Hi,
I got hold of a SUN SPARCstation Voyager today, but I don't have the root password. I made a linux bootdisk and tried to sue that to edit the shadow file, but it comes up saying "magic number" (since it's not a UFS floppy).
I haven't got any recovery disks for it, and no documentation.
... (5 Replies)
Hey guys...hopefully this will be a fairly easy one.
I've got an old SPARCstation 5 running Sun 5.5.1 that I just hooked up to the network so that I can run HP OpenView. The box is working fine, but it is broadcasting as a boot server. In other words, when co-workers come in and get ready to log... (2 Replies)
Hey guys...hopefully this will be a fairly easy one.
I've got an old SPARCstation 5 running Sun 5.5.1 that I just hooked up to the network so that I can run HP OpenView. The box is working fine, but it is broadcasting as a boot server. In other words, when co-workers come in and get ready to... (2 Replies)
I have sparc Station 20 which is crashed and doesn't boot from the OK prompt except gives me bunch of errors. How can i retrieve my data from the root drive before go for re-installation. This system has Veritas Volume manager on it don't know the version but assume its 2.xxx.
Thanks
-Adeel (0 Replies)
Hey. i have been trying to configure the on board Ethernet in My Sparcstation 5, i have spent a lot of time on the ifconfig man pages. but it could really be nice with some pro. help. i don't think the interface is running . i don't know what name the interface have, le0 eth0 et0, it just says no... (4 Replies)
Hi all,
I have one problem on my sparcstation20, time stops when I turn off my station, where is the problem? do u think is the NVRAM is crashed? ( for example, I turn off my station at 11:00, when I turn on the next day, I found time on 22:20)!!!
please help me thank's for All (9 Replies)
I apologize in advance that this is probably more of a hardware question than a unix/software one.
I've got a seemingly brand-new sparcstation 20 that came with 2 memory modules and that's about it.
I've added a new 2 GB HDD and a VSIMM Onboard SX Graphics module.
So, I assume with the... (2 Replies)
I am away from my Unix sparcstation and need to work on it remotely via a
PC. I can open a PuTTy window and execute line commands. But I've
forgotten how to be able to work on a graphical program, like xfig. I know
there are some commands to enable this, but can't remember them. (6 Replies)
We have an ancient Sparcstation 5 for those few clients that still run SunOS or Solaris. After the last power outage (4 years ago?) we never turned it back on. It had been making some unpleasant noises back then, too.
Now we need it again and it won't boot.
The machine came with one hard... (4 Replies)
Hello,
Just wanted to let interested people know that we've recently released a Linux freeware version of SparcStation 20 emulator. It emulates SS20 with some basic peripherals: a single SPARC V8 32bit CPU, up to 512MB RAM, an NCR53C94 SCSI controller, 2 serial lines, disks, a network adapter,... (7 Replies)
Discussion started by: Thlan
7 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)