problem with clearing a removed LUN from solaris Post: 302222189

8 More Discussions You Might Find Interesting

1. Solaris

Solaris 9 or 10 LUN Limitations

Is there a limit to the number of LUNS that can be concatenated using Solaris Volume manager with Soft partitions? I have worked with some AIX admins in the past and there was such a limitation therefore limiting the size the filesystem could grow to. Is there such a limitation in Solaris 9...

2. High Performance Computing

Removed crashed node from Solaris Cluster 3.0

All- I am new to these forums so please excuse me if this post is in the wrong place. I had a node crash in a 4 node cluster and mgmt has determined this node will not be part of the cluster when rebuilt. I am researching how to remove it from the cluster information on the other 3 nodes and...

3. Solaris

LUN allocation in solaris server

hi all can anyone tell me how to track a new attached LUN in a solaris server??

4. Solaris

Largest LUN size in Solaris 10

What is the largest possible LUN size that can be presented to Solaris 10. I've been googling a lot about this. The new EFI lablels (an alternative to VTOC) supports LUNs greater than 2TB. I need to know the upper limit. please help me find it.

5. Solaris

Printer can't be removed under Solaris 10

Dear all, we are running a Solaris 10 8/08 Sparc system called 'test-s' where #lpstat -t shows such a line: system for mps2_p: printer-s (as lpd://printer-s/printers/mps2_p#Solaris) How can we get rid of this entry because #lpstat -x mps2_p says 'unknown printer'. THX for any...

6. Solaris

new attached lun in solaris 10

hi, what are the steps to detect and configure a new attached lun in Solaris 10. Is there any difference between cfgadm and luxadm command ? rgds, snjksh

7. Solaris

Problem with Solaris LUN and New FS

Hi All, I'm using Solaris server, SunOS 5.10 Generic_144488-08 sun4u sparc SUNW, SPARC-Enterprise. There is a newly created LUN of 250GB (EMC). I've scanned the system and able to see the new LUN. For example: 103. emcpower19a <DGC-VRAID-0430 cyl 48638 alt 2 hd 256 sec 16>...

8. Solaris

How to get LUN WWN in Solaris?

How to get LUN WWN (i.e LUN mapped from a storage box say Symmetrix or clariion) in Solaris. fcinfo command does give the Target port wwn but what i'm looking for is the LUN WWN. Any help is appreciated.

LEARN ABOUT CENTOS

halt

HALT(8) 							       halt								   HALT(8)

NAME

       halt, poweroff, reboot - Halt, power-off or reboot the machine

SYNOPSIS

       halt [OPTIONS...]

       poweroff [OPTIONS...]

       reboot [OPTIONS...]

DESCRIPTION

       halt, poweroff, reboot may be used to halt, power-off or reboot the machine.

OPTIONS

       The following options are understood:

       --help
	   Prints a short help text and exits.

       --halt
	   Halt the machine, regardless of which one of the three commands is invoked.

       -p, --poweroff
	   Power-off the machine, regardless of which one of the three commands is invoked.

       --reboot
	   Reboot the machine, regardless of which one of the three commands is invoked.

       -f, --force
	   Force immediate halt, power-off, reboot. Do not contact the init system.

       -w, --wtmp-only
	   Only write wtmp shutdown entry, do not actually halt, power-off, reboot.

       -d, --no-wtmp
	   Do not write wtmp shutdown entry.

       --no-wall
	   Do not send wall message before halt, power-off, reboot.

EXIT STATUS

       On success, 0 is returned, a non-zero failure code otherwise.

NOTES

       These are legacy commands available for compatibility only.

SEE ALSO

       systemd(1), systemctl(1), shutdown(8), wall(1)

systemd 208																   HALT(8)