Hard disk replacement Post: 302175259

9 More Discussions You Might Find Interesting

1. Solaris

Disk replacement with svm

I dont even know what raid level this is, but its raid 5 mirrored from the looks of it. I have a failed disk (t12) within this mirror. What is the best way to replace this disk? 2 things concern me, isn't there a command to prepare the disk for a hot swap? and what should i do with the...

2. Solaris

Disk Replacement SVM

Hello, Can someone advise the proper procedure for replacing a mirrored disk in SVM. I have checked the docs and various websites but the procedure seems to vary. This is what I would do... 1. Remove the db replicas from the bad disk. 2. Detach it from the mirror 3. Clear it with...

3. SCO

declare disk driver for IDE hard disk

hi I've a fresh installation of SCO 5.0.7 on the IDE hard disk. For SCSI hard disk I can declare, for example blc disk driver using: # mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk?

4. Linux

C++ Code to Access Linux Hard Disk Sectors (with a LoopBack Virtual Hard Disk)

Hi all, I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it...

5. Solaris

Sun Ultra 2 Hard Drive Replacement

Hi all...I have an old Sun Ultra 2 running SunOS 5.7 (I know old). These machines have 2 hard drives and one of my drives fried. I bought some replacement drives and wanted to a simple "dd" command from my one good drive to copy all to the new replacement drive. The new drives however give me a...

6. Solaris

encapsulated root disk replacement

Hello, I have a Sparc system with encapsulated disks. Because of disk errors I had to replace rootdisk, I did it with vxdiskadm 4) replacement, vxdctl disable/enable, vxdiskadm 5) After it it the system boot failed, dropped back to the ok> prompt, message was: The file...

7. AIX

Disk replacement on SharedVG.

Hi, One of my disk is in 'disk missing state'. It is a sharedVG and cluster nodes. The errpt keeps reporting stale partition error. lvs are in open/stale state. In this sceanario is replacing the disk the best practice? When i do a lsdev the disk is labelled as below. hdisk3 Available ...

8. Filesystems, Disks and Memory

DISK ARRAY PROTECTION SUSPENDED message displayed following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ...

9. AIX

DISK ARRAY PROTECTION SUSPENDED message following disk replacement

LEARN ABOUT DEBIAN

jazipconfig

JAZIPCONFIG(8)						      System Manager's Manual						    JAZIPCONFIG(8)

NAME

       jazipconfig - jazip(1) configuration tool.

SYNOPSIS

       jazipconfig [--non-interactive]

DESCRIPTION

       The jazipconfig script is a tool to easily build the /etc/jazip.conf file for the configuration of jazip(1)

OPTIONS

       The  optional  --non-interactive  command  line	parameter  instructs jazipconfig to do what it can to build a /etc/jazip.conf file without
       prompting the user.  On Debian systems, the command is invoked this way by the jazip package post-installation script.

       In this non-interactive mode, the script looks through /proc/scsi/scsi for detected Zip or Jaz devices.	 If  it  find  any,  it  looks	up
       /etc/fstab to see if it can find already specified mount points for them.  If (and only if) it finds mount points, it writes the device and
       mount point to /etc/jazip.conf

INTERACTIVE USE

       If no command line options are provided, jazipconfig runs interactively.  In this case, it also looks through /proc/scsi/scsi for  detected
       Zip or Jaz devices.  If it find any, it looks up /etc/fstab to see if it can find already specified mount points for them.  Then it creates
       a user menu which you can use to create the /etc/jazip.conf file.

NOTES

       The first entry listed in /etc/jazip.conf is the default device used when jazip is called without an argument.

SEE ALSO

       jazip(1), jazip.conf(5)

AUTHOR

       Copyright (c) 1999  Peter S Galbraith <psg@debian.org>

       This manual page by Peter S Galbraith <psg@debian.org> for the Debian GNU/Linux system (but may be used by others).

																    JAZIPCONFIG(8)