disks in solaris Post: 302205762

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

re-partition disks on solaris

hi all, i was wondering if i have some volume manager and i want to format all partitions/disks and re-create new slices can i use regular format command or what? i think veritas volume manager is already installed.

2. Solaris

Solaris x86 - 2 new disks

Have a compaq dl380 proliant installed with solaris.. It has a smart array 5i controller.. currently I have 2 18gb disks - mirrored as far as I can see... I have just put in 2 36gb disks (just physically put in) How do I get solaris to recognise them so I can use them? format command - only...

3. Solaris

Hard disks in solaris

I need to insert a new hard disk into a Sun Fire v210 machine. The (only) internal disk which is already in the machine is part number XRA-SC1CB-73G10K (DISK DRIVE ASSY. 73GB, 10K RPM, with SPUD BRACKET). I also have nearly endless access to IBM hard disks at extremely low prices and would there...

4. Shell Programming and Scripting

getting number of disks in solaris

5. Solaris

Solaris not recognizing RAID 5 disks

I've just installed Sol 10 Update 9 on a Sun 4140 server and have a RAID 1 configuration (2 136 Gb drives) for the OS and have created a RAID 5 array (6 136 GB) drives. When i log into the system I am unable to see the RAID 5 disks at all. I've tried using the devfsadm command but no luck and...

6. Solaris

Solaris raw disks info

Hi, I need the following information. 1. We have raw disks but how to identify raw disks. Is there any command to identify its type and size. 2. How to differentiate between disks which are used as file system and that are still available to be used as raw. I know we can use df -n to...

7. Solaris

Disks not reconize during solaris 10 installation

Hi all, I am installing Solaris 10 on a new server Sun Blade X6270. During the installation i get this error: ''disk not found'' I try to replug the disks but the same error eppear. Disks reference: SAS 146GB Seagate 10000RPM Do i need to install disk or controller's driver? or do another...

8. Solaris

list all solaris Disks

Hi Guy's can anyone advise me .. I have mapped some of EMC devices from EMC Storage to Sun Solaris server and I want to list all the disk which are assigned from the storage can anyone advise me with the command how to can I list all the disk in Solaris Thanks ..

9. Shell Programming and Scripting

Make 48 disks(files) on solaris 10

Hello, to simulate an environment with 48 disks using Solaris 10 x86, i try toMake 48 disks (files) with MKFILE : #for i in c{0,1,2,3,4,5}t{0,1,2,3,4,5,6,7}d0 >do > mkfile 100m $i >done But i received like result : #ls /test_zfs c{0,1,2,3,4,5}t{0,1,2,3,4,5,6,7}d0 Any help...

10. Solaris

How to determine if i have spare disks in Solaris?

Hi Guys, obviously new to SOLARIS SUN SPARC 5.10 I would really appreciate if you help me see how to find free disks available in my system. Like i am a linux admin. If i want to grow a file system in linux. I would first have a look at my volume groups to see if they have free PEs if not then...

LEARN ABOUT CENTOS

gnome-disks

GNOME-DISKS(1)							gnome-disk-utility						    GNOME-DISKS(1)

NAME

       gnome-disks - the GNOME Disks application

SYNOPSIS

       gnome-disks [OPTIONS]

DESCRIPTION

       gnome-disks is the command to launch the GNOME Disks application. Disks provides a way to inspect, format, partition and configure disks
       and block devices.

       The Disks application is single-instance. What this means is that if the application is not already running when the gnome-disks command is
       invoked, it will get launched and the command invocation will block until the application exits. Otherwise the existing application
       instance will be used and the gnome-disks command will exit immediately.

OPTIONS

       The following options are understood:

       --block-device DEVICE
	   Switches to the Disks application and selects the block device given by DEVICE (for example, /dev/sda).

       --block-device DEVICE --format-device [--xid WINDOW-ID]
	   Shows the "Format Volume" dialog for the block device given by DEVICE (for example, /dev/sdb1). If WINDOW-ID is given, makes the dialog
	   transient to the given XID.

       --help
	   Prints a short help text and exits.

AUTHOR

       Written by David Zeuthen <zeuthen@gmail.com> with a lot of help from many others.

BUGS

       Please send bug reports to either the distribution bug tracker or the upstream bug tracker at
       https://bugzilla.gnome.org/enter_bug.cgi?product=gnome-disk-utility.

SEE ALSO

       gnome-disk-image-mounter(1), udisks(8)

GNOME
								    March 2013							    GNOME-DISKS(1)

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

re-partition disks on solaris

Discussion started by: Bashar

2. Solaris

Solaris x86 - 2 new disks

Discussion started by: frustrated1

3. Solaris

Hard disks in solaris

Discussion started by: sprellari

4. Shell Programming and Scripting

getting number of disks in solaris

Discussion started by: achak01