Sponsored Content
Operating Systems Solaris Solaris 10 is not booting after installation Post 302196727 by edsonede on Monday 19th of May 2008 09:11:26 AM
Old 05-19-2008
Solaris 10 is not booting

just enter the following commands if it is an x86 based system

root (hd0,0,a)

kernel /platform/i86pc/multiboot

module /platform/i86pc/boot_archive

boot

after u run these commands the OS will come up. Ensure to check if the partition is 0 from command 1
 

7 More Discussions You Might Find Interesting

1. Linux

Mandrake 8.00 installation/Booting problem...Plz Help

Hey everyone, I'm new to the forum. I have a problem with Mandrake 8.00; i have installed it on my old PC with no problems (none mentioned) but on re-booting after the installation it just hangs after listing the devices: Hard Disk, CD-ROM & Floppy A. I have installed it on Packard Bell with... (2 Replies)
Discussion started by: sybella1
2 Replies

2. Solaris

installation of Solaris: installation bypasses network config.

hello solaris friends, I've tried installing Sun Solaris 10.0, but everytime it seems to bypass the network config. screen that looks similar to this...here's the url: http://www.hup.hu/old/images/hup/Solaris/Sol10beta7/9.png I'm able to install it all the way through but I get no... (2 Replies)
Discussion started by: cadmiumgreen
2 Replies

3. Solaris

Solaris m/c not booting

My Solaris machine is not booting.It just stops at the point Boot device: /pci@1e,600000/ide@d/disk@0,0:a File and args: Whether i try boot or boot -s it is stopping at this point.. I tried boot cdom -s.It went into single user mode but I am not able to run a fsck in this mode. Right... (1 Reply)
Discussion started by: lydiaEd
1 Replies

4. Linux

Problem in dual booting installation of linux on windows

Dear friends, I am experiencing the trouble while installing the Red Hat Linux 4 on top of windows XP, after booting its asking "What type of media contains the packages to be installed". Steps I followed: Step 1: left the free space as unpartitioned, (I also tried with the FAT32... (1 Reply)
Discussion started by: suneelieg
1 Replies

5. UNIX for Dummies Questions & Answers

Help with booting Solaris 9

Folks; I have a Solaris 9 server that after power outage it won't come fully up and i was able to bring it up in single user mode and checked "/var/log/messages" & "/var/adm/messages" with nothing showing since Sept. 17. i ran fsck and no luck. I ran all tests from the OK prompt with no luck... (2 Replies)
Discussion started by: Katkota
2 Replies

6. Solaris

Booting Solaris 10/09

What type of communication does Solaris 10/09 need to do with it's default gateway before it can boot up? (7 Replies)
Discussion started by: bstauffer
7 Replies

7. Solaris

Solaris 10 flash installation - fatal error. Solaris installation program exited.

Not very helpful to say the least. Seems to read the flar file and go through the upgrade and then come up with this error. Any ideas? (1 Reply)
Discussion started by: psychocandy
1 Replies
installboot(1M) 														   installboot(1M)

NAME
installboot - install bootblocks in a disk partition SYNOPSIS
installboot bootblk raw-disk-device The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition. The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be found using the -i option of uname(1). The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead. bootblk The name of the bootblock code. raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read- able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive. Example 1: Installing UFS Boot Block To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use: example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t0d0s0 /usr/platform/platform-name/lib/fs/ufs directory where ufs boot objects reside. /platform/platform-name/ufsboot second level program to boot from a disk or CD See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5) WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device. 11 Apr 2005 installboot(1M)
All times are GMT -4. The time now is 02:44 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy