To find switch port of machine running under VMware Post: 302226272

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

how to find out if a port is available on a remote machine?

hi, I can ping into another unix machine, but I cannot seem to access a certain application. I think it might be because I am now allowed to connect to the port (because of firewall configuration). How can I find out if I have access to a port on another machine? thanks

2. UNIX for Advanced & Expert Users

check remote switch port speed setting

Hi, Someone told me how to check the remote switch port's speed setting on the other end of the cable, from linux. I forgot it. Anyone knows? I checked dmesg, ethtool (haven't checked this out thoroughly) , no luck. thanks, Marc

3. AIX

Switch Port Becoming Private & restricting access

Hello folks, I have an AIX server that is connected to a storage array via a Brocade switch using 4 ports from either side. The zoning is done such that there are 4 paths visible from the server to the storage. My work involves frequent disabling or enabling the switch ports that are...

4. UNIX for Advanced & Expert Users

How to Switch off a Unix machine abruptly

Hi Folks, My UNIX machine is placed geographically in another location. I have a remote access towards it. I want to abruptly switch off my unix machine through remote connection. Is it possible through any UNIX commands? I practically want to power off a PC , something like unplugging a power...

5. Virtualization and Cloud Computing

solaris virtual machine vmware esx

Hi All How would you send a solaris virtual machine in vmware esx, a break signal? :confused:

6. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

7. Linux

Connect from USB to serial port of switch

I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID...

8. UNIX for Beginners Questions & Answers

How to check everything are migrated after the physical to vmware virtual machine?

I have a physical machine , just use vmware tools migrated data to virtual machine . how can I check these two servers - old and new server , the data are the same , all files are copy to new server ? thanks

9. UNIX for Beginners Questions & Answers

How to find whether Solaris installed on physical machine or on a VMware/KVM?

Hi All, . I am trying to find whether Solaris 11 installed on physical server or on VMware/KVM. I tried uname -a but it's giving only whether i installed on X86 or sparc machine. I tried prtdiag command but it's giving below information. command : prtdiag -v |grep "System...

LEARN ABOUT DEBIAN

vmci

VMCI(9) 							   Open VM Tools							   VMCI(9)

NAME

       vmci - vmware kernel module

SYNOPSIS

       modprobe vmci

DESCRIPTION

       This  is a Linux kernel device driver module that drives VMware's inter-VM communication device. The device itself is backed by a PCI-based
       virtual hardware implementation, so hotplug or udev should load it at guest boot time in any VMs using hardware version 7.

OPTIONS

       vmci has no options.

SEE ALSO

       vmware-checkvm(1)
       vmware-hgfsclient(1)
       vmware-toolbox(1)
       vmware-toolbox-cmd(1)
       vmware-user(1)
       vmware-xferlogs(1)
       libguestlib(3)
       libvmtools(3)
       vmware-guestd(8)
       vmware-hgfsmounter(8)
       vmware-user-suid-wrapper(8)
       vmblock(9)
       vmhgfs(9)
       vmmemctl(9)
       vmsock(9)
       vmsync(9)
       vmxnet(9)
       vmxnet3(9)

HOMEPAGE

       More information about vmci and the Open VM Tools can be found at <http://open-vm-tools.sourceforge.net/>.

AUTHOR

       Open VM Tools were written by VMware, Inc. <http://www.vmware.com/>.

       This manual page was put together from homepage materials by Daniel  Baumann  <daniel.baumann@progress-technologies.net>,  for  the  Debian
       project (but may be used by others).

2010.03.20-243334						    2010-04-08								   VMCI(9)