02-25-2008
Normally when getting the Timeout waiting for ARP/RARP packet the error is due to one of the following:
(information found on
examcram2 - Solaris 9 Network Admin Exam Cram: ARP and RARP
Quote:
The ethernet address for the client has been entered incorrectly in /etc/ethers.
*
The ethernet address entry for the client does not exist in /etc/ethers.
*
The IP address or hostname entry for the client has been entered incorrectly in /etc/inet/hosts.
*
The IP address or hostname entry for the client does not exist in /etc/inet/hosts.
*
The in.rarpd daemon is not running on the server.
You can also gain useful information from the debug option of in.rarpd because it can be used to eliminate some of the potential causes of problems.
Here are some other docs that
may help:
Jumpstart how-to Solaris 8
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
we have a problem with a server UNIX SUN OS 5.7 :
we tried to reboot it and we have the following error message :
"boot load failed
the file just loaded does not appear to be executable "
we booted the server in single user mode with the cdrom
we made the mirrored disk bootable
we tried... (2 Replies)
Discussion started by: farzolito
2 Replies
2. Solaris
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
Discussion started by: johncy_j
0 Replies
3. Solaris
Hi everyone,
I have sun fire280R machine before i it is installed with solaris5.9 now i want to upgrade it but it not booting from the cd rom ....OK prompt also not comming i dont have solaris keyboard to press stop-A key...i have a intel supported keyboard ...what may be the problem it is... (1 Reply)
Discussion started by: alakshmanrao
1 Replies
4. Shell Programming and Scripting
#!/usr/bin/perl
use strict;
use warnings;
use Net::Telnet ();
my $t = new Net::Telnet (Timeout => 10,
Prompt => '/.*(#|>|\))\s*$/');
my $remote_host='home';
$t->open(Host => $remote_host, Port =>23);
$t->login('root', 'pass');
the error that I get... (4 Replies)
Discussion started by: lassimanji
4 Replies
5. Shell Programming and Scripting
I am having an issue while trying to run the Net::SFTP module. I have been able to install this on several machines before but have never had this problem. When I am running a simple script to test the sftp it dies but does not trigger the print statement for my error. The last line is in red.
... (0 Replies)
Discussion started by: kofs79
0 Replies
6. Solaris
Hi everybody, I'm running soalris 10, and I would like to know if it posible to boot on single user mode(init s), and then set up (may be manually or not) all the networks services, did someone try this before??
Tks (4 Replies)
Discussion started by: jespada
4 Replies
7. Solaris
People i install a solaris 9 in a sparc platform this is the 3 time that i install it on this machine, the problem now is that when i do a ifconfig -a i only see the loop conection and no the hme0, i don`t remember if during the installation i set the option not networked.
Any ideas? how to... (6 Replies)
Discussion started by: enkei17
6 Replies
8. Shell Programming and Scripting
I am facing some problem in the NET::FTP Library in perl script in the HPUX. I am using NET::FTP to ftp files from 23 remote servers. Except 1 server everything is working fine. I am getting this error from one server . but normal FTP is working fine for that server. everytime few files are ftped... (1 Reply)
Discussion started by: mohanm
1 Replies
9. Solaris
Good evening all,I'm new to your site, so please bear any infringements or transgressions on my part.I'm new to the whole Solaris boot install over the net scenario, but here's where I'm stuck:I have an M5000 with 2 domains (running unimode). Domain 0 is configured and running Solaris 10. Domain 1... (9 Replies)
Discussion started by: RandomSun
9 Replies
10. Solaris
I have a blade 6000 chassis with a T6340 blade. The blade took a dump and I am trying to rebuild it with a Flash Archive. I am using net boot from an E2900 and the flash is located on a an array that is attached to my v245 management server. I can net boot and I can select flash install. When I put... (1 Reply)
Discussion started by: ryan_ford
1 Replies
RARPD(8) System Manager's Manual RARPD(8)
NAME
rarpd - reverse address resolution protocol daemon
SYNOPSIS
rarpd [-v] [-i interface ]
DESCRIPTION
Rarpd listens on the ethernet for broadcast packets asking for reverse address resolution. These packets are sent by hosts at boot time to
find out their IP address. Rarpd looks up the six octet ethernet number in the ethers map finding a host name. This name is translated to
the IP address of the host by a DNS lookup. The IP address is then sent to the host.
Before rarpd can start its service it first finds out what the IP address and hardware address of the ethernet is.
Warning! Sun diskless workstations assume that the first RARP server that answers is the host they are to boot from. For this to work all
other Sun RARP servers delay their answer if they are not also the requestors boot server. This rarpd does not have this kludge so it will
happily engage the Sun boot server to see who can answer the client first. Unless your host can actually serve a Sun diskless client, it
is better not to list any more hosts in the ethers file than necessary.
OPTIONS
-v Be verbose. Show requests which the daemon is responding to.
-i Bind to the named interface. By default rarpd binds to the default interface for the local system type, if available.
SEE ALSO
ifconfig(8), ethers(5), hosts(5),
AUTHOR
Derrick J. Brashear (shadow@dementia.org)
The man page is mostly from the Minix version, by Kees J. Bot (kjb@cs.vu.nl)
RARPD(8)