Sponsored Content
Special Forums IP Networking Able to ping server's private network Post 302157376 by *Jess* on Thursday 10th of January 2008 07:35:04 PM
Old 01-10-2008
Thanks for a reply!

I just found out the reason y we are able to ping the private network from our local workstation.

I did a tracert on the command prompt:

[ISS] C:\>tracert 192.168.2.1

Tracing route to 192.168.2.1 over a maximum of 30 hops

1 <1 ms <1 ms <1 ms 172.16.101.254 <- PC gateway
2 <1 ms <1 ms <1 ms 172.16.102.200
3 <1 ms <1 ms <1 ms 192.168.2.1 <- private ip

After disable the private network on 172.16.102.200,

[ISS] C:\>tracert 192.168.2.1

Tracing route to 192.168.2.1 over a maximum of 30 hops

1 <1 ms <1 ms 1 ms 172.16.101.254
2 172.16.102.200 reports: Destination host unreachable.


Not sure why the tracert pass through 172.16.102.200. Any ideas?
 

7 More Discussions You Might Find Interesting

1. IP Networking

private network to private network gateway

i have one private network with one ip address, and i have a seperate network on a seperate ip address. now, each network is behind a firewall/router. now what i want to do is be able to access one server on the second network from a computer on the first., but with the private ip address, (this... (2 Replies)
Discussion started by: norsk hedensk
2 Replies

2. IP Networking

Private network

Hi all, Currently we are in the progress of setting up a private network on all of our Sun Solaris servers. Purpose is to move all backup tasks to the private, hence reduce load on public network. Some of our servers only consists of 1 network card but with several ports. Shall we purchase... (10 Replies)
Discussion started by: *Jess*
10 Replies

3. UNIX for Dummies Questions & Answers

Need help setting up a home solaris private network

Hi all, I just purchased 2 Ultra 10 servers and I want to practice with home networking. I want to create a private network where I can connect both boxes to the internet via broadband using my four port adsl modem/router. My ISP assigns me 192.168 addresses via DHCP and I use the ISP's DNS but... (1 Reply)
Discussion started by: Kongowea
1 Replies

4. IP Networking

ping to different network in linux

Hi all, please help solving my small issue below is the configuration I have 3 systems sytem1 -------- system 2 ----------system 3 system 1 : 10.255.1.4 & default gw 10.255.1.55 system2 : ip 1 : 10.255.1.55 , ip 2: 10.255.2.1 system 3 : ip : 10.255.2.3 on system 2 : ... (4 Replies)
Discussion started by: Gopi Krishna P
4 Replies

5. IP Networking

How does a router directs the internet traffic to a specific host in the private network?

how does a router directs the internet traffic to a specific host in the private network? Example: My PC has ip 192.168.134.100 Router has ip 192.168.134.200 My company's ip 202.52.150.33 When i try to access internet, say google, it traverses from... (1 Reply)
Discussion started by: Arun_Linux
1 Replies

6. Windows & DOS: Issues & Discussions

Private Network

Hello, I have a desktop which has two network cards installed on it and I connected these two card through a hub. On the desktop in have installed a Windows Vista Home Edition SO and a Windowx XP SO in a virtual way. I also had intalled a Virtual BOX software and Windows XP run through it. By... (1 Reply)
Discussion started by: zendcool
1 Replies

7. AIX

Able to ping the server but not able to login through putty it says network timeout

Able to ping the server but not able to login through putty it says network timeout Please assist (3 Replies)
Discussion started by: Vishal_dba
3 Replies
prtdscp(1M)						  System Administration Commands					       prtdscp(1M)

NAME
prtdscp - display DSCP IP addresses SYNOPSIS
prtdscp [-v ] prtdscp [-v ] -h prtdscp [-v ] -d prtdscp [-v ] -s DESCRIPTION
prtdscp displays the IP addresses associated with a Domain to Service Processor Communications Protocol (DSCP) link. If no arguments are specified, prtdscp displays the IP addresses on both ends of the DSCP link. The IP address of either the Service Processor or domain side can be displayed separately by the use of the -s or -d options, respectively. OPTIONS
The following options are supported: -v Verbose mode. Print additional details about the program's internal progress to stderr. -h Help. Print a brief synopsis of the program's usage and exit. All other command line arguments are ignored. -d Display only the local domain's IP address. -s Display only the remote Service Processor's IP address. EXAMPLES
Example 1 Displaying both addresses The following example displays both the local domain's IP address and the remote SP's IP address: # prtdscp Domain Address: 192.168.103.2 SP Address: 192.168.103.1 Example 2 Displaying the local IP address The following example displays the local domain's IP address: # prtdscp -d 192.168.103.2 Example 3 Displaying the remote IP address The following example display the remote SP's IP address: # prtdscp -s 192.168.103.1 ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWdscpr.u, SUNWdscpu.u | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ SEE ALSO
attributes(5) SunOS 5.11 25 Apr 2006 prtdscp(1M)
All times are GMT -4. The time now is 03:53 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy