02-27-2008
#cat /etc/vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c0d0s3 - - swap - no -
/dev/dsk/c0d0s0 /dev/rdsk/c0d0s0 / ufs 1 no -
/dev/dsk/c0d0s6 /dev/rdsk/c0d0s6 /usr ufs 1 no -
/dev/dsk/c0d0s1 /dev/rdsk/c0d0s1 /var ufs 1 no -
/dev/dsk/c0d0p0:boot - /boot pcfs - no -
/devices - /devices devfs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
swap - /tmp tmpfs - yes -
/dev/dsk/c0d0s4 /dev/rdsk/c0d0s4 /slice4 ufs 2 no -
#df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c0d0s0 306M 162M 113M 59% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 599M 580K 598M 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/dev/dsk/c0d0s6 4.6G 2.1G 2.5G 46% /usr
/dev/dsk/c0d0p0:boot 10M 1.5M 8.8M 15% /boot
/usr/lib/libc/libc_hwcap1.so.1
4.6G 2.1G 2.5G 46% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c0d0s1 167M 79M 71M 53% /var
swap 599M 308K 598M 1% /tmp
swap 598M 24K 598M 1% /var/run
#mount
/ on /dev/dsk/c0d0s0 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1980000 on Wed Feb 27 14:46:03 2008
/devices on /devices read/write/setuid/devices/dev=4380000 on Wed Feb 27 14:45:20 2008
/system/contract on ctfs read/write/setuid/devices/dev=43c0001 on Wed Feb 27 14:45:20 2008
/proc on proc read/write/setuid/devices/dev=4400000 on Wed Feb 27 14:45:20 2008
/etc/mnttab on mnttab read/write/setuid/devices/dev=4440001 on Wed Feb 27 14:45:20 2008
/etc/svc/volatile on swap read/write/setuid/devices/xattr/dev=4480001 on Wed Feb 27 14:45:20 2008
/system/object on objfs read/write/setuid/devices/dev=44c0001 on Wed Feb 27 14:45:20 2008
/usr on /dev/dsk/c0d0s6 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1980006 on Wed Feb 27 14:46:06 2008
/boot on /dev/dsk/c0d0p0:boot read/write/setuid/devices/nohidden/nofoldcase/dev=19a3010 on Wed Feb 27 14:45:45 2008
/lib/libc.so.1 on /usr/lib/libc/libc_hwcap1.so.1 read/write/setuid/devices/dev=1980006 on Wed Feb 27 14:45:52 2008
/dev/fd on fd read/write/setuid/devices/dev=4680001 on Wed Feb 27 14:46:06 2008
/var on /dev/dsk/c0d0s1 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1980001 on Wed Feb 27 14:46:20 2008
/tmp on swap read/write/setuid/devices/xattr/dev=4480002 on Wed Feb 27 14:46:20 2008
/var/run on swap read/write/setuid/devices/xattr/dev=4480003 on Wed Feb 27 14:46:20 2008
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Hi,
I'd like to add two new disk (mirrored each other) in a machine still on line.
The machine is mirrored with SDS. the idea is to add two new disk and mirroring them in order to add a new mount point like "/produit" with only half of the new disk.
who could send me exemples or tell me how to... (1 Reply)
Discussion started by: guillaume35
1 Replies
2. UNIX for Advanced & Expert Users
Can any one Explain the artichture of Slice on SOLARIS PLATFORM.
OR else
where can i found artical on these topic.
akram shaik OCA
akram_tri_a@yahoo.com (2 Replies)
Discussion started by: smdakram
2 Replies
3. Solaris
Hi there
I am about to mirror a Solaris 10 x86 box (SunFire X4100) onto a secondary disk using svm (current system is one disk). My question is this, on X86 boxes there is a slice 8 defined as boot partition (and also a slice 9, dunno what its used for tho). Do I need to mirror this boot slice... (0 Replies)
Discussion started by: hcclnoodles
0 Replies
4. Solaris
First I have to admit that I am not an unix expert, but I do know some basic things about the file systems.
Anywho, one of my users' File Manager is not showing up as it normally does upon login. When I run a "ps -ea" I see "dtfile" in the list, but it does not show up. It's not in any of the... (0 Replies)
Discussion started by: tdpearson
0 Replies
5. UNIX for Dummies Questions & Answers
I hope this question isn't too vague...
i recently switched from RedHat to Solaris 10, and found that the parts of a script that copy files between directories no longer work because escape sequences are appearing at the start and end of the filenames being read
#!/usr/bin/bash
cd... (1 Reply)
Discussion started by: jwm-wm
1 Replies
6. Shell Programming and Scripting
Is there a way in a shell script to make an user input appears as * (like a password) ?? (2 Replies)
Discussion started by: ce9888
2 Replies
7. Shell Programming and Scripting
I am having trouble finding the process, or subsystem, sendmail running on our client's server. They are runnning AIX version 5.3.9.0. When I run "ps -ef | grep sendmail" I only get my current ps process as a match. Running "ps -ef | more" and wading through the results also does not show sendmail... (2 Replies)
Discussion started by: moviedude
2 Replies
8. AIX
Hi everyone,
this strange error suddenly popped up out of no where
when I do a directory listing , the date part doesn't appear
root@oradb:/backup>ls -la
total 58069304
drwxr-xr-x 3 root system 4096 23 ▒▒▒ 21:56 .
drwxr-xr-x 44 root system 1536 23 ▒▒▒ 21:47... (4 Replies)
Discussion started by: filosophizer
4 Replies
9. Linux
hi i know this is irrelevant to the question above but i was wondering how to pt a restriction in the filename in linux. I want that it is impossible to add numbers into the filename, help will be rely great , thanx!
This posting was initially given as a reply to an unrelated thread. It has been... (2 Replies)
Discussion started by: samirboss
2 Replies
10. UNIX for Advanced & Expert Users
Gurus
I am running an AIX 7.1 system and have come across a strange issue.
I am trying to delete files from a folder using standard 'rm' syntax. After i delete the files , files re-appear again.
File renaming or editing does not help. Files re-appear with 0 bytes again. They are always 0... (5 Replies)
Discussion started by: abhijeet
5 Replies
pcata(7D) pcata(7D)
NAME
pcata - PCMCIA ATA card device driver
SYNOPSIS
pcata@socket#:a -u
pcata@socket#:a -u,raw
The PCMCIA ATA card device driver supports PCMCIA ATA disk and flash cards that follow the following standards:
o PC card 2.01 compliance (MBR+fdisk table required for all platforms).
o PC card ATA 2.01 compliance.
o PC card services 2.1 compliance.
The driver supports standard PCMCIA ATA cards that contain a Card Information Structure (CIS). For PCMCIA, nodes are created in /devices
that include the socket number as one component of the device name referred to by the node. However, the names in /dev, /dev/dsk, and
/dev/rdsk follow the current conventions for ATA devices, which do not encode the socket number in any part of the name. For example, you
may have the following:
+------------------------+---------------------------+---------------------+
| Platform | | |
+------------------------+---------------------------+---------------------+
|/devices name | | |
+------------------------+---------------------------+---------------------+
+------------------------+-/dev/dsk-name-------------+---------------------+
|/devices/isa/pcic@1,3e0 | | |
+------------------------+---------------------------+---------------------+
|/disk@0:a | | |
+------------------------+---------------------------+---------------------+
+------------------------+-/devices/iommu@f,e0000000-/sbus@f,e0001000-/SUNW, pcmcia@3,0 /disk@0:a
|SPARC | | /dev/dsk/c1d0s0 |
| | | |
| | | |
+------------------------+---------------------------+---------------------+
PRECONFIGURATION
If a PC Card ATA device is recognized, the pcata driver is automatically loaded, IRQs allocated, devices nodes created, and special files
created (if they do not already exist).
Known Problems and Limitations
o vold does not support pcata. File systems must be mounted manually.
o You need to umount the file system before removing the disk.
o The ufs file systems on removable media (PC Card ATA) should have one of the onerror={panic, lock, umount} mount options set.
CONFIGURATION
Configuration topics include initial installation and configuration, identifying an unrecognized device, special files and hot-plugging.
Initial Installation and Configuration
1. Install the Solaris software.
2. Boot the system.
3. Insert the PC card ATA device.
Identifying an Unrecognized Device
If you insert a PC card ATA device and it is not recognized (no special files created), use the prtconf command to identify the problem.
1. Run the prtconf -D command to see if your pcata card is recognized. (A recognized device will appear at the end of the prtconf output.
For example:
# prtconf -D
. . .
pcic, instance #0 (driver name: pcic)
. . .
disk, instance #0
2. If pcata does not appear in the prtconf output, there is a problem with the PC card adapter configuration or with the hardware. Check
to see whether the problem is with the card or the adapter by trying to use the card on another machine and by seeing if it works on
the same machine using DOS.
Special Files
For PC card devices, nodes are created in /devices that include the socket number as one component of a device name that the node refers
to. However, the /prtc/dev names and the names in /dev/dsk and /dev/rdsk do follow the current convention for ATA devices, which do not
encode the socket number in any part of the name.
Hot-Plugging
o If you want to remove the disk, you must unmount the file system.
o Use the mkfs_pcfs(1M) command to create a pcfs file system:
# mkfs -F pcfs /dev/rdsk/c#d#p0:d
o To mount a pcfs file system, type:
# mount -F pcfs /dev/dsk/c#d#p0:c /mnt
o If you want to create a ufs file system, use the newfs command and type:
# newfs /dev/rdsk/c#d#s#
o To mount a ufs file system, type:
# mount -F ufs /dev/dsk/c#d#s# /mnt
o To create a Solaris partition, run the format command and go to the Partition menu. For more information, see the format(1M) man page.
/kernel/drv/pcata pcata driver
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE |
+-----------------------------+-----------------------------+
|VALUE | |
+-----------------------------+-----------------------------+
|Availability |SUNWpsdpr |
+-----------------------------+-----------------------------+
format(1M), mount(1M), newfs(1M), pcmcia(7D), attributes(5), pcfs(7FS)
20 Oct 2000 pcata(7D)