How to copy a tape into another tape ? Post: 302161012

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

copy to tape notworking

I am copying a file to tape but it keeps failing, can any body help? I tried the tar,cp, mv commands and not seems to be working #!/bin/ksh # # Return Codes # 0 - success # 1 - failure # # # dat=`date +%y%m%d` cp /u07/work/theo_test.log /dev/rmt0/exp_dump.${dat}.$$ if (( ${?}...

2. Shell Programming and Scripting

another copy to tape question

I have a file called feed_file. Every week, I would like to copy this file to tape. I would not like the file on this tape to be over written with the previous weeks file. So what I would prefer to do is to add time stamp at the end of each weeks file on the tape in order for the files to look...

3. Solaris

copy tape to tape using dd

I have two tape drives attached to my system , and i am trying to copy one tape to another using both tape drives and using the following command : dd if=/dev/rmt/1 of=/dev/rmt/2 but unfortunitly i am getting the following error : read: Not enough space 0+0 records in 0+0 records...

4. Solaris

Copy tape ?????????????

how i can copy entire content of a tape to HD ? the tape content a tar file i want to copy it onto hard disk and after do the untar ... The block size of the tar file is 1024 ..... wich command i must type ??? thank in advance ........ The operating system is sun ....

5. UNIX for Advanced & Expert Users

Space free on tape /delete a single file on tape

Hi, I' using a sun solaris server, I would like to known if there is the possibility to control how many space is free on a tape and how I can delete a single file on a tape. Thanks DOMENICO

6. Solaris

Copy Tape Drive DDS-01.

Hello, I am trying to copy a boot tape DDS-01 with miniroot, but i don�t get this copy. i have already used the command dd, but don�t work. There are other way to get it.

7. UNIX for Dummies Questions & Answers

Mounting DLT tape and to backup file to tape

Hi there: I'm new here Can anyone help me: I have DS15 Alpha server : Unix 5.1B Now i need to connect a DLVT VS80 1U Rackmount Tape Drive unit. What is the exact comman to mount the DLTape IV?? How do i make backuo @ copy file to the tape? Thanx to all

8. SCO

Tape Status shows 2 Hard errors and 5 Underruns on new tape

when I do a tape status /dev/rStp0 I get the following on a new tape and I have tried several: Status : ready beginning-of-tape soft errors : 0 hard errors: 2 underruns: 5 My BackupEdge has stopped backing up my system because it asks for a new volume yet my total system data is under 20...

9. AIX

How to make a copy of a tape to another tape?

Hello, We need to make a copy of a backup tape, using the 2 tape recorders in IBM 3582 Tape Library We tried tu use "tcopy", it seems to work fine (no error messages) but we aren't sure if we can rely on it. my question is how to check if the copy succeded or not, but i also want to know...

10. AIX

Ejecting tape on AIX & Some Tape commands

I am trying to use this command to eject the tape mt -f /dev/rmt/0 unload but it gives me error mt -f /dev/rmt/0 unload mt: 0511-575 unload is not a recognized subcommand. Usage: mt Subcommand Valid subcommands are: weof eof fsf bsf ...

LEARN ABOUT REDHAT

amverify

AMVERIFY(8)						      System Manager's Manual						       AMVERIFY(8)

NAME

       amverify - check an Amanda tape for errors

SYNOPSIS

       amverify config [ slot [ runtapes ] ]

DESCRIPTION

       Amverify  reads	an  Amanda  format  tape  and makes sure each backup image can be processed by amrestore and, if possible, the appropriate
       restore program (e.g. tar).

       Amverify runs amrestore on each file of the tape and pipes the output to a restore program (if available) with an option to create a  cata-
       logue of the backup.  The catalogue itself is discarded.  Only the success or failure of the operation itself is reported.

       If  the	backup image cannot be processed by the restore program, e.g. if it was written on a different operating system, the image is sent
       through dd to /dev/null.  This still determines if the tape is readable, but does not do any internal consistency check on the image.

       If config is set up to use a tape changer, the slot argument may be used to choose the first tape to process.  Otherwise, the current  slot
       is used.

       The runtapes configuration parameter determines how many tapes are processed unless it is specified on the command line.

       See the amanda(8) man page for more details about Amanda.

AUTHOR

       Axel Zinser <fifi@icem.de>

SEE ALSO

       amrestore(8), amanda(8), amverifyrun(8)

																       AMVERIFY(8)