07-05-2008
Thanks again..
How to use #vxdiskadm ? I have tried with some options of #vxdiskadm.
Same problem...
8 More Discussions You Might Find Interesting
1. IP Networking
I have Linux 7.1 setup on a Dell and am unable to bring up any interfaces. Both the lo and eth0 fail upon boot up and I get a insmod error possibly due to bad irq or IO setting.
If I disable eth0 upon boot, then lo works fine, but offcourse I get the "delaying initialization" upon boot for eth0... (1 Reply)
Discussion started by: alam
1 Replies
2. UNIX for Dummies Questions & Answers
The last thing I did was set REMOTE_LOGIN_PASSWORDFILE to EXCLUSIVE. Then rebooted server. Since that time I have not been able to login. During bootup it can't find root and generates alot of errors. Does anybody know of a default login and password that will allow me to log in and rebuild the... (2 Replies)
Discussion started by: mayewil
2 Replies
3. Red Hat
Hello,
I have few HDD and SSD installed in my RHEL 5 server. I want to know which disk are SDD and which are HDD. What command should I use?
Thanks (3 Replies)
Discussion started by: fahdmirza
3 Replies
4. Linux
Hi Guys,
I want to bring my server live.
I have Static public IP Address 123.99.88.77 (Say) and also I have also registered a domain name say(live server23.com) the domain name providers have also given me the control panel with DNS management settings.
I have gateway 192.168.1.1
Now My... (1 Reply)
Discussion started by: manalisharmabe
1 Replies
5. Solaris
:confused:
when i tried to look the status of DNS-client, it is in maintenance mode.....
Please tell me how to bring it back to online mode...PLEASE TELL ME STEP BY STEP.... PLEASE...
:wall: (2 Replies)
Discussion started by: vamshigvk475
2 Replies
6. Solaris
this is samiulla
in my vmware solaris 11 i installed iscsitgt pakage but it goes to maintenance
and i am unable to bring into online with svcadm clear iscsitgt
how can i forcefully online iscsitgt service. (1 Reply)
Discussion started by: samiulla
1 Replies
7. Shell Programming and Scripting
Hi Experts,
Problem summary :
I am facing the below problem on huge files when the disk is getting full on the half way through the execution.
If the disk was already full , the commands fail & everything is fine.
Sample Code :
head_rec_data_file=`head -1 sample_file.txt`
cat... (9 Replies)
Discussion started by: Pruthviraj_shiv
9 Replies
8. AIX
Hi all, I have the following in hacmp.out for bringing Resource group online.
Volume groups themselves are Enhanced-Capable and on each node I can varyon and mount filesystems.
+main1_rg_01:cl_activate_vgs STATUS=0
+main1_rg_01:cl_activate_vgs typeset -li STATUS
+main1_rg_01:cl_activate_vgs... (2 Replies)
Discussion started by: OdilPVC
2 Replies
vxdmp(7) Miscellaneous Information Manual vxdmp(7)
NAME
vxdmp - Veritas Volume Manager multipathing disk devices
DESCRIPTION
Multipathed disk devices in Veritas Volume Manager (VxVM) represent virtual devices with one or more physical access paths to a physical
disk. The Multipathing feature provides disk access reliability by dynamically switching to another physical path if there is a path fail-
ure.
Every disk that is visible to VxVM is represented by a multipath device node in the /dev/vx/dmp and /dev/vx/rdmp directories for block type
and character type interfaces. A simple disk is represented by a multipath device having one physical path, whereas a disk that is part of
a multiported disk array is represented by a multipath device with many device access paths depending upon the type of the disk array.
VxVM uses standard disk device naming conventions to name multipath devices. For example, if there is a disk device with two physical
access paths such as c1t0d0 and c2t0d0, the multipathing device node for this particular disk is created under /dev/vx/dmp and /dev/vx/rdmp
as c1t0d0 or c2t0d0.
To provide multipathing, VxVM maintains an internal database of all the multipathed devices detected by the system and their respective
paths. The database is created at system boot time. When disks are added or removed from the system, VxVM provides support to reconfigure
the multipath device database to reflect new states of the hardware, while the system is online.
To reconfigure the DMP database, run ioscan followed by insf, and then invoke vxdctl enable (see vxdctl(1M)).
The various access paths to a multipathed device can be seen by using a vxdisk command (see vxdisk(1M)). These commands open the multi-
pathing configuration device /dev/vx/dmpconfig to obtain the required information about the various paths to a multipathed device and their
states.
VxVM also provides the facility to enable or disable a disk controller. This feature can be used to stop all I/Os through a particular con-
troller to perform maintenance operations on it. Use the vxdmpadm command to do this and also perform other operations on the multipath
device database.
VxVM can provide notification about events that occur in the DMP database due to a change in hardware. See the vxnotify(1M) man page for
more information.
VxVM is capable of multipathing both Active/Active and Active/Passive disk arrays.
FILES
/dev/vx/dmp Multipathing block devices.
/dev/vx/rdmp Multipathing character devices.
SEE ALSO
ioctl(2), vxdctl(1M), vxdisk(1M), vxdmpadm(1M), vxnotify(1M)
VxVM 5.0.31.1 24 Mar 2008 vxdmp(7)