How to look for open pci slots Post: 302218625

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

tape driver slots confgure

Hi Does anyone know the command to configure HP tape slots. I have tried the following on Sun, but its notworking. This is the first time I have configured a tape drive with muiltple slots. root@ssdb0009 # cfgadm -l Ap_Id Type Receptacle Occupant Conditio...

2. Filesystems, Disks and Memory

Probing memory slots

Hello, I'm running Red Hat Linux on a Dell Poweredge 2650 Rack Server and wondered if anyone knew of a tool or command I could use to probe the memory slots on the motherboard. I know the machine has six memory slots and currently contains 1GB RAM, what I don't know however, is if it contains...

3. Solaris

Moving HBA cards to different PCI slots

Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with...

4. Solaris

Help! Moving HBA cards to different slots

Due to speed mismatch, the server kept crashing. Sun suggests that I need to move the two HBA cards from the 66Mhz to the 33Mhz slots. There are tons of disks that are connected to these HBAs and I have Veritas volume manager. Does anyone have a list of what I need to do prior/after moving to...

5. Solaris

JNI 1560 in different speed PCI slots

I've got lots of scsi transport errors on the E2900 - the HBA was replaced once out of curiosity but the problem still exists. Feb 15 07:03:11 ivsdbch2 scsi: WARNING: /ssm@0,0/pci@18 ,600000/SUNW,jfca@1,1/fp@0,0/ssd@w5005076300c889cb,4 (ssd21): Feb 15 07:03:11 ivsdbch2 SCSI transport...

6. Solaris

Memory Slots

Hi All, Can Any body tell me how to find out the how many memory slots are there in SUN server ?? Thanks and Regards,

7. AIX

Command that shows mem slots

A while back I had a command that shows the memory slots (and info on the modules inserter) in an IBM AIX machine. I cannot remember it at this time, can someone help me out with this command please?

8. AIX

Memory - Which slots and how much?

Hi, all. I was wondering if there's a command or log file that will tell me how much RAM is in the system and, more specifically, the size of each stick. Thanks, Jason

9. Solaris

available PCI slots on v440

How do I find any available PCI slots on a v440? When I run prtconf, I get the following output? But I am not able to make out whether all the PCI slots are used. ================================= IO Devices ================================= Bus Freq Brd Type MHz Slot ...

10. Solaris

Can't reinstall Solaris 11.3 - no more disk slots available

I tried to reinstall GRUB2 on my previous Solaris 11.3 installation but could not figure out why "bootadm install-bootloader" failed. Now I am trying to reinstall Solaris 11.3 instead, over my old Solaris partition. I am using the USB Live media ISO with the GUI. Installation fails with this...

LEARN ABOUT DEBIAN

gems-server

GEMS-SERVER(1)							gems documentation						    GEMS-SERVER(1)

NAME

       gems-server - Transmit a shell session in real time.

SYNOPSIS

       gems-server [-ip ip] [-port p] [-maxconn n] [-wait m] [-log dest] [-noscript] [-script_bin script]

       gems-server -h | -v

DESCRIPTION

       Transmits a shell session to be shown in real time in various different computers or terminals.

       gems-server  transmits data in real time to clients via a network connection. Each one of these clients must run the gems-client(1) program
       to establish connection and receive the transmitted data. Clients can connect and disconnect at any given time, but  of	course	they  will
       only receive the data that is transmitted while they are connected (just like a radio transmission/reception system).

       The  gems  system is normally used to transmit a console session and show it in various computers at the same time, but it is also possible
       to transmit any other kind of data.

OPTIONS

       -ip    IP address where connections will be accepted.

       -port  TCP port. Default: 6666.

       -maxconn
	      Do not accept more than n simultaneous clients. Default: 25.

       -wait  Wait until m clients are connected before starting the transmission. This is useful to ensure that the first m clients will  receive
	      all data transmitted. The default behavior is to start transmission immediately, without waiting for client connections.

       -log   By  default,  the server does not write log messages. This option configures the destination of logs. The dest argument can be `sys-
	      log' (to log through syslogd(8)), `stderr' (to log through standard error output), or it can be an arbitrary filename (log  messages
	      will be appended to the file, if it exists).

       -noscript
	      By  default,  the  server  executes the script(1) program to take terminal data and transmit it. When this option is used the server
	      will not run script, and data will be read form standard input.

       -script_bin
	      Specifies the location of the script(1).	program. Default: /usr/bin/script.

       -h     Show a short help message.

       -v     Show version information.

FILES

       /var/lock/gems-server.PORT
	      Lock file.  gems-server creates this file on initialization and deletes it on exit. PORT is replaced by the TCP  port  used.   gems-
	      server will not run if this file is already present in the system.

AUTHORS

       Diego Essaya <dessaya@fi.uba.ar>

       Emiliano Castagnari <ecastag@fi.uba.ar>

SEE ALSO

       gems-client(1), script(1), syslogd(8)

gems								    AUGUST 2004 						    GEMS-SERVER(1)