routing issues with multiple NIC cards Post: 302208188

10 More Discussions You Might Find Interesting

1. Solaris

NIC cards for sunblade 100

I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system. thanks

2. IP Networking

Setup 2 NIC cards in one UNIX system

Hi; I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now...

3. High Performance Computing

veritas and nic cards

Hello I have 2 machines with 3 NIC cards. When I setup veritas, I receive this message: e1000g1 has an IP address configured on it. It could be a public NIC on ken. Are you sure you want to use e1000g1 for the first private heartbeat link? As if e1000g1 should not have an IP address....

4. Red Hat

External NIC cards not pinging with each other in RHEL 5.1

We have a setup of two nodes which has two NIC cards in each. One is built in and another is D-Link (external NIC card). We are unable to ping to the external NIC cards in both. Eg: Node A has two IPs 192.168.1.10 (eth0) and 192.168.2.10 (eth1) and Node B has two IPs 192.168.1.20 (eth0) and...

5. Solaris

Network cards - Routing

Hi all I hate networking, I hate everything to do with it. Its something I do in anger in one contract, then forget. This is more of a question / than a problem. So, on a solaris 10 server, using older qfe cards, Ive got a sun truck with 4 nics (qfe0,3,4,7), and a ipmp pair (hemo0,qfe1)....

6. HP-UX

HP UX 9000 NIC CARDS

Hello, I am trying to move an HP UX from one locaion to another. The new location don't have any Fiber switches. On the back of my server I see 2 RJ 45 for console management the other for networking , the server also has a fiber NIC card. When I disconnec the fiber and want to user regular...

7. UNIX for Advanced & Expert Users

Solaris 10 routing table issues

Hello Hope someone can help with this problem. We are running Solaris 10 with a current kernel patch of 142900-09. We appear to be getting a serious issue with the routing table as shown below: Output from netstat -rnv Destination ....Mask ............Gateway ........Device...

8. IP Networking

Best reference for understanding low level info on nic cards drivers and functionality

Hi, What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..? Thanks

9. Ubuntu

Help asap squid with 2 nic cards setup

I found an old post that talks about 2 nice cards and it is driven by the IP address .... but I didn't understand it because the 2 people skipped information for me the newbie.. Can someone help me... I have the proxy server setup and I believe I have enabled the 2nd nic card, I just need one...

10. Ubuntu

How do you setup 2 nic cards for squid Ubuntu server?

I have a made my squid proxy, I now have add another nic card to an old CPU using Ubuntu server 12.04. I have seen another post similar however I am new and did not understand some of it. Something about redirecting IP address and IP table? I don't know how to do this.:confused:

LEARN ABOUT DEBIAN

amtterm

amtterm(1)						      General Commands Manual							amtterm(1)

NAME

       amtterm - Intel AMT serial-over-lan (sol) client.

SYNOPSIS

       amtterm [ options ] host [ port ]

DESCRIPTION

       amtterm	provides access to the serial-over-lan port of Intel AMT managed machines.  host is the hostname or IP address of the machine amt-
       term should connect to.	port is the tcp port to use and defaults to 16994 (standard AMT redirection port) if unspecified.

       For more inforamtions on Intel AMT check amt-howto(7).

OPTIONS

       -h     Display help text.

       -v     Be verbose (default).

       -q     Be quiet.

       -u <user>
	      Specify username, defaults to "admin".

       -p <pass>
	      Specify password.  amtterm will prompt on the terminal if unspecified.

ENVIRONMENT

       AMT_PASSWORD
	      Default value for the password.

SEE ALSO

       gamt(1), amttool(1), amt-howto(7)

AUTHOR

       (c) 2007 Gerd Hoffmann <kraxel@redhat.com>

							      (c) 2007 Gerd Hoffmann							amtterm(1)