network management port Post: 302203150

8 More Discussions You Might Find Interesting

1. Solaris

disconnecting from serial management port

On v240's and v440's whenever i connect my laptop to the serial management port and when either the laptop goes into sleep mode, or i physicall disconnect the cable, the solaris boxes go to the ok prompt!!!! anyone have any idea...

2. IP Networking

network speed not tale with the port setting

Hi all, one of my Sun Box facing the problem. The network port i had set to Auto-Negotiated and i had edited the /etc/system/ file in the Sun box as below: set hme:hme_adv_autoneg_cap=1 set hme:hme_adv_100fdx_cap=0 set hme:hme_adv_100hdx_cap=0 But when i checked the /var/adm/messages/, it...

3. IP Networking

Network Management Software

We are a small legal firm in the UK and looking to upgrade from some open source network management tools we are using. I'm not finding very many commercially supported network management software solutions that run on Linux or UNIX for that matter. Does anyone have any recommendations? ...

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

5. Solaris

How to clear network socket port 17005?

:)Hi Solaris Experts, I am wondering whether it is possible to clear a network socket port 17005 left by Apache Tomcat/6.0.20 after having to terminate it forcefully, since it has run away due to remote JDBC resource contention on another server. A normal Tomcat stop / shutdown proves...

6. IP Networking

Facing issue in ip6table rule for port based routing management

Hi, Please help me on issue described below, I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4. M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop. At M2, I have done following,...

7. Infrastructure Monitoring

How do I know what traffic is in network port?

If I would like to know what connection , data , traffic in a network port ( eth0 ) , what can I do ? ps. because I always found the network is very slow , so I would like what the network port is doing . Thanks Login ID ust3 is currently in read-only mode for multiple infractions. Creating...

8. UNIX for Beginners Questions & Answers

Check network Linux management

hi, how can I make a acquaintance with the command ifconfig -a which address ip mangement. Thank you regards Francesco Itollo

LEARN ABOUT OPENSOLARIS

auscope

AUSCOPE(1)						      General Commands Manual							AUSCOPE(1)

NAME

       auscope - Network Audio System Protocol Filter

SYNOPSIS

       auscope [ option ] ...

DESCRIPTION

       auscope	is  an	audio  protocol  filter  that can be used to view the network packets being sent between an audio application and an audio
       server.

       auscope is written in Perl, so you must have Perl installed on your machine in order to run  auscope.   If  your  Perl  executable  is  not
       installed  as  /usr/local/bin/perl,  you should modify the first line of the auscope script to reflect the Perl executable's location.  Or,
       you can invoke auscope as

       perl auscope [ option ] ...

       assuming the Perl executable is in your path.

       To operate, auscope must know the port on which it should listen for audio clients, the name of the desktop  machine  on  which	the  audio
       server  is running and the port to use to connect to the audio server.  Both the output port (server) and input port (client) are automati-
       cally biased by 8000.  The output port defaults to 0 and the input port defaults to 1.

ARGUMENTS

       -i<input-port>
	       Specify the port that auscope will use to take requests from clients.

       -o<output-port>
	       Determines the port that auscope will use to connect to the audio server.

       -h<audio server name>
	       Determines the desktop machine name that auscope will use to find the audio server.

       -v<print-level>
	       Determines the level of printing which auscope will provide.  The print-level can be 0 or 1.  The larger  numbers  provide  greater
	       output detail.

EXAMPLES

       In  the	following  example,  mcxterm is the name of the desktop machine running the audio server, which is connected to the TCP/IP network
       host tcphost.  auscope uses the desktop machine with the -h command line option, will listen for client requests on port 8001  and  connect
       to the audio server on port 8000.

       Ports  (file  descriptors)  on the network host are used to read and write the audio protocol.  The audio client auplay will connect to the
       audio server via the TCP/IP network host tcphost and port 8001:

	      auscope -i1 -o0 -hmcxterm

	      auplay -audio tcp/tcphost:8001 dial.snd

       In the following example, the auscope verbosity is increased to 1, and the audio client autool will connect to the  audio  server  via  the
       network host tcphost, while displaying its graphical interface on another server labmcx:

	      auscope -i1 -o0 -hmcxterm -v1

	      autool -audio tcp/tcphost:8001 -display labmcx:0.0

SEE ALSO

       nas(1), perl(1)

COPYRIGHT

       Copyright 1994 Network Computing Devices, Inc.

AUTHOR

       Greg Renda, Network Computing Devices, Inc.

								       1.9.3								AUSCOPE(1)