance (1 Reply)
Discussion started by: cjashu
1 Replies
8. Solaris
Hi everybody,
I'm having big troubles in installing Solaris 8 on a Sun Blade 150.
Here are some system specs:
Sun Blade 150 (UltraSPARC-IIe 550MHz)
RAM: 256MB
OBP 4.10.6 2003/06/06 12:30
POST 2.0.1 2001/08/23 17:13
When I try to boot from Solaris 8 CD with boot cdrom or... (10 Replies)
Discussion started by: Vortigern
10 Replies