06-13-2008
AIX 5.2 Maksysb Image backup/restore
Hello,
I am new to AIX, as I was primarily working on HP-UX servers.
We have some production servers and a couple of lab servers. We have upgraded over 40 servers from 5.2 to 5.3 running a particular application(1) using the golden 5.3 upgraded servers copy of makesysb. We have only two servers left to migrate from 5.2 to 5.3. These servers are running a different application(2) which has a Primary and Replica status.
The OS configurations are the same on the two servers application(2), but different than the 40 application(1) servers. We were wanting to peform a makesysb on the Primary AIX 5.2 server/application(2) and send it to a DAT tape. We would then take the DAT tape makesysb and install it on one of our LAB servers. We would then upgrade the lab server to 5.3 and create a makesysb. It sounds so simple!
The problem is we received a system email stating some of the following:
* Installing from a tape backup whose boot image is too large
* Backing up DMAPI filesystems
* 0512-064
Installing from a tape backup whose boot image is too large
This makes it sound like we are not going to be able to restore our lab server with the Primary AIX 5.2 makesysb.
How do we get a good makesysb from an AIX 5.2 server?
How do we install it on our LAB server?
Thank you!
10 More Discussions You Might Find Interesting
1. AIX
Hi all,
I have a large number of backup tapes which were originally written with the AIX "backup" command. I now need to convert these to "tar" format, but unfortunately I no longer have access to an AIX machine. I have been able to connect the old tape drive (3590) to a Linux box and it works... (2 Replies)
Discussion started by: jauru
2 Replies
2. AIX
Hello,
Some background so you can see what I'm trying to do on AIX:
In Windows its possible to partition a single hard drive into 2 separate logical paritions which may appear as a C and a D drive. It is then possible to to use 3rd party software such as Power Quest Drive Image to create a... (3 Replies)
Discussion started by: quickfirststep
3 Replies
3. Filesystems, Disks and Memory
Hello All,
I backed up my RHEL 4 as an image.
Then I restored the image on my machine. Everything went fine but I dont get the normal boot sequence as it used to come when I freshly installed RHEL4.
The messages that are shown when the system boots are something like-
" .....
EXT3-fs:... (2 Replies)
Discussion started by: shamik
2 Replies
4. Solaris
In a Solaris9 environment I'm trying to restore flash archive (flar) with SVM mirrored devices to same server via jumpstart server and it is failing to create boot file and drops down to a command prompt in single user mode, metastat -i and metastat -p output looks good when compared to the ones... (0 Replies)
Discussion started by: mbak
0 Replies
5. AIX
Dear Team:
I am new to this Forum and I need your help for my AIX restoration problem
its very urgent
my problem as follow
failure I have a Tivoli Storage Manger was installed on that server.
I created backup image using Tivoli and it created a set of files each file is around 2GB
so... (1 Reply)
Discussion started by: Firas_Abed
1 Replies
6. Red Hat
Hi,
I need to back up a RH file system (96G).
The files are oracle .dbf format some of which are 5G in size.
I know that tar has got a size restriction of 2G so I cannot use this.
Can anyone recommend an alternative way of backuping up this FS?
I have been looking at dump but this... (6 Replies)
Discussion started by: Duffs22
6 Replies
7. AIX
Pretty penny's.
Just remember that mksysb and savevg are just front-ends for backup.
In other words, backups on AIX are organized by volume groups. mksysb is specialized for rootvg and savevg is used for other volume groups.
Ignoring that rootvg also creates files needed to boot a system... (1 Reply)
Discussion started by: MichaelFelt
1 Replies
8. AIX
Hi Folks,
How to restore mksysb image on LPAR which is already having cloned AIX OS installed on hdisk0 (nothing configured, only full partition image is sitting on hdisk0)
Let me know.
Thank a lot. (1 Reply)
Discussion started by: snchaudhari2
1 Replies
9. Solaris
Hi!
I want to migrate Sun Fire v240 server (sun4u) with Solaris 10 update 6 to LDOM virtual host (sun4v). I was mount NFS directory from another server in /mnt and did this steps on v240
1) I add to the /var/sadm/system/admin/.platform
PLATFORM_GROUP=sun4v
# cat... (1 Reply)
Discussion started by: pbubentsov
1 Replies
10. AIX
Hello,
Running AIX 7.2 on Power9 bare-metal (no LPAR and no NIM server), in the process of creating a guide on MKSYSB process.
I understand that MKSYSB is a backup of the rootvg and we can exclude stuff via exclude.rootvg file, the rest of the data volumes are mapped to the system as LUNs via... (7 Replies)
Discussion started by: c3rb3rus
7 Replies
SLIST(1) slist SLIST(1)
NAME
slist - Lists available NetWare Servers
SYNOPSIS
slist [ pattern ]
DESCRIPTION
slist lists all NetWare Servers available in your network.
If slist does not print to a tty, the decorative header line is not printed, so that you can count the servers on your network by doing
slist | wc -l
OPTIONS
pattern
pattern is used to list only servers whose names match the specified pattern. For a server to be listed, the pattern must match the full
server name. You can use wildcards for the pattern, but you must protect these wildcards from any command line expansion by quoting.
Case doesn't matter.
EXAMPLE
slist "I*"
or
slist "i*"
List all available Netware servers on your Network, that begin with an "I".
SEE ALSO
ncpmount(8), ncpumount(8), pqlist(1), nprint(1)
CREDITS
slist was written by Volker Lendecke (lendecke@math.uni-goettingen.de)
BUGS
slist works only in IPX environment, as it uses SAP to find first server and then Bindery to get list of servers.
slist 01/07/1996 SLIST(1)