Here is an example of something I had to write recently
My input file had customer info and auto info. My goal was to combine records where a customer had more than one auto, so only one letter would be sent. Random notes:
comptxt is what I am comparing, the customer info
autotxt is the vehicle specifics
comptxts hold the saved information
you will see me write lots of "|" pipes, so I can later easily manipulate the data
the script must do a last write since I fall out of the loop when done reading, but I did not write the last record
For you, compare cut -c1-15 similar to my comptxt, and cut -c17-20 similar to my autotxt.
Lastly, there might be a few other variables in that code section you can ignore as they were more for my purposes (like vehcnt).
hey gents,
I'm working on something that will use snmpwalk to query the devices on my network and retreive the device name, device IP, device model and device serial. I'm using Nmap for the enumeration and sed to clean up the results for use by snmpwalk. Once i get all the data organized I'm... (8 Replies)
Hi again:
Following the thread:
https://www.unix.com/shell-programming-scripting/147755-format-lines-file.html
I couldn't solve my problem, so I ask you again gurus:
I have this code:
nohup /usr/sbin/auditstream | /usr/sbin/auditselect -m -e "event== S_ENVIRON_WRITE || event==... (2 Replies)
Hi,
I have a requirement with,
No~Dt~Notes
1~2011/08/1~"aaa
bbb
ccc
ddd
eee
fff
ggg
hhh"
Single column alone got splitted into multiple lines.
I require the output as
No~Dt~Notes
1~2011/08/1~"aaa<>bbb<>ccc<>ddd<>eee<>fff<>ggg<>hhh"
mean to say those new lines to be... (1 Reply)
Hi all,
I have a single line output like below
echo $ips
10.26.208.28 10.26.208.26 10.26.208.27
want to convert above single line output as below format. Pls advice how to do ?
10.26.208.28
10.26.208.26
10.26.208.27
Regards
Kannan (6 Replies)
here is what i want to achieve.. i have a file with below contents
cat fileName
blah blah blah
.
.DROP this
REJECT that
.
--sport 7800 -j REJECT --reject-with icmp-port-unreachable
--dport 7800 -j REJECT --reject-with icmp-port-unreachable
.
.
.
more blah blah blah
--dport 3306... (14 Replies)
Hi All,
I am reading a line from a file and writing it to other file.
Whenever I got a particular line then I want that line to be splited into 4 line and written it to new file. e.g My line is
U_ABC connector3 pin24E connector4 pin25E connector5 pin26E connector6 pin27E connector7... (2 Replies)
I need to match two patterns in a log file and need to get the next line of the one of the pattern (out of two patterns) that is matched,
finally need to print these three values in a single line.
Sample Log:
2013/06/11 14:29:04 <0999> (725102) Processing batch 02_1231324
2013/06/11... (4 Replies)
Hello,
I have below format log file,
Comparing csv_converted_files/2201/9747.1012H67126.5077292103609547345.csv and csv_converted_files/22019/97447.1012H67126.5077292103609547345.csv
Comparing csv_converted_files/2559/9447.1012H67126.5077292103609547345.csv and... (6 Replies)
Hi Guys,
I am trying to format my csv file. When I spool the file using sqlplus the single row output is wrapped on three lines.
Somehow I managed to format that file and finally i am trying to make the multiple line on single line.
The below command is working fine but I need to pass the... (3 Replies)
CUT(1) FSF CUT(1)NAME
cut - remove sections from each line of files
SYNOPSIS
cut [OPTION]... [FILE]...
DESCRIPTION
Print selected parts of lines from each FILE to standard output.
Mandatory arguments to long options are mandatory for short options too.
-b, --bytes=LIST
output only these bytes
-c, --characters=LIST
output only these characters
-d, --delimiter=DELIM
use DELIM instead of TAB for field delimiter
-f, --fields=LIST
output only these fields; also print any line that contains no delimiter character, unless the -s option is specified
-n with -b: don't split multibyte characters
-s, --only-delimited
do not print lines not containing delimiters
--output-delimiter=STRING
use STRING as the output delimiter the default is to use the input delimiter
--help display this help and exit
--version
output version information and exit
Use one, and only one of -b, -c or -f. Each LIST is made up of one range, or many ranges separated by commas. Each range is one of:
N N'th byte, character or field, counted from 1
N- from N'th byte, character or field, to end of line
N-M from N'th to M'th (included) byte, character or field
-M from first to M'th (included) byte, character or field
With no FILE, or when FILE is -, read standard input.
AUTHOR
Written by David Ihnat, David MacKenzie, and Jim Meyering.
REPORTING BUGS
Report bugs to <bug-coreutils@gnu.org>.
COPYRIGHT
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
LAR PURPOSE.
SEE ALSO
The full documentation for cut is maintained as a Texinfo manual. If the info and cut programs are properly installed at your site, the
command
info cut
should give you access to the complete manual.
cut (coreutils) 4.5.3 February 2003 CUT(1)