PUPPET-DEVICE(8)						   Puppet manual						  PUPPET-DEVICE(8)

NAME

       puppet-device - Manage remote network devices

SYNOPSIS

       Retrieves all configurations from the puppet master and apply them to the remote devices configured in /etc/puppet/device.conf.

       Currently must be run out periodically, using cron or something similar.

USAGE

       puppet device [-d|--debug] [--detailed-exitcodes] [-V|--version]

		       [-h|--help] [-l|--logdest syslog|<file>|console]
		       [-v|--verbose] [-w|--waitforcert <seconds>]

DESCRIPTION

       Once the client has a signed certificate for a given remote device, it will retrieve its configuration and apply it.

USAGE NOTES

       One need a /etc/puppet/device.conf file with the following content:

       [remote.device.fqdn] type type url url

       where: * type: the current device type (the only value at this time is cisco) * url: an url allowing to connect to the device

       Supported url must conforms to: scheme://user:password@hostname/?query

       with:  * scheme: either ssh or telnet * user: username, can be omitted depending on the switch/router configuration * password: the connec-
       tion password * query: this is device specific. Cisco devices supports an enable parameter whose value would be the enable password.

OPTIONS

       Note that any configuration parameter that's valid in the configuration file is also a valid long argument.  For  example,  'server'  is  a
       valid configuration parameter, so you can specify '--server servername' as an argument.

       --debug
	      Enable full debugging.

       --detailed-exitcodes
	      Provide  transaction  information  via exit codes. If this is enabled, an exit code of '2' means there were changes, an exit code of
	      '4' means there were failures during the transaction, and an exit code of '6' means there were both changes and failures.

       --help Print this help message

       --logdest
	      Where to send messages. Choose between syslog, the console, and a log file. Defaults to sending messages to syslog, or  the  console
	      if debugging or verbosity is enabled.

       --verbose
	      Turn on verbose reporting.

       --waitforcert
	      This  option only matters for daemons that do not yet have certificates and it is enabled by default, with a value of 120 (seconds).
	      This causes +puppet agent+ to connect to the server every 2 minutes and ask it to sign a certificate request. This is useful for the
	      initial setup of a puppet client. You can turn off waiting for certificates by specifying a time of 0.

EXAMPLE

	 $ puppet device --server puppet.domain.com

AUTHOR

       Brice Figureau

COPYRIGHT

       Copyright (c) 2011 Puppet Labs, LLC Licensed under the Apache 2.0 License

Puppet Labs, LLC						     June 2012							  PUPPET-DEVICE(8)