Sponsored Content
Full Discussion: network management port
Operating Systems Solaris network management port Post 302203175 by upengan78 on Friday 6th of June 2008 07:22:08 PM
Old 06-06-2008
Error

Thanks

Quote:
if_network="true"
if_modem="false"
if_connection="ssh"
if_emailalerts="false"
sys_autorestart="xir"
sys_bootrestart="none"
sys_bootfailrecovery="none"
sys_maxbootfail="3"
sys_xirtimeout="900"
sys_boottimeout="900"
sys_wdttimeout="60"
netsc_tpelinktest="true"
netsc_dhcp="false"
netsc_ipaddr="192.168.1.5"
netsc_ipnetmask="255.255.255.0"
netsc_ipgateway="192.168.1.1"
mgt_mailhost=""
mgt_mailalert=""
sc_customerinfo=""
sc_escapechars="#."
sc_powerondelay="false"
sc_powerstatememory="false"
sc_clipasswdecho="true"
sc_cliprompt="sc"
sc_clitimeout="0"
sc_clieventlevel="2"
sc_backupuserdata="true"
sys_eventlevel="2"

Is this correct ?

I am not able to connect when I do ssh 192.168.1.5

cable is connected from NM port to switch

GW is pingable. ( from the host itself )
Quote:
ping -s 192.168.1.1
PING 192.168.1.1: 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0. time=0.618 ms
64 bytes from 192.168.1.1: icmp_seq=1. time=0.648 ms
^X^C
----192.168.1.1 PING Statistics----
2 packets transmitted, 2 packets received, 0% packet loss
round-trip (ms) min/avg/max/stddev = 0.618/0.633/0.648/0.021

Last edited by upengan78; 06-06-2008 at 08:28 PM..
 

8 More Discussions You Might Find Interesting

1. Solaris

disconnecting from serial management port

On v240's and v440's whenever i connect my laptop to the serial management port and when either the laptop goes into sleep mode, or i physicall disconnect the cable, the solaris boxes go to the ok prompt!!!! anyone have any idea... (3 Replies)
Discussion started by: csaunders
3 Replies

2. IP Networking

network speed not tale with the port setting

Hi all, one of my Sun Box facing the problem. The network port i had set to Auto-Negotiated and i had edited the /etc/system/ file in the Sun box as below: set hme:hme_adv_autoneg_cap=1 set hme:hme_adv_100fdx_cap=0 set hme:hme_adv_100hdx_cap=0 But when i checked the /var/adm/messages/, it... (0 Replies)
Discussion started by: AirWalker83
0 Replies

3. IP Networking

Network Management Software

We are a small legal firm in the UK and looking to upgrade from some open source network management tools we are using. I'm not finding very many commercially supported network management software solutions that run on Linux or UNIX for that matter. Does anyone have any recommendations? ... (2 Replies)
Discussion started by: ctrenton
2 Replies

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies

5. Solaris

How to clear network socket port 17005?

:)Hi Solaris Experts, I am wondering whether it is possible to clear a network socket port 17005 left by Apache Tomcat/6.0.20 after having to terminate it forcefully, since it has run away due to remote JDBC resource contention on another server. A normal Tomcat stop / shutdown proves... (2 Replies)
Discussion started by: gjackson123
2 Replies

6. IP Networking

Facing issue in ip6table rule for port based routing management

Hi, Please help me on issue described below, I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4. M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop. At M2, I have done following,... (1 Reply)
Discussion started by: rahulbhansali24
1 Replies

7. Infrastructure Monitoring

How do I know what traffic is in network port?

If I would like to know what connection , data , traffic in a network port ( eth0 ) , what can I do ? ps. because I always found the network is very slow , so I would like what the network port is doing . Thanks Login ID ust3 is currently in read-only mode for multiple infractions. Creating... (0 Replies)
Discussion started by: ust03
0 Replies

8. UNIX for Beginners Questions & Answers

Check network Linux management

hi, how can I make a acquaintance with the command ifconfig -a which address ip mangement. Thank you regards Francesco Itollo (2 Replies)
Discussion started by: Francesco_IT
2 Replies
IpfilterDlfConverter(3pm)				  LogReport's Lire Documentation				 IpfilterDlfConverter(3pm)

NAME
Lire::Firewall::IpfilterDlfConverter - convert ipf (ipmon) logs to firewall DLF DESCRIPTION
Lire::Firewall::IpfilterDlfConverter converts Ipfilter logs into firewall DLF format. Input for this converter is the standard ipf syslog log file as produced by ipmon. IP Filter is shipped with FreeBSD, OpenBSD (up to 2.9) and some other OS's. EXAMPLE
A ipfilter logfile which looks like Oct 30 07:42:29 rolle ipmon[16747]: 07:42:28.585962 ie0 @0:9 b 192.168.48.1,45085 -> 192.168.48.2,22 PR tcp len 20 64 -S OUT Oct 30 07:40:24 rolle ipmon[16747]: 07:40:23.631307 ep1 @0:6 b 192.168.26.5,113 -> 192.168.26.1,3717 PR tcp len 20 40 -AR OUT Oct 30 07:42:29 rolle ipmon[16747]: 07:42:28.585962 ie0 @0:9 b 192.168.48.1,45085 -> 192.168.48.2,22 PR tcp len 20 64 -S OUT Oct 30 07:44:11 rolle ipmon[16747]: 07:44:10.605416 2x ep1 @0:15 b 192.168.26.1,138 -> 192.168.26.255,138 PR udp len 20 257 IN Oct 30 07:44:34 rolle ipmon[16747]: 07:44:33.891869 ie0 @0:10 b 192.168.48.1,23406 -> 192.168.48.2,22 PR tcp len 20 64 -S OUT Oct 30 07:49:13 rolle ipmon[16747]: 07:49:12.554420 ep1 @0:15 b 210.132.100.117 -> 192.168.26.5 PR icmp len 20 56 icmp 3/3 for 192.168.26.5,61915 - 210.132.100.117,53 PR udp len 20 23040 IN Oct 30 07:50:23 rolle ipmon[16747]: 07:50:22.908107 ep1 @0:15 b 210.132.100.117 -> 192.168.26.5 PR icmp len 20 56 icmp 3/3 for 192.168.26.5,4480 - 210.132.100.117,53 PR udp len 20 19712 IN Oct 30 07:56:11 rolle ipmon[16747]: 07:56:11.113029 2x ep1 @0:15 b 192.168.26.1,138 -> 192.168.26.255,138 PR udp len 20 257 IN (that's: .... 'PR' protocol 'len' length_of_ip_headers_saved packetlength direction) will get converted to something like 994398737 denied igmp 100.187.115.1 - ep1 LIRE_NOTAVAIL 224.0.0.2 - 56 994398861 denied igmp 100.187.115.1 - ep1 LIRE_NOTAVAIL 224.0.0.1 - 56 994398862 denied igmp 100.187.115.1 - ep1 LIRE_NOTAVAIL 224.0.0.2 - 56 994406849 denied udp 192.168.26.4 137 ie0 LIRE_NOTAVAIL 192.168.26.255 137 116 994406850 denied udp 192.168.26.4 137 ie0 LIRE_NOTAVAIL 192.168.26.255 137 116 994406866 denied udp 192.168.26.4 137 ie0 LIRE_NOTAVAIL 192.168.26.255 137 98 SEE ALSO
ipl(4) for description of log structure. The ipmon.c source (e.g. on http://www.openbsd.org/cgi-bin/cvsweb/~checkout~/ src/usr.sbin/ipmon/Attic/ipmon.c?rev=1.27& content-type=text/plain&hideattic=0 ) for the specification of the log syntax. The IP Filter webpage on http://coombs.anu.edu.au/~avalon/ip-filter.html AUTHOR
Joost van Baal <joostvb@logreport.org>, Wessel Dankers <wsl@logreport.org> VERSION
$Id: IpfilterDlfConverter.pm,v 1.7 2009/03/15 08:10:55 vanbaal Exp $ COPYRIGHT
Copyright (C) 2001-2003 Stichting LogReport Foundation LogReport@LogReport.org This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program (see COPYING); if not, check with http://www.gnu.org/copyleft/gpl.html. Lire 2.1.1 2009-03-15 IpfilterDlfConverter(3pm)
All times are GMT -4. The time now is 05:05 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy