07-29-2008
You got transport error.
I'd power down the server. Re-seat all the disks make sure they are securely connected to the server.
/dev/rdsk/c1t1d0s7 disks probably contains the application home, it was complaining during bootup. check your vfstab file under /etc
cat /etc/vfstab | grep c1t1d0s7
or
cat /etc/vfstab |grep <application home directory> to see where it's mounted or what is mounted to c1t1d0s7
if you are lucky maybe errors in vfstab, otherwise disk crash means restore from backup tape.
Also I'm guessing here that you could be using disks with different RPM speeds hence
"Target 9 reducing sync, transfer rate" the faster disk will always spin down to the RPM speed of the slowest disk.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi ,
My Sun Machine Rebooted by itself 2 days back . Its running fine now , But i wanted to find out wat caused it to reboot...
This is wat the var/adm/messages show .
Kern.notice:- System booting after fatal error FATAL...
Wat causes this message ...
And wat tasks should i do to ensure it... (6 Replies)
Discussion started by: DPAI
6 Replies
2. Solaris
Hello,
I want to change the IP of my SUN solaris machine but i am not bale to find the right way. I tried the following steps:
1) edit /etc/inet/hosts and change IP address for host listed in
/etc/hostname.le0
2) ifconfig le0 down
3) ifconfig le0 inet NEW_IP_ADDR netmask + broadcast + ... (5 Replies)
Discussion started by: er_aparna
5 Replies
3. Solaris
Hi I am trying to bring up our Sun V100 machine remotely using hyper terminal. We have connected LOM port A to COM1 of our windows server and have lom promt available.
Now when we type poweron it starts booting and goes through the booting process and stops at the following step...
....
... (7 Replies)
Discussion started by: chimpu
7 Replies
4. Solaris
I had one sun ultra enterprise1 cpu.
it's not giving any disply,which operating system it's support.
How can install os on this CPU. (2 Replies)
Discussion started by: jagadeesh
2 Replies
5. Solaris
Hi Experts,
I am new for solaris, i am using Solaris10,can you anyone assist me how to configure IP in my machine.
Thanks (4 Replies)
Discussion started by: daya.pandit
4 Replies
6. Solaris
Dear Friends,
Sun Fire E2900 crashed. I collected explorer output. core dump files been generated.
There some interesting output files related to crash dumps, that I need some help from you guys to understand.
The file in the explorer output is under /sysconfig/crash it's called:... (5 Replies)
Discussion started by: Sun Fire
5 Replies
7. Solaris
My one Sun machine is not able to ssh another machine of Sun. Although I have configured the ssh successfully
( SunOS sunbox2 5.9 Generic_118558-34 sun4u sparc SUNW,Sun-Blade-2500 )
ERROR
bash-2.05# ssh sunbox2
/etc/ssh/ssh_config: line 34: Bad configuration option: PermitRootLogin... (0 Replies)
Discussion started by: z_haseeb
0 Replies
8. Solaris
Hi all.
Last year, after registering on Sun support site, I downloaded for free all available documentation (in PDF) and support files of a couple of old Sun workstations (Ultra 5 and Ultra 10).
Now I need the documentation and support files of other old Sun workstations (SPARCstation 20 and... (4 Replies)
Discussion started by: wisechip
4 Replies
9. UNIX for Beginners Questions & Answers
Dear all,
I have Sun Oracle 10 SPARC T4-1 machine with 4 units SAS2 300GB configure with 2 set Raid1.
Is it possible to take out all 4 hd and cloned the 4 HD using disk clone/replicator machine with same HD size and model?
After the cloned completed put back the new cloned HD at original... (4 Replies)
Discussion started by: ayyahma
4 Replies
10. UNIX for Beginners Questions & Answers
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
]-> show HOST
/HOST
Targets:
bootmode
diag
domain
Properties:
autorestart = reset
autorunonerror = false
bootfailrecovery = poweroff
... (29 Replies)
Discussion started by: z_haseeb
29 Replies
cmdk(7D) Devices cmdk(7D)
NAME
cmdk - common disk driver
SYNOPSIS
cmdk@target, lun : [ partition | slice ]
DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable
disks.
The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk
records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin-
gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit-
ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk.
I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL
error.
Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the
entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area.
Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program.
FILES
/dev/dsk/cndn[s|p]n block device (IDE)
/dev/rdsk/cndn[s|p]n raw device (IDE)
where:
cn controller n
dn lun n (0-7)
sn UNIX system slice n (0-15)
pn fdisk partition(0)
/kernel/drv/cmdk 32-bit kernel module.
/kernel/drv/amd64/cmdk 64-bit kernel module.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I)
SunOS 5.10 9 Oct 2004 cmdk(7D)