You need to plumb your card first
ifconfig ce0 plumb
after, configure your ip address
ifconfig ce0 190.10.10.66/16 up
try to ping your ip from the same system
ping 190.10.10.66
and try to ping another system after.
Look if your have 2 nic on the system.
Thank you, but I did not ping to the other system.
This is the result from plumb: database is my host name
-----------------------
Quote:
Originally Posted by DukeNuke2
if you are on solaris 10 please post also the output of
dladm show-dev
and
dladm show-link
Thank you, I am using Solaris 10 on V890 Sparc, and the result from your command are:
The NIC I already use is ce0.
Thank again!
Last edited by trantuananh24hg; 03-20-2008 at 11:15 PM..
I modified the following mimesender script so I can send also to BCC adresses:
https://www.unix.com/showthread.php?t=17065
Everything is working and correct. Except the email address(es) in BCC are not delivered.
When I set the debug-mode ON I can see the BCC header and when I receive the... (1 Reply)
:) Firstly Hi all!!, im NEW!! and on here hoping that someone might be able to offer me some help... i have a server that keeps crashing every few days with the error message:
PANIC KERNAL-MODE ADDRESS FAULT ON USER ADDRESS 0X14
KERNAL PAGE FAULT FROM (CS:EIP)=(100:EF71B5BD)
EAX=EF822000... (10 Replies)
Am I missing something, or does RFC 3549 suggest that the NLM_F_REPLACE flag should apply to any netlink message header? In other words, routes/links/ipv6-lifetimes should not be the only things that can be affected by the flag.
The reason I ask is that it seems impossible (from looking at the... (0 Replies)
Hi there
I lost connectivity to one of our remote systems and when I checked the messages log I found the following:
Aug 10 23:42:34 host xntpd: time reset (step) 1.681729 s
Aug 16 13:20:51 host ip: WARNING: node "mac address" is using our IP address x.x.x.x on aggr1
Aug 16 13:20:51 host... (9 Replies)
Need to change sender email id from applmgr@<hostname>.<domain-name> to applmgr@domain-name.
Understand we can change in the sendmail.cf where $j is the hostname.domain-name.. can anyone show the exact value to change?
Thank you. (8 Replies)
I have been struggling with a script to automate some security related activities. I have it pretty much working, all except the search. I have an input file formatted as such:
216.234.246.158 216.234.246.158 ``
24.249.221.22 24.249.221.200 ``
24.249.226.0 ... (4 Replies)
It looks like if matching and deleting the last line confuses 'sed' so it does not recognize '$' address. Consider:
sed -e '/^3/d' -e '$ a text'
supposed to delete a line starting with '3' and then append 'text' after the last line of input. But, if it is the last line of input which starts... (2 Replies)
My company has an email user group email address name that has 35 characters in front of the @ symbol where two of them are dashes. For some reason the mail command fails to send email to this address when I invoke it from the Linux command line. I don't understand the reason for the failure. Below... (5 Replies)
I have a file "file1" that contains several ip address , and the "file2" contains several records , each line in file2 contains somewhere the ip address that i am searching in the file1
I use the unix command grep -w
for i in `cat file1`
do
grep -w "$i" file2 >> file3
done
... (9 Replies)
Discussion started by: knijjar
9 Replies
LEARN ABOUT SUNOS
sppptun
sppptun(1M) System Administration Commands sppptun(1M)NAME
sppptun - PPP tunneling driver utility
SYNOPSIS
sppptun plumb
sppptun plumb protocol device
sppptun unplumb interface
sppptun query
DESCRIPTION
The sppptun utility is used to configure and query the Solaris PPP tunneling device driver, /dev/sppptun. Currently, only PPP over Ether-
net (PPPoE) is supported, so the plumb and unplumb arguments are used to specify Ethernet interfaces that are to be used for PPPoE, and the
query option lists the plumbed interfaces.
The use of sppptun to add interfaces is similar to the use of ifconfig(1M) to add interfaces to IP. The plumbing is done once for each
interface, preferably at system start-up time, and is not normally manipulated on a running system. If multiple instances of PPP are run
over a single interface, they share the plumbing to that interface. Plumbing for each session is not required (and not possible for PPPoE).
The proper way to plumb interfaces for PPPoE is to list the interfaces, one per line, in the /etc/ppp/pppoe.if file.
USAGE
sppptun plumb
When specified with no additional arguments, the plumb argument lists the protocols that are supported by the utility. These are the
strings that are used as the protocol argument below.
sppptun plumb protocol device
This plumbs a new interface into the driver. The protocol parameter is pppoe for the PPP-carrying "Session Stage" connection or pppoed
for the PPPoE "Discovery Stage" connection. Both connections must be present for each Ethernet interface that is to be used for PPPoE.
The device parameter is the path name of the Ethernet interface to use (use ifconfig(1M) to list available devices). If the path begins
with /dev/, then this portion may be omitted.
sppptun unplumb interface
This removes an existing interface from the driver and terminates any PPP sessions that were using the interface. The interface parame-
ter is the name of the interface as reported when the interface was plumbed.
sppptun query
Displays the canonical names of all interfaces plumbed into the /dev/sppptun device driver.
EXAMPLES
Example 1: Setting up to Use PPPoE on hme0
Plumb the hme0 interface.
# sppptun plumb pppoed hme0
hme0:pppoed
# sppptun plumb pppoe hme0
hme0:pppoe
Remove the hme0 interface.
# sppptun unplumb hme0:pppoed
# sppptun unplumb hme0:pppoe
Example 2: Script to Remove All Plumbed Interfaces
#!/bin/sh
for intf in `sppptun query`
do
sppptun unplumb $intf
done
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 One or more errors occurred.
FILES
/etc/ppp/pppoe.if list of Ethernet interfaces to be plumbed at boot time
/usr/sbin/sppptun executable command
/dev/sppptun Solaris PPP tunneling device driver
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpppdt |
+-----------------------------+-----------------------------+
SEE ALSO pppd(1M), pppoec(1M), pppoed(1M), sppptun(7M)
RFC 2516, Method for Transmitting PPP Over Ethernet (PPPoE), Mamakos et al, February 1999
SunOS 5.10 19 Mar 2001 sppptun(1M)