07-14-2008
If you want to copy the partition table to another disk, perform
prtvtoc /dev/rdsk/cxtxdxs2 | fmthard -s - /dev/rdsk/cxtxdxs2
1st controller, target and disk should be the source and the 2nd cxtxdxs2 should be your dest disk.
Then newfs the slices accordingly.
After that, you can use ufsdump to copy the data into the relevant partitons.
10 More Discussions You Might Find Interesting
1. SuSE
Sir,
I using the following commands in a file (part of a bigger script):
#!/bin/bash
cd /opt/oracle/bin
ls -lt | tail -1 | awk '{print $6}' >> /tmp/ramb.out
If I run this from the command prompt the result is:
2007-05-16
if I run it as a cron job then... (5 Replies)
Discussion started by: rajranibl
5 Replies
2. Solaris
Hi All,
when i run the command prtvtoc the output shows
38309 cylinders
38307 accessible cylinders
as per my undertanding the 1st cylinder is used for storing the vtoc , how about the second cylinder ? where its used and for what purpose?
Thanks (9 Replies)
Discussion started by: kumarmani
9 Replies
3. Solaris
Hi all,
I am trying to use the disk for mirror where in the mirror disk is of 160 gb and the rootdisk is of 80 gb. when i am trying to write the vtoc i am getting below error
i tried the below command
#prtvtoc /dev/rdsk/c0t0d0s0 |fmthard -s -/dev/rdsk/c0t2d0s0
and got below
... (26 Replies)
Discussion started by: kumarmani
26 Replies
4. AIX
AIX:Command to get netaddress/subnet address command in IPv4/IP6
Can anybody help us with a command to retrieve netaddress/subnet address command in IPv4/IP6 on aix machine.
net/subnet address is in the format 172.16.212.0(signifies all 255 machines in an IPv4 network) (2 Replies)
Discussion started by: rookie8278
2 Replies
5. Shell Programming and Scripting
Hi everyone,
when executing this command in unix:
echo "WM7 Fatal Alerts:", $(cat query1.txt) > a.csvIt works fine, but running this command in a shell script gives an error saying that there's a syntax error.
here is content of my script:
tdbsrvr$ vi hc.sh
"hc.sh" 22 lines, 509... (4 Replies)
Discussion started by: 4dirk1
4 Replies
6. UNIX for Advanced & Expert Users
Hi,
Well my title isn't very clear I think. So to understand my goal:
I have a script "test1"
#!/bin/bash
xvkbd -text blabla
with xbindkeys, I bind F5 key in order it runs my test1 script
So when I press F5, test1 runs.
I'm under Emacs/Vi and I press F5 in order to have "blabla" be... (0 Replies)
Discussion started by: xib.be
0 Replies
7. UNIX for Dummies Questions & Answers
HI Guys,
I hope you are well. I am trying to write a script that gets executed every time i open a shell (cshell). I have two questions about that
1) I need to enter these commands
$ echo $DISPLAY
$ setenv $DISPLAY output_of_echo_$display_command
How can i write a... (2 Replies)
Discussion started by: kaaliakahn
2 Replies
8. Solaris
Hi,
I am trying to mirror a disk (which was already mirror and after breaking it, doing it again). This is root disk and in control of veritas. Somehow, slice information is not coming correctly on this. Can somebody give some pointer to fix it ?
root@tdrp091:/root# prtvtoc /dev/rdsk/c3t0d0s2 |... (6 Replies)
Discussion started by: solaris_1977
6 Replies
9. Solaris
Hi,
It is Solaris-10 with ZFS. c0t1d0 is original disk. c0t0d0 was faulty disk, which was replaced with new one and by mistake somebody ran opposite command
# prtvtoc /dev/rdsk/c0t0d0s0 | fmthard -s - /dev/rdsk/c0t1d0s0
Now rpool is in suspended state. Right now server is up, but allowing ssh... (6 Replies)
Discussion started by: solaris_1977
6 Replies
10. UNIX for Beginners Questions & Answers
Hello Forum,
I'm making very good progress on my report thanks to the very helpful people on this forum. I've been able to successfully create my report for my Red Hat servers. But I do have a few ubuntu servers in the mix and I'd like to capture some data from them when an ssh connection is... (8 Replies)
Discussion started by: greavette
8 Replies
prtvtoc(1M) System Administration Commands prtvtoc(1M)
NAME
prtvtoc - report information about a disk geometry and partitioning
SYNOPSIS
prtvtoc [-fhs] [-t vfstab] [-m mnttab] device
DESCRIPTION
The prtvtoc command allows the contents of the label to be viewed. The command can be used only by the super-user.
The device name can be the file name of a raw device in the form of /dev/rdsk/c?t?d?s2 or can be the file name of a block device in the
form of /dev/dsk/c?t?d?s2.
OPTIONS
The following options are supported:
-f Report on the disk free space, including the starting block address of the free space, number of blocks, and unused parti-
tions.
-h Omit the headers from the normal output.
-m mnttab Use mnttab as the list of mounted filesystems, in place of /etc/mnttab.
-s Omit all headers but the column header from the normal output.
-t vfstab Use vfstab as the list of filesystem defaults, in place of /etc/vfstab.
EXAMPLES
Example 1: Using the prtvtoc Command
The following example uses the prtvtoc command on a 424-megabyte hard disk:
example# prtvtoc /dev/rdsk/c0t3d0s2
* /dev/rdsk/c0t3d0s2 partition map
*
* Dimension:
* 512 bytes/sector
* 80 sectors/track
* 9 tracks/cylinder
* 720 sectors/cylinder
* 2500 cylinders
* 1151 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
* * First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 76320 76319 /
1 3 01 76320 132480 208799
2 5 00 0 828720 828719
5 6 00 208800 131760 340559 /opt
6 4 00 340560 447120 787679 /usr
7 8 00 787680 41040 828719 /export/home
example#
The data in the Tag column above indicates the type of partition, as follows:
Name Number
UNASSIGNED 0x00
BOOT 0x01
ROOT 0x02
SWAP 0x03
USR 0x04
BACKUP 0x05
STAND 0x06
VAR 0x07
HOME 0x08
ALTSCTR 0x09
CACHE 0x0a
RESERVED 0x0b
The data in the Flags column above indicates how the partition is to be mounted, as follows:
Name Number
MOUNTABLE, READ AND WRITE 0x00
NOT MOUNTABLE 0x01
MOUNTABLE, READ ONLY 0x10
Example 2: Using the prtvtoc Command with the -f Option
The following example uses the prtvtoc command with the -f option on a 424-megabyte hard disk:
example# prtvtoc -f /dev/rdsk/c0t3d0s2
FREE_START=0 FREE_SIZE=0 FREE_COUNT=0 FREE_PART=34
Example 3: Using the prtvtoc Command on a Disk Over One Terabyte
The following example uses uses the prtvtoc command on a disk over one terabyte:.
example# prtvtoc /dev/rdsk/c1t1d0s2
* /dev/rdsk/c1t1d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 3187630080 sectors
* 3187630013 accessible sectors
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 34 262144 262177
1 3 01 262178 262144 524321
6 4 00 524322 3187089340 3187613661
8 11 00 3187613662 16384 318763004
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO
devinfo(1M), fmthard(1M), format(1M), mount(1M), attributes(5)
WARNINGS
The mount command does not check the "not mountable" bit.
SunOS 5.10 25 Jul 2002 prtvtoc(1M)