vpar ignite Post: 302207570

10 More Discussions You Might Find Interesting

1. HP-UX

Need Ignite for HP-UX 10.20

Hello All, I need to bring down our old 9000 series d350, but my supervisor wants an ignite backup created. I cannot find ignite in the usual places (/opt/ignite) nor can I find it in swlist. As far as I can tell the cd's are long gone. Is there anywhere else I could look for ignite being...

2. HP-UX

Ignite and HP-UX 09.XX

I am looking to make bootable tape backups of four machines running HP-UX 09.02, 09.05 and 09.07. I successfully located Ignite 10.20 and installed it and made a backup on the one machine running HP-UX 10.20. I am having trouble locating information about Ignite for HP-UX 9. Does it exist? Is...

3. HP-UX

Ignite - make_net_recovery

I've read the Ignite User/Admin Guide but I'm having trouble figuring out if I can do a make_net_recovery if the ignite server and client server are on completely different networks? If this can be done is there any special configuration? If I initiate the command from the server it looks like it...

4. HP-UX

vPar Hardware Paths

I wonder if anyone could assist with this. We have taken over administration of an rp8440 that has been split into 2 nPars and has 4vPars per nPar. I have to add a network card into one of the vPars that was missed at the time the vPar was created. That bit i have no problem with. The...

5. HP-UX

vPar Boot Error

Hi All, Please help me out in below issue in creating vPar. We have one nPar in which we have to create 2 vPars, out of which first vPar is already created and it is running well which have local disk as a boot device.Now we have to create 2nd vPar which need to use SAN disk for booting....

6. HP-UX

Error with ignite

Works all. Depot shared via nfs dhcp working setting file system,network,root password,etc But when i start "go!" with installation,give me this error. How to fix,debug? Thanks http://s24.postimg.org/5hzbgk551/unixbell3.png

7. HP-UX

VPar hardware migration - ERRATA document

Hi guys, I'm moving some vPars from BL860c I2 and BL870c I2 using the DRD clone and relocation. In some case, as instance to upgrade to BL870c I2, the ERRATA document reports some additional driver to be added to the image made by the DRD and then recompile the kernel before the move to the...

8. HP-UX

VPAR Resource Capacity Limit

Hello Guys Could you please let me know the command to find the resource (vCPU & Memory) capacity limit for the VPAR's (HPUX 11.23) on integrity Virtual host servers running HPUX 11.31 OS. For eg. I want to know what is the max vCPU and memory that I can assign to one VPAR. The Base Virtual...

9. HP-UX

How to shutdown a vpar from another vpar?

Hi, How can I shutdown a vpar from another vpar ? Please provide the command. Thanks.

10. HP-UX

Ignite

Hi Does anybody know how to get hold of a very old (A.3.7.n) copy of the ignite software depot for HP-UX 10.20?

LEARN ABOUT HPUX

show_cached_server

show cached server(1m)													    show cached server(1m)

NAME

       show cached server - Displays address information of a server in the local clerk's cache

SYNOPSIS

       show cached server name

ARGUMENTS

       A simple name for the cached server.  The name can contain wildcard characters.

DESCRIPTION

       The show cached server command displays address information of a server in the local clerk's cache.  The following list describes the valid
       attributes: The directory cell name The protocol sequence and network address of the server node

   Privilege Required
       You must have read permission to the clerk.

NOTE

       This command is replaced at Revision 1.1 by the dcecp command and may not be provided in future releases of DCE.

EXAMPLES

       The following command displays all attributes of the cached server emv.	cdscp> show cached server emv*

			       SHOW
		  CACHED NAMESERVER   emv_udp
				 AT   1991-10-15-15:56:56
			       Name = /.../emv.abc.com
			      Tower = ncadg_ip_udp:14.20.14.32
			      Tower = ncacn_ip_tcp:14.20.14.32
			       SHOW
		  CACHED NAMESERVER   emv_tcp
				 AT   1991-10-15-15:56:57
			       Name = /.../emv.abc.com
			      Tower = ncadg_ip_udp:14.20.14.32
			      Tower = ncacn_ip_tcp:14.20.14.32

RELATED INFORMATION

       Commands: clear cached server(1m), define cached server(1m)

															    show cached server(1m)

10 More Discussions You Might Find Interesting

1. HP-UX

Need Ignite for HP-UX 10.20

Discussion started by: stay0ut

2. HP-UX

Ignite and HP-UX 09.XX

Discussion started by: whack_job

3. HP-UX

Ignite - make_net_recovery

Discussion started by: gonzotonka

4. HP-UX

vPar Hardware Paths

Discussion started by: Andyp2704