01-06-2008
Console problem
Dear gentlemen
I faced one problem when i made shutdown to my server AIX pserise/6000
the problem is the console (my console is outside not inside the server) corrupted during shutdown and restart so in this case I have to reinstall the linux in the console to allow me manage LPARS in the server but the main problem here I don't have a backup from the configuration for both server and console How can I solve this?
10 More Discussions You Might Find Interesting
1. Programming
Does UNIX have a header file that provide the same functions as "conio.h" in Turbo C of DOS?
In Turbo C of DOS, "conio.h" provide some special console IO funtions, for example, change the text color, print out a text with a specific co-ordinate, etc ...
With these special functions, I can... (1 Reply)
Discussion started by: MacMonster
1 Replies
2. SCO
I am running sco 5.06 open server
We have encountered the problem while login into the live Online server. After putting the usr as root, the system is taking time(20 Sec) to show me ‘Password:'. Sometimes the system shows login time out. Again sometimes the system is showing password:, after... (3 Replies)
Discussion started by: rahmanm
3 Replies
3. IP Networking
:( hi all ,
i have installed netscape console on my local pc to connect to webmail server using LDAP .
when i try to login from my console i get an error
"Http Exception:
Response: Http/1.1 500 Server Error Status 500"
i was told that i need to add my IP to the local.conf file. ... (1 Reply)
Discussion started by: ppass
1 Replies
4. UNIX for Advanced & Expert Users
hello,
I am using fedora core 6.
and there is Xen Virtual Console installed in my system ....due to which I am not able to use my serial ports.......
What is thi Xen virtual console and what it does?????
So, Can I unintall this Xen virtual Console.....
or any method so that I can use my... (3 Replies)
Discussion started by: arunchaudhary19
3 Replies
5. Solaris
Hi,
I have solaris 10 installed on my computer and when try to login in console mode, it would give output something like this.
login:root
Password:
Last login: Thu May 29 10:00:55 on console
-sh: syntax error: `(' unexpected
-sh: grep: not found
-sh: uname: not found
-sh: test:... (1 Reply)
Discussion started by: eamani_sun
1 Replies
6. Shell Programming and Scripting
kill -s KILL 0
-----------------------
-----------------------
i have used this command in a script...it is showing "killed" in output console.
i don't want that.plz help what to do.i have tried --kill -s KILL 0 >/dev/null
it is still showing "killed" in the output console...what to do? (1 Reply)
Discussion started by: arghya_owen
1 Replies
7. Solaris
Hi Peeps,
Apologies if this is the wrong forum for this, if it is can someone point me in the direction of the right one?
Problem:
I've dropped an XVR-300 Graphics card into a T5220, configured it to output and input from the screen and keyboard instead of the virtual console. It... (3 Replies)
Discussion started by: callmebob
3 Replies
8. Solaris
Hi
I have a stupid problem with ultra 5 console connection.
I can't connect to serial port with my laptop.
I made these configurations from ok prompt:
OK setenv input-device ttya
OK setenv output-device ttya
OK setenv auto-boot? false
I tried to connect to machine with cisco rollover... (5 Replies)
Discussion started by: noizer`
5 Replies
9. Solaris
I'm having a problem establishing a console connection between a V240 and a V440. I verified and re verified the connection was in the correct places.
Commands:
# tip hardwire
connected
Nothing happens after that. Other V440's work fine with the receiving the connection. Is there a... (8 Replies)
Discussion started by: adelsin
8 Replies
10. Solaris
Hello,
I have a Solaris-10 non global zone. I am using MobaXterm. I login on box with root and then "su - caddrd" and then "/usr/local/bin/sudo -u cadwebppc /cad/envs/qa-cm/cadwccDomain/ucm/cs/bin/UserAdmin". This is supposed to open a GUI console, but it is failing and I am not able to figure... (2 Replies)
Discussion started by: solaris_1977
2 Replies
ccr(8) System Manager's Manual ccr(8)
Name
ccr - remote console carrier requester
Syntax
ccr [ options ] node
Description
The command establishes a logical connection between your ULTRIX system and the console carrier server on a remote system. enables your
terminal to act as the console for a remote unattended system. For example, your terminal can act as the console for a Digital Ethernet
Communications Server (DECSA) and its resident software. The node is the name or address of the target node. A node name consists of from
one to six alphanumeric characters. A node address consist of two decimal integers (n.n), where the first indicates the network number
(1-63), and the second indicates the node address (1-1023).
You can use to force a crash if a server node becomes unresponsive. To determine how to force a crash, see the documentation for the
respective server product.
The requirements for using are as follows:
o The host node (that is, your local ULTRIX node) and the remote node must be on the same Ethernet.
o If your server product is a DECSA, the console carrier server image (plutocc.sys) and its loader file (plutowl.sys) must be located in
on your ULTRIX node. The pluocc.sys and plutowl.sys files are not need, nor is any loading done for other servers. For more details,
see the installation guide for the particular server product.
<CTRL/D> exits from console carrier mode and terminates
Options
-c Uses the specified circuit to connect to the target node.
-h Uses the specified address (next argument) as the Ethernet address of the target node.
-n Uses the next argument as the target node ID.
-p Uses the specified service password (next arguments) in accessing the target node.
Examples
# /etc/ccr -c qna-0 -n dallas <RET>
ccr: Remote console reserved
.
.
.
<CTRL/D>
ccr: Remote console released
#
Restrictions
You must have superuser privileges to run
Diagnostics
The command can return the following diagnostic messages:
ccr: Remote console reserved
The command has successfully connected to the remote console server and your terminal is now capable of acting as a console for the remote
node.
ccr: Remote console released
Your connection with the remote console server has been terminated and you are no longer in console carrier mode.
ccr: Remote console already in use
The remote console server that you are attempting to connect to is already reserved by another user.
ccr: Permission denied
You do not have the necessary privileges to run (You must be a superuser.)
ccr: Hardware address required
The command is unable to locate the hardware address of the remote node to which you are attempting to connect. A remote node's hardware
address must be defined either in the command line, or in its nodes database entry. (Nodes database entries are defined with the command.)
ccr: No node entry in database
The command does not recognize the remote node to which you are attempting to connect, since the node-id that you specified is not defined
in the nodes database. (Nodes database entries are defined with the command.)
Files
Console carrier server image
Console carrier server loader
See Also
addnode(8), getnode(8), load(8), remnode(8), trigger(8)
Guide to Local Transport Servers
ccr(8)