I have never heard about a "vxfs" filesystem. In AIX JFS (journaling file system) and its successor JFS2 are common.
The "containers" as you have called them are integrated parts of AIX. Without having created a volume group or having added your disk to an existing one you will not even be able to use it, so perhaps your filesystem (if you created any) is now on some other disk.
For short: your problem can easily be corrected by editing the file /etc/filesystems and add the line
To the filesystems stanza. Assuming your filesystem is mounted on /path/to/fs this would look similar to that (the line to insert/change is marked bold):
Right now I'm a bit short on time, but as i see much confusion over this issue now and again i will write a detailed explanation of the LVMs workings over the next few days. Until then you might read some information about the LVM (Logical Volume Manageer) on the IBM Website (the link to the redbook site is pinned in the links section this forum) and read the following (part-)explanations i have written in answering one or the other question.
I'm currently running dual boot Linux & Windows. Linux is Fedora core 3. I've downloaded and installed the rmp that was needed so that I could mount a NTFS filesystem. But when I go to mount the filesystem I'm still getting error's stating it does not support the NTFS filesystem.
Also the... (9 Replies)
Hi all,
I have a question regarding filesystem mounting.
I have one Sun box(V240) and a NAS on a network. Sun machine shows the following output of df -k command.
# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/md/dsk/d0 11094316 8509226 2474147 78% ... (2 Replies)
Hello,
In a shared storage environment is their anything to stop being able to mount the same filesystem on two hosts by accident, a flag being set or something on the storage?
If it did happen would one of the hosts panic? (2 Replies)
Hi techies,
I am pretty new to Solaris. So the qstn might be a silly one.
I had a local disk with Solaris installed.
I have done ufsdump to a SAN disk and after that s3 and s7 slices are giving the following error : "UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY."
I had the following... (4 Replies)
Could anyone help me please as I am stuck up.
I want to mount /home/dun/maitree location of server A in server B to location /home/dun/tibco .Both server A and server B are Linux machine .The problem is that /home/dun/tibco of server B has some files and directory in it so after doing this... (1 Reply)
Hi friends,,,
I am running one server on Ubuntu 12.04 LTS 32-bit, some times my pc restarts automatically, with no reason, I have a script to start server which requires root password. in this directory
/myserver/start_server.sh
How can I do this ?
and some scripts I am having that I... (1 Reply)
Hi Team
I am facing an issue on solaris machine as mounting a remote path is only done after reboot the machine. without rebooting its going to hanging state and no process either.
i am using the following parameters for mounting NFS share..
mount -F nfs remote_path:/abc/ mount_point... (1 Reply)
Hi All,
I was trying to know more about RAM disk concept in AIX. I found something on IBM site.
I was able to create and use/delete RAM disk as per IBM instructions.
But as you guys know, this RAM disk is a temporary storage. (*when ever we reboot the AIX LPAR, content/RAM disk will be... (4 Replies)
Hi All,
Recently I came to know my / root file system is getting full because of application directory /siebel/
I have one option.
1) Down the application , take full backup
2)change the filesystem ownership
2)copy the contents into that filesystem
cp -pr /siebel/* /siebelfs/*
3)Inform... (9 Replies)
Discussion started by: Thala
9 Replies
LEARN ABOUT OSX
quotacheck
QUOTACHECK(8) BSD System Manager's Manual QUOTACHECK(8)NAME
quotacheck -- filesystem quota consistency checker
SYNOPSIS
quotacheck [-g] [-u] [-v] filesystem ...
quotacheck [-g] [-u] [-v] -a
DESCRIPTION
Quotacheck examines each filesystem, builds a table of current disk usage, and compares this table against that recorded in the disk quota
file for the filesystem. If any inconsistencies are detected, both the quota file and the current system copy of the incorrect quotas are
updated (the latter only occurs if an active filesystem is checked). By default both user and group quotas are checked.
Available options:
-a If the -a flag is supplied in place of any filesystem names, quotacheck will check all the read-write filesystems with an existing
mount option file at its root. The mount option file specifies the types of quotas that are to be checked.
-g Only group quotas are checked. The mount option file, .quota.ops.group, must exist at the root of the filesystem.
-u Only user quotas are checked. The mount option file, .quota.ops.user, must exist at the root of the filesystem.
-v quotacheck reports discrepancies between the calculated and recorded disk quotas.
Specifying both -g and -u is equivalent to the default. Parallel passes are run on the filesystems required, in an identical fashion to
fsck(8).
Normally quotacheck operates silently.
Quotacheck expects each filesystem being checked to have quota data files named .quota.user and/or .quota.group located at the filesystem
root. If a binary data file is not present, quotacheck will create it. The default filename and root location cannot be overridden.
Quotacheck is normally run at fsck time.
Quotacheck accesses the raw device in calculating the actual disk usage for each user. Thus, the filesystems checked should be quiescent
while quotacheck is running.
FILES
Each of the following quota files is located at the root of the mounted filesystem. The mount option files are empty files whose existence
indicates that quotas are to be enabled for that filesystem. The binary data files will be created by quotacheck, if they don't already
exist.
.quota.user data file containing user quotas
.quota.group data file containing group quotas
.quota.ops.user mount option file used to enable user quotas
.quota.ops.group mount option file used to enable group quotas
SEE ALSO quota(1), quotactl(2), edquota(8), fsck(8), quotaon(8), repquota(8)HISTORY
The quotacheck command appeared in 4.2BSD.
4.2 Berkeley Distribution October 17, 2002 4.2 Berkeley Distribution