Machine is booting to maintenance mode. Post: 302218217

Sponsored Content

Operating Systems Solaris Machine is booting to maintenance mode. Post 302218217 by cheetobandito on Thursday 24th of July 2008 04:07:54 PM

07-24-2008

Registered User

No, that's there. Here's what it looks like:

Code:

# cat netconfig
#pragma ident   "@(#)netconfig  1.16    99/10/25 SMI"
#
# The "Network Configuration" File.
#
# Each entry is of the form:
#
#       <network_id> <semantics> <flags> <protofamily> <protoname> \
#               <device> <nametoaddr_libs>
#
# The "-" in <nametoaddr_libs> for inet family transports indicates
# redirection to the name service switch policies for "hosts" and
# "services". The "-" may be replaced by nametoaddr libraries that
# comply with the SVr4 specs, in which case the name service switch
# will not be used for netdir_getbyname, netdir_getbyaddr,
# gethostbyname, gethostbyaddr, getservbyname, and getservbyport.
# There are no nametoaddr_libs for the inet family in Solaris anymore.
#
udp6       tpi_clts      v     inet6   udp    /dev/udp6       -
tcp6       tpi_cots_ord  v     inet6   tcp    /dev/tcp6       -
udp        tpi_clts      v     inet    udp    /dev/udp        -
tcp        tpi_cots_ord  v     inet    tcp    /dev/tcp        -
rawip      tpi_raw       -     inet    -      /dev/rawip      -
ticlts     tpi_clts      v    loopback -      /dev/ticlts     straddr.so
ticotsord  tpi_cots_ord  v    loopback -      /dev/ticotsord  straddr.so
ticots     tpi_cots      v    loopback -      /dev/ticots     straddr.so
#

Thanks for helping.

cheetobandito

View Public Profile for cheetobandito

Find all posts by cheetobandito

10 More Discussions You Might Find Interesting

1. HP-UX

Maintenance mode boot(MMB) and recovery

hi, i figured why i need to boot in MMB,some of which are missing or corrupt LABEL (LIF labeL ,i guess) on the boot disk. To explicitly corrupt this entry i think a simple dd will work. ok let me elaborate this issue: i need to check this functionality. so i have one LVM boot disk and one...

2. Solaris

FTP is in maintenance mode always

Hello All, On solaris 10 server i could see the FTP service is in maintenance mode always :mad: Could some assist? svcs -xv svc:/network/nfs/nlockmgr:default (NFS lock manager) State: maintenance since Tue 28 Jul 2009 11:47:55 AM BST Reason: Restarting too quickly. See: Sun...

3. Solaris

Process in maintenance mode, why?

Hi, I have installed Hudson on a Solaris 11 server, using the installation instructions available at Paul Oswald: Hudson Solaris SMF Manifest. When I perform svcs -l hudson, I get: fmri svc:/application/hudson:default name Hudson Continuous Build Server enabled true...

4. Solaris

Samba service in maintenance mode ???

I have a Solaris 10 SunFire v880 machine and I'm having trouble with Samba. Samba has worked on this machine but since the machine has been re-booted Samba has not worked. Machine details are: cat /etc/release Solaris 10 10/08 s10s_u6wos_07b SPARC Copyright 2008...

5. Solaris

Helpme !! ssh service in maintenance mode

Hi Guys, Virtual Machine - Solaris 10 ssh service is in maintenance mode, when i tried to disable it it got disabled but when i enabling it ( svcadm enable ssh) it is coming in maintenance mode...... Pls help

6. Solaris

System booting to maintenance mode

Hi Guys, I have a sunblade 1500. I booted the system and it booted to maintenance mode. How can I fix this? Thanks lots

7. Solaris

DNS service is in maintenance mode. How to bring it back to online mode?

:confused: when i tried to look the status of DNS-client, it is in maintenance mode..... Please tell me how to bring it back to online mode...PLEASE TELL ME STEP BY STEP.... PLEASE... :wall:

8. Solaris

/network/smb/server goes into maintenance mode.

All I'm running an OpenSolaris system (Nexenta). When doing a svcs I see that/network/smb/server is in maintenance mode. I have run a clear on the service and restarted. I see the same service show online* for a bit but then, enters maintenance every time. In the service log I...

9. AIX

How to put VIOS in Maintenance mode?

Hi this may be a easy question to answer but thanks in advance. So I was able to download the VIOS media from IBM and currently I am burning it to a cd/dvd right now. The steps I've collected so far are from the net. can you please confirm and add on to the steps if there are any steps...

10. Solaris

Maintenance mode

i booted into maintenance mode boot -- -s from the console I got the Root password for system maintenance (control-d to bypass) I did control -d and then logged in it told me that I was booting into boot -s but after I did a control -d and logged in who -r shows ...

LEARN ABOUT OPENSOLARIS

sulogin

sulogin(1M)						  System Administration Commands					       sulogin(1M)

NAME

       sulogin - access single-user mode

SYNOPSIS

       sulogin

DESCRIPTION

       The sulogin utility is automatically invoked by init when the system is first started. It prompts the user to type a user name and password
       to enter system maintenance mode (single-user mode) or to type EOF (typically CTRL-D) for normal startup (multi-user mode). The user should
       never directly invoke sulogin. The user must have the solaris.system.maintenance authorization.

       The  sulogin utility can prompt the user to enter the root password on a variable number of serial console devices, in addition to the tra-
       ditional console device. See consadm(1M) and msglog(7D) for a description of how to configure a serial device to  display  the  single-user
       login prompt.

FILES

       /etc/default/sulogin

	   Default value can be set for the following flag:

	   PASSREQ

	       Determines if login requires a password. Default is PASSREQ=YES.

       /etc/default/login

	   Default value can be set for the following flag:

	   SLEEPTIME

	       If  present, sets the number of seconds to wait before login failure is printed to the screen and another login attempt is allowed.
	       Default is 4 seconds. Minimum is 0 seconds. Maximum is 5 seconds.

	       Both su(1M) and login(1) are affected by the value of SLEEPTIME.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsr			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       auths(1), login(1), consadm(1M), init(1M), su(1M), attributes(5), msglog(7D)

NOTES

       By default, the root user has all authorizations.

       Granting the solaris.system.maintenance authorization to the Console User Rights Profile may have an undesirable side  effect  of  granting
       the  currently logged in user maintenance mode access. The solaris.system.maintenance authorization should be directly granted to appropri-
       ate users rather than through the Console User Rights Profile.

SunOS 5.11							    21 Aug 2008 						       sulogin(1M)

10 More Discussions You Might Find Interesting

1. HP-UX

Maintenance mode boot(MMB) and recovery

Discussion started by: mxms755

2. Solaris

FTP is in maintenance mode always

Discussion started by: bullz26

3. Solaris

Process in maintenance mode, why?

Discussion started by: JVerstry

4. Solaris

Samba service in maintenance mode ???

Discussion started by: KenLynch