Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: gateway
Operating Systems AIX gateway Post 302208078 by magasem on Monday 23rd of June 2008 02:27:32 AM
Old 06-23-2008
# netstat -rn
Routing tables
Destination Gateway Flags Refs Use If PMTU Exp Groups

Route Tree for Protocol Family 2 (Internet):
default 172.29.2.127 UGcA 0 0 en1 - - - =>
default 172.29.2.126 UGcA 0 0 en1 - - -10.96.70.81/32 172.29.2.126 UGc 0 0 en1 - - -
10.96.70.222 172.29.2.126 UGHW 2 2318 en1 - - - =>
10.96.70.222/32 172.29.2.126 UGc 0 0 en1 - - -
127/8 127.0.0.1 U 10 8961 lo0 - - -
172.20.239.192/32 255.255.255.254 UGc 0 0 en1 - - -
172.29.2/25 172.29.2.1 U 4 84890 en1 - - -
172.29.2.1 127.0.0.1 UGHS 5 73 lo0 - - - =>
172.29.2.1/32 172.29.2.126 UGc 0 0 en1 - - - =>
172.29.2.1/32 127.0.0.1 UG 0 0 lo0 - - -
172.29.2.126 172.29.2.1 UHSb 5 85182 en1 - - -
172.29.7.192/27 172.29.2.100 UGc 0 0 en1 - - -
172.29.7.197 172.29.2.100 UGHW 0 6 en1 - - - =>
172.29.7.197/32 172.29.2.100 UGc 0 0 en1 - - -
192.168.1.0 192.168.1.2 UHSb 0 0 en0 - - - =>
192.168.1/24 192.168.1.2 U 0 1 en0 - - -
192.168.1.2 127.0.0.1 UGHS 0 1 lo0 - - - =>
192.168.1.2/32 127.0.0.1 UG 0 0 lo0 - - -
192.168.1.255 192.168.1.2 UHSb 0 4 en0 - - -

Route Tree for Protocol Family 24 (Internet v6):
::1 ::1 UH 0 0 lo0 16896 - -


My problem appeared in above specific lines.
I have 2 Def.Gw I tried to delete from smitty but I can't, also I tried to delete by command but I faced problem in destination address. By the result above I need to proper way to delete GW:172.29.2.127.
If possible pls.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

gateway address

How can I change the gateway address on my sco Openserver 5.0.6. A cisco firewall is recently installed but the gateway on the system is still pointing at the old one. I want it to use the gateway address of the router. Please help. Thanks (2 Replies)
Discussion started by: sshokunbi
2 Replies

2. IP Networking

gateway

I used "route" to add the default gateway I wrote this: route add default 19x.x.x.x 0 but this is not permanent default gateway. Do I need to use another command? Thank a lot (2 Replies)
Discussion started by: lmena
2 Replies

3. Red Hat

gateway

Hi, in which file and how shuold be decalred a gateway and its IP adresse ? Where and how add a gateway ? Many thanks before. (3 Replies)
Discussion started by: big123456
3 Replies

4. Programming

how we can get gateway address

how we can get the gateway address. i know gethostname used for ipaddress how we can get the system gateway address. thank u inadvance, sree (2 Replies)
Discussion started by: phani_sree
2 Replies

5. SCO

SCO Gateway

Hy everybody ! I'm new on your forum, i'm french and don't speak a good english, so scuse me please for it ! I would to know how modify a gateway on a SCO 5.06 We have a problem, we have multi "beach" adress, one is 192.1.1.x, an other is 192.1.4.x Actually, the computer on 192.1.4.x... (2 Replies)
Discussion started by: LB59
2 Replies

6. AIX

Help with Default Gateway

Hi, I have two interfaces on m AIX 5.3 box. One going to 192.168.1.x and it has a gateway of 192.168.1.1. I configured the other gateway with 192.168.2.x and the default gateway as 192.168.2.1. But I can't get connectivity to the 192.168.2.1 network. Can someone help me out and let me know... (7 Replies)
Discussion started by: bbbngowc
7 Replies

7. Solaris

Gateway

Hi all, Just now i had change the gateway for a server Go to /etc/defaultrouter, change to 10.86.33.1 route delete default 10.86.39.222 route add default 10.86.33.1 now cannot telnet to the server already.. any idea? (5 Replies)
Discussion started by: SmartAntz
5 Replies

8. AIX

Can not Ping Gateway

Hello, I am new to Unix :D and have been trying to configure an AIX server running 5.3. I used smitty or smit to configure interface 0 on the server. I am able to ping the IP I set, however I am still unable to ping the gateway. I configured the IP by navigating to Communications Applications... (6 Replies)
Discussion started by: cdub50
6 Replies

9. Linux

GNUGK-How to setup static gateway to gateway routing

Dear Sir I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper. I am having a problem, configuring static call routing on GNUGK in the section ... (0 Replies)
Discussion started by: mfondoum
0 Replies

10. UNIX for Beginners Questions & Answers

Inconsistency between RedHat 6.5 global gateway and single gateway leads to loss of default gateway

Dear friends I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies

LEARN ABOUT DEBIAN

ecaccess-association-list

ECACCESS-ASSOCIATION-LIST(1p)				User Contributed Perl Documentation			     ECACCESS-ASSOCIATION-LIST(1p)

NAME

       ecaccess-association-list - List your ECtrans Associations

SYNOPSIS

       ecaccess-association-list -version|-help|-manual

       ecaccess-association-list [-debug] [-gateway name] [association-name]

DESCRIPTION

       List all your ECtrans Associations. When an association-name is specified then the details for this Association is displayed.

ARGUMENTS

       association-name (optional)
	       The name of the Association to retrieve the details.

OPTIONS

       -gateway name
	       This is the name of the ECaccess Gateway where the Associations are installed.  It is by default the Gateway you are connected to.
	       In order to get the name of your current Gateway you can use the ecaccess-gateway-name command. When using the commands at ECMWF
	       the default Gateway is always "ecaccess.ecmwf.int".

       -version
	       Display version number and exits.

       -help   Print a brief help message and exits.

       -manual Prints the manual page and exits.

       -debug  Display the SOAP messages exchanged.

EXAMPLES

       ecaccess-association-list

       List all your Associations on your default Gateway.

       ecaccess-association-list -gateway ecaccess.ecmwf.int ginko

       List the details of the Association ginko on the ecaccess.ecmwf.int Gateway.

SEE ALSO

       ecaccess-association-delete, ecaccess-association-get, ecaccess-association-protocol, ecaccess-association-put and ecaccess.

perl v5.14.2							    2012-04-16					     ECACCESS-ASSOCIATION-LIST(1p)
All times are GMT -4. The time now is 12:57 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy