Sunfire V100 console access Post: 302198505

10 More Discussions You Might Find Interesting

1. HP-UX

Access with console.

hi, is it possible to have a console access on a HP UX system without Web Console ? If yes, how ??? Many thanks in advance. :D

2. Solaris

Root Password Missing from Sunfire V100

Hi I have a Sunfire V100 server. When I boot it up I get a logon that say "sunfs console logon". Unfortunally I do not know what the root password is. I do have access to LOM, and I have trouble getting into the "OK" prompt. The way I get into the "OK" prompt is that I boot the server up, then...

3. Solaris

Network Path Not Found Error "Sunfire V100"

I recently got this new old server from a friend. I just installed a fresh version of Solaris 10 on it. I have put a static IP of 192.168.100.10 the server. Their is no subnetting scheme on the network. And I made the hostname "SunServ." And I also changed the folder "/etc/inet/hosts" because I...

4. Solaris

PC memory on sunfire v100

i have a sunfire v100 machine with 256mb memory. Can i install a PC memory on sunfire v100? someone on irc told me that this is possible, by toggling jp7 which enables/disables pc133u/pc133. can someone please explain if this is true? thanks

5. Solaris

how to go to system console through ALOM in Sunfire V245

Hello , I am connecting sumfire v245 server to my laptop Through ALOM method.i got the ALOM prompt but after that i am typing sc> console to go to system console but i am not able to,after typing console only this line is coming Type #. to go back to ALOM. What to do ?? That server having...

6. Shell Programming and Scripting

how to access console of a switch having rj45 on switch side to db 9 female on pc side console cable

hi, how to access console of a switch having rj45 on switch side to db 9 female on pc side console cable which needs to be connected to one console server having rj11 on its side and db 9 female on other end.i.e. on switch side,console cable has rj45 and db 9 pin female connector on other side of...

7. Solaris

Sunfire V100 commands help

My coworkers and I are trying to pull DNS settings off of an old Sunfire V100 server, We have the username and password but are unable to figure out the commands to access any of the needed information. Is there somewhere I could look in order to get the commands? Or does anyone know the series of...

8. Solaris

Is it ALOM password I am stuck with? SunFire V100

Hi, I got a SunFire V100 and following its manual on how to establish a connection to this server, I connected to it via HyperTerminal. However, I am stuck at the login prompt. When powered on, this workstation goes through the regular cycle of OS banner and version printout, checking the...

9. AIX

How to access console for P650 server.

Hi Everyone, we had a one IBM P650 standalone server, planning to install AIX OS on top of it, I don't have HMC, is their a way to access to console of the server using serial cable or any other option for installing OS on top of it. Thanks,

10. Emergency UNIX and Linux Support

Solaris: Not able to access E2900 console

Hi, I have a scheduled activity to reboot E2900 server. But suddenly I came to know that console ip is not pinging, not connecting via telnet, as it used to connect. I already checked with my onsite person and he changed cable, still no luck. Network person checked his switch, which is showing...

LEARN ABOUT SUSE

laptop_mode

LAPTOP_MODE(8)						      System Manager's Manual						    LAPTOP_MODE(8)

NAME

       /usr/sbin/laptop_mode - apply laptop mode settings

SYNOPSIS

       /usr/sbin/laptop_mode [ cmd ] [ force ]

DESCRIPTION

       This  manual  page  documents  briefly  the  /usr/sbin/laptop_mode command. laptop_mode is a program that applies the settings given in the
       /etc/laptop-mode/laptop-mode.conf configuration file. The primary use is to control the laptop mode feature included in Linux kernels  with
       versions  2.6.6	and  higher,  and  2.4.23  and	higher.  This feature increases battery life by letting your hard drive spin down. This is
       achieved by grouping disk write activity into "chunks" that are spaced at larger intervals than they normally would be. In addition to sup-
       porting	the  Linux  kernel's  laptop  mode  feature, /usr/sbin/laptop_mode also supports various power saving modules which are configured
       through configuration files in the /etc/laptop-mode/conf.d directory.

       It is not recommended to call /usr/sbin/laptop_mode directly to start or stop laptop mode, except in hardware event handlers. To apply  new
       configuration settings from laptop-mode.conf, call the laptop-mode service init script with the reload parameter.

COMMANDS

       Specify force as the second parameter to force laptop_mode to re-apply a state even if the computer is already in that state. These are the
       values that are allowed for cmd :

       auto	 Enable or disable laptop mode based on the current power state. Note that this will not do anything if  the  laptop-mode  service
		 has not been started!

       status	 Display a status report about everything that laptop_mode affects.

SEE ALSO

       laptop-mode.conf(8).

AUTHOR

       This  manual  page was written by Bart Samwel (bart@samwel.tk) for the Debian system (but may be used by others).  Permission is granted to
       copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later  version  published	by
       the Free Software Foundation.

       On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.

																    LAPTOP_MODE(8)