05-15-2008
Thank you. It ejected with /0m and /0mn and /0mnb. But I have a bigger issue now.
please see new post forthcoming with respect to boot. Did I do something to cause
this issue?
Quote:
So lets see if it is 0mn then:
put a tape in the device and then
type
mt -t /dev/rmt/0mn offl
# It should eject the tape...
# tape devices are in /dev/rmt/
# 0m should be the first tape then 1m etc...
# 0mn : the n is for no rewind but mt command works only if norewind device...
If mt succeeded if putting the tape offline (ejected)
then you know what device to use: /dev/rmt/0m or 0mn
Is there a fbackup/frecover command on your station? (I deal with servers...)
You could try to use tar command
But most important since you OS is legacy I would check and see if make_recorevery is installed:
/opt/ignite/bin/make_recovery
If you have it do a make_recovery -Av
Last edited by davel1000; 05-15-2008 at 10:47 AM..
10 More Discussions You Might Find Interesting
1. Cybersecurity
does anyone know how I can make an automatic backup of files to a tape drive under UNIX. I have so many commands, I don't know which goes where. I have commands for the task scheduler, Cron and other unix commands. Please help. Very Urgent. Thanks (3 Replies)
Discussion started by: Cute
3 Replies
2. UNIX for Dummies Questions & Answers
Please help me!!!. I am new to Unix and I have to replace the tape backup drive. Originally the system had an IBM tape drive (Rhomat) that is damged. I changed it and installed a dat drive HP 5000+. The hardware recognize the drive, the diagnostics if OK. But when I try to install the operating... (3 Replies)
Discussion started by: allaite2
3 Replies
3. Solaris
I am currently using tar to backup a server that has 9gb of data.
This is fine and works fine, as part of this I send the backup to a remote tape on a remote server using rsh..
This is not very secure though is it?
Whats the best idea here - is there another way I should do this to be more... (1 Reply)
Discussion started by: frustrated1
1 Replies
4. Linux
All,
Has anybody ever got a Linux server to backup to a remote Solaris tape drive using the dump command and rsh? I can remtoely backup two Solaris server this way. Any help would be appreciated.
Thanks,
Mike (0 Replies)
Discussion started by: bubba112557
0 Replies
5. AIX
Currently I have a Dell Ultrium LTO 2 Tape Drive. I am going to have a IBM AIX server. Just wonder if it is possibe to connect this tape drive to the aix server? I have Brightstor Arcserver installed on another win 2003 server. Is it possible to install the arcserve agent on the aix and use the... (1 Reply)
Discussion started by: ming413
1 Replies
6. UNIX for Dummies Questions & Answers
Hi All,
I have an old Unix system used by a client as a backup server.I installed an Exabyte tape drive and on restarting the server and during POSTs, the system recognizes the tape drive with its scsi id. On running the command devstat -IAF, the system sees the tape drive quite well.
When... (1 Reply)
Discussion started by: ezleone
1 Replies
7. Solaris
Hi,
I want to take backup of files older than 20 days from a directory onto a tape drive on remote machine on Solaris.
The files are of format abc-20100301000000.gz on my local machine.
I know the below commands for searching files older than x days and command for backup procedure.
solar1 #... (7 Replies)
Discussion started by: jyothi_wipro
7 Replies
8. Solaris
Hello all,
I'm trying to backup some files on a solaris 10 machine to the remote tape drive connected to another solaris 10 machine.
I have set up rsh to allow for password-less connection between the servers, but I'm not able to write to the tape with the command:
root@sdp4a>tar cvf... (1 Reply)
Discussion started by: kerrygold
1 Replies
9. Solaris
hi friends, i am trying to patch a solaris 9 server. However i need to do a ufsdump backup before any patching. There is no hardware port for connecting the tape drive. Any other ways to do a ufsdump ? :wall: (2 Replies)
Discussion started by: Exposure
2 Replies
10. Solaris
Hi Guys,
I want to take backup of a ZFS file system on tape drive.
Can anybody help me with this?
Thanks,
Pras (0 Replies)
Discussion started by: prashant2507198
0 Replies
tz(4) Kernel Interfaces Manual tz(4)
Name
tz - SCSI magnetic tape interface
Syntax
VAX NCR 5380:
adapter uba0 at nexus?
controller scsi0 at uba0 csr 0x200c0080 vector szintr
tape tz0 at scsi0 drive 0
VAX DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC SII:
adapter ibus0 at nexus?
controller sii0 at ibus? vector sii_intr
tape tz0 at sii0 drive 0
RISC DEC KZQ:
adapter uba0 at nexus?
controller kzq0 at ibus? csr 0761300vector sii_intr
tape tz0 at kzq0 drive 0
RISC NCR ASC:
adapter ibus0 at nexus?
controller asc0 at ibus? vector ascintr
tape tz0 at asc0 drive 0
Description
The SCSI tape driver provides a standard tape drive interface as described in This is a driver for any Digital SCSI tape device.
For the TZK10 QIC format tape drive, the densities supported are QIC-24 (read only) block size of 512 byte blocks, QIC-120, and QIC-150
read/write block size of 512 byte blocks, and QIC-320 read/write block size of 1024 byte blocks. With QIC format style tapes all reads and
writes must be in multiple of the block size. This is a requirement of fixed block tape drives because record boundaries are not pre-
served. The QIC densities are selected using the following special device names:
QIC-24 Fixed block size.
QIC-120 Fixed block size.
QIC-150 Fixed block size.
QIC-320 Fixed block size.
With all fixed block tape devices a of a file to the tape must be padded out. An example of this is a of which has a size of approximately
3800 bytes.
dd if=/etc/gettytab of=/dev/rmt0h bs=10k conv=sync
or
dd if=/etc/gettytab of=/dev/rmt0l bs=512 conv=sync
The option of pads the output to block size.
This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape drives). See for further
details.
Tape Support
TZ30, TZK50, TLZ04, TSZ05, TKZ08, TZK10
Diagnostics
All diagnostic messages are sent to the error logger subsystem.
Files
See Also
mtio(4), nbuf(4), SCSI(4), MAKEDEV(8), uerf(8), tapex(8)
Guide to the Error Logger
tz(4)