06-11-2008
SCO newbie here also:
I am receiving the message:
cpio: cannot open </dev/rStp0> for input
Should the tape be mounted using a mount command first?
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi. I have been having problems with restoring from a tape backup. I use the following cpio command:
find / -print | cpio -ouvB > /dev/rStp0
After running this cpio command, the screen will display all files, but when I try to read or restore the tape I get the following error:
Tape input... (1 Reply)
Discussion started by: cstovall
1 Replies
2. Filesystems, Disks and Memory
I have been restoring from tape some old data. I have done quite a few tapes and have had no problems until now.
The command I am running is "dd if=/dev/rmt/1hbn bs=1024 | tar -pBxF - ".
This is the second tape have have come up with the error "Not enough space". This tape has a couple of... (1 Reply)
Discussion started by: mtoombs
1 Replies
3. HP-UX
I am trying to do a restore on a backup tape (DDS2) and am having a little trouble. For one, I dont know how the tape was made, whether is was tar, cpio, dump..etc. Anyone know how to restore a tape without knowing the format of the backup? (5 Replies)
Discussion started by: bake255
5 Replies
4. AIX
Hello everyone
I have a tape with some information that I got
to restore, the tape was made with the fbackup
command in a hp box.
My question is that I have to restore in a Ibm
box, how can I do this ?
Thanks in advance (1 Reply)
Discussion started by: lo-lp-kl
1 Replies
5. SCO
Here is the scenario. We have an billing system that ran on SCO 5.0.6. The HP Netserver went dwon, along with SCSI disks. They are unretrievable. I installed an IDE HDD, and reinstalled SCO. I am not too familiar w/ SCO or UNIX, and need to know how to install Tape drive, and how to restore from... (11 Replies)
Discussion started by: jlewis808
11 Replies
6. Solaris
I have a T2000 server that is JumpStarted with Solaris 10 from the JumpStart server. Host name and IP address is changed after that. Then we backup the server using FLAR to tape:
root.damas# date; flarcreate -c -t -n "Sol10_cairo_image" -a "engineering@starsolutions.com" -R / /dev/rmt/0n ;... (2 Replies)
Discussion started by: StarSol
2 Replies
7. SCO
Looking for specifically naming convention for a tape device for SCO Unix
What full system backup command should I use for SCO UNIX (1 Reply)
Discussion started by: jedimaster
1 Replies
8. Solaris
Hope someone can help me here...
I've got to restore an E450 with 300MHz cpus which was running Solaris 2.6 from tape. Regrettably the boot drive has failed.
I've access to the first release of Solaris 2.6 CD's and to a set of Solaris 9 CD's.
I remember that different E450 CPUs needed different... (1 Reply)
Discussion started by: pamplemousse
1 Replies
9. SCO
Hello folks. I have the following problem:
I'm trying to create a tape backup of a list of files on a 10 year old server, running SCO Openserver 5.0.5 (the tape drive is a Seagate STD224000N, connected as a SCSI drive).
I then want to restore the contents of this tape onto a new server... (6 Replies)
Discussion started by: klabelkholosh
6 Replies
10. Emergency UNIX and Linux Support
Hi
I recently deleted my /etc but I had a backup on tape. I was able to boot the server with a cd-rom and mounted the /c1t0d0s0 which is where the root directory resides. However when I tried to restore the backup with tar xvf /dev/rmt/0n I wasn't successful even though I was able to use the tar... (2 Replies)
Discussion started by: rahmantanko
2 Replies
RESTOR(1M) RESTOR(1M)
NAME
restor - incremental file system restore
SYNOPSIS
restor key [ argument ... ]
DESCRIPTION
Restor is used to read magtapes dumped with the dump command. The key specifies what is to be done. Key is one of the characters rRxt
optionally combined with f.
f Use the first argument as the name of the tape instead of the default.
r or R The tape is read and loaded into the file system specified in argument. This should not be done lightly (see below). If the key is
R restor asks which tape of a multi volume set to start on. This allows restor to be interrupted and then restarted (an icheck -s
must be done before restart).
x Each file on the tape named by an argument is extracted. The file name has all `mount' prefixes removed; for example, /usr/bin/lpr
is named /bin/lpr on the tape. The file extracted is placed in a file with a numeric name supplied by restor (actually the inode
number). In order to keep the amount of tape read to a minimum, the following procedure is recommended:
Mount volume 1 of the set of dump tapes.
Type the restor command.
Restor will announce whether or not it found the files, give the number it will name the file, and rewind the tape.
It then asks you to `mount the desired tape volume'. Type the number of the volume you choose. On a multivolume dump the recom-
mended procedure is to mount the last through the first volume in that order. Restor checks to see if any of the files requested
are on the mounted tape (or a later tape, thus the reverse order) and doesn't read through the tape if no files are. If you are
working with a single volume dump or the number of files being restored is large, respond to the query with `1' and restor will read
the tapes in sequential order.
If you have a hierarchy to restore you can use dumpdir(1) to produce the list of names and a shell script to move the resulting
files to their homes.
t Print the date the tape was written and the date the filesystem was dumped from.
The r option should only be used to restore a complete dump tape onto a clear file system or to restore an incremental dump tape onto this.
Thus
/etc/mkfs /dev/rp0 40600
restor r /dev/rp0
is a typical sequence to restore a complete dump. Another restor can be done to get an incremental dump in on top of this.
A dump followed by a mkfs and a restor is used to change the size of a file system.
FILES
default tape unit varies with installation
rst*
SEE ALSO
dump(1), mkfs(1), dumpdir(1)
DIAGNOSTICS
There are various diagnostics involved with reading the tape and writing the disk. There are also diagnostics if the i-list or the free
list of the file system is not large enough to hold the dump.
If the dump extends over more than one tape, it may ask you to change tapes. Reply with a new-line when the next tape has been mounted.
BUGS
There is redundant information on the tape that could be used in case of tape reading problems. Unfortunately, restor doesn't use it.
RESTOR(1M)