Sponsored Content
Full Discussion: PCI slot info on V480/V490
Operating Systems Solaris PCI slot info on V480/V490 Post 302215249 by incredible on Wednesday 16th of July 2008 01:32:53 AM
Old 07-16-2008
You can place the cards in any slot as long it can fit into the slot correctly. For some PCI cards, you will need to take note of the MHz whether its 33 or 66. Based on that, you will be able to see physically on the servers' slot and put the correct speed card into the correct slot. eg. if you accidentally place a 66MHz card into a 33 MHz slot, your card can still be used, but the speed will be degraded to 33 MHz.
 

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

device - > slot

Hi all.. I have a Sun Ultra 450 with a lot of drives and scsi controllers installed and i have one bad internal disk.. How can "map" ex /dev/dsk/c3t2d0s0 to a slot in the internal cabinet? Any good ideas? I dont want to remove the wrong disk :) thanks in advance.. (3 Replies)
Discussion started by: s93366
3 Replies

2. UNIX for Dummies Questions & Answers

bad pci slot?

Hi, im having a problem installing my pci wireless card. Im using knoppix, but my problem is with the mobo i think. im using an older laptop, toshiba satellite 2540 and when i plug in the card i get lights on sometimes. this means its getting power right. so then to install the card into the... (0 Replies)
Discussion started by: jestra
0 Replies

3. UNIX for Advanced & Expert Users

V480 w/ Solaris 9 boot problem

Our V480 w/ Solaris 9 would not boot properly. After recreating the LUNs on our StorEdge A1000, and then performing a reboot, the machine just keep cycling through the boot process. No error messages, it keeps trying to reboot over and over again. Any ideas? We managed to do a stop+a and... (6 Replies)
Discussion started by: xnightcrawl
6 Replies

4. Solaris

Telnet issue E5500/V480

Our old E5500 was just turned off (planned :rolleyes: ) and the application was moved to a V480. Now if I login to the V480 and try to sudo to root my connection hangs, and I can not telnet to the E5500 after it was powered on again. I get "connection refused". Telnet to this machine was... (5 Replies)
Discussion started by: kjbaumann
5 Replies

5. Solaris

Wipe a Sunfire V480

Hi Guys I'm new here in these forums and also in Sun Solaris/Sun hardware related things. I have some really basic questions about the way to go for "wipe" a Sun Solaris system. I have to sell a used Sunfire v480 and I wan't to wipe the old sytem before selling it. But I'm not sure if I... (6 Replies)
Discussion started by: slowatsch
6 Replies

6. Solaris

Solaris 8 on v480 & v490

Hello, Can any kind soul please answer this? I want to boot a SunFire v490 with a dvd image we use to boot v480's. Is this possible? Are there caveats to doing this? Thanks muchly, mgb (1 Reply)
Discussion started by: mgb
1 Replies

7. Solaris

Q:x4270_m2 reconfigure PCI card to slot 5?

Hello all, I have a problem with my x4270_m2 server. I have a GBE lan built into the back of my server and I have a QGE pci card in slot 2 to be used as a redundant. My server is not picking up the QGE lan card in slot2. From investigation of the /etc/path_to_inst, which shows: #grep e1000... (2 Replies)
Discussion started by: kerrygold
2 Replies

8. Programming

How to register ISR for PCI slot???

how to register callback function in unix?? (0 Replies)
Discussion started by: powyama
0 Replies

9. UNIX for Advanced & Expert Users

how to register ISR for PCI slot???

:wall::wall::wall:how to register ISR for PCI slot using callback registery (in c programing) i am using fedora 10 os.:wall::wall::wall::wall::wall: (0 Replies)
Discussion started by: powyama
0 Replies
PCI_CREATE_SLOT(9)						Hardware Interfaces						PCI_CREATE_SLOT(9)

NAME
pci_create_slot - create or increment refcount for physical PCI slot SYNOPSIS
struct pci_slot * pci_create_slot(struct pci_bus * parent, int slot_nr, const char * name, struct hotplug_slot * hotplug); ARGUMENTS
parent struct pci_bus of parent bridge slot_nr PCI_SLOT(pci_dev->devfn) or -1 for placeholder name user visible string presented in /sys/bus/pci/slots/<name> hotplug set if caller is hotplug driver, NULL otherwise DESCRIPTION
PCI slots have first class attributes such as address, speed, width, and a struct pci_slot is used to manage them. This interface will either return a new struct pci_slot to the caller, or if the pci_slot already exists, its refcount will be incremented. Slots are uniquely identified by a pci_bus, slot_nr tuple. There are known platforms with broken firmware that assign the same name to multiple slots. Workaround these broken platforms by renaming the slots on behalf of the caller. If firmware assigns name N to MULTIPLE SLOTS
The first slot is assigned N The second slot is assigned N-1 The third slot is assigned N-2 etc. PLACEHOLDER SLOTS
In most cases, pci_bus, slot_nr will be sufficient to uniquely identify a slot. There is one notable exception - pSeries (rpaphp), where the slot_nr cannot be determined until a device is actually inserted into the slot. In this scenario, the caller may pass -1 for slot_nr. The following semantics are imposed when the caller passes slot_nr == -1. First, we no longer check for an existing struct pci_slot, as there may be many slots with slot_nr of -1. The other change in semantics is user-visible, which is the 'address' parameter presented in sysfs will CONSIST SOLELY OF A DDDD
bb tuple, where dddd is the PCI domain of the struct pci_bus and bb is the bus number. In other words, the devfn of the 'placeholder' slot will not be displayed. COPYRIGHT
Kernel Hackers Manual 2.6. July 2010 PCI_CREATE_SLOT(9)
All times are GMT -4. The time now is 08:27 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy