Sponsored Content
Full Discussion: About bos.rte v=4,r<2
Operating Systems AIX About bos.rte v=4,r<2 Post 302152797 by bakunin on Friday 21st of December 2007 09:42:40 AM
Old 12-21-2007
Quote:
Originally Posted by fla22
I have check the fileset with in AIX 4.2 and I have found this error after I type in lppchk -v.
I doubt that.

Quote:
Can anyone help me out with this problem ?
Yes: read the manpage of lppchk. I have highlighted the relevant parts.

Quote:
-v

Verifies that the / (root), /usr and /usr/share parts of the
system are valid with each other
. In other words, this flag
verifies that all software products installed on the / (root) file
system are also installed on the /usr file system and, conversely,
all the software products installed in the /usr file system are
also installed on the / (root) file system. You cannot specify
FileList items with this flag.
This flag also verifies requisites.
Note: Only one of the -c, -f, -l, and -v flags can be specified
with each use of the lppchk command.
What might be the case (but lacking concise info I'm left to guessing) ist that bos.rte is downlevel (as improbable as this sounds) to the rest of the machine. use the procedure laid out at the top thread in this forum and find out if this is the case.

bakunin
 

10 More Discussions You Might Find Interesting

1. AIX

AIX5.2 ML-03 rpm.rte

Dear All, Kindly note that i am in site and i have to upgrade an application on the server AIX 5.2 ML-03 , but i need to install the following patch first which is important : patch 'rpm.rte' must be installed with level '3.0.5.35' i need it urgent . please note that i could not find it... (1 Reply)
Discussion started by: tamemi
1 Replies

2. AIX

Perl.rte needed..

Hello I was installing ssh in Aix 4.3 but found that "perl.rte and rpm.rte" was not installed. but to my bad luck i was not able to find these packages for Aix 4.3. Ibm site just has these packages only for 5L. Can anyone help me in finding these packages. Bala (1 Reply)
Discussion started by: balaji_prk
1 Replies

3. AIX

deinstall devices.fcp.disk.array.rte

Hello, I am trying to "deinstall devices.fcp.disk.array.rte" fileset from an AIX5.3 box. Have been unsuccessful so far. "smit remove" threw the below error: FAILURES -------- Filesets listed in this section failed pre-deinstall verification and will not be removed. ... (2 Replies)
Discussion started by: ronykris
2 Replies

4. AIX

Need help in uninstalling devices.common.IBM.mpio.rte on 5.3

Hello, I have been trying to uninstall devices.common.IBM.mpio.rte from an aix5.3 box but have not been successful because it shows a whole list of dependant bos & devices packages. I have tried deleting the hdisks, dars and the dacs using rmdev -dl, but it still doesn't work. Any help on... (2 Replies)
Discussion started by: ronykris
2 Replies

5. AIX

Install fileset rsct.basic.rte

Hello! Please I need a help. AIX 5.2 5200-08 I don't have the fileset - rsct.basic.* installed and when I try to install from CD I have failure because some pre-requisists is necessary. In CD the version is rsct.basic.rte.2.3.1.0 and the pre-requisists is rsct.basic.rte.2.3.0.0. In... (6 Replies)
Discussion started by: clefeitosa
6 Replies

6. AIX

lppchk errors: bos.rte.filesystem

Hi all, I installed AIX 5.3 (TL 5300-08-01) and after that I updated to TL 5300-09-01. The problem is that, when I issue "lppchk -v" I get the following error: # lppchk -v lppchk: The following filesets need to be installed or corrected to bring the system to a consistent state:... (10 Replies)
Discussion started by: wendelalexis
10 Replies

7. AIX

bos.rte.5.2.0.10 - Failure to Install (/usr/lib/methods/cfgsf bad permissions)

I have a RS/6000 B80 which just had a disk failure; I've added a new drive and am in the process of rebuilding. I have reinstalled AIX 5.2 and am now looking to begin updating. (fyi this will be the second time I have attempted to rebuild this machine, the first time i installed ML 5200-10 and... (1 Reply)
Discussion started by: wesiman
1 Replies

8. AIX

bos.rte missing or broken

Dear Members, Recently we migrate from AIX 5.2 to AIX 5.3, before migration system state was stable but after migration when I check system state with lppchk command it shows bos.rte v=5, r<3 file sets are missing but when I check bos.rte by lslpp command it is present and in committed... (11 Replies)
Discussion started by: m_raheelahmed
11 Replies

9. AIX

what is BOS

what is BOS (3 Replies)
Discussion started by: joyhu
3 Replies

10. AIX

Downgrade bos.rte.install ?

Hello, Running AIX 6.1 TL2 SP4. bos.rte.install was upgraded to 6.1.4.1 by accident(commited). I'm trying to downgrade it. On my install DVD I found bos.rte.install_6.1.2.1.bff. So I'm trying to downgrade: # installp -acF -d/soft1 bos.rte.install 6.1.2.1... (6 Replies)
Discussion started by: vilius
6 Replies
BOS_HELP(8)						       AFS Command Reference						       BOS_HELP(8)

NAME
       bos_help - Displays help for bos commands

SYNOPSIS
       bos help [-topic <help string>+] [-help]

       bos h [-t <help string>+] [-h]

DESCRIPTION
       The bos help command displays the complete online help entry (short description and syntax statement) for each command operation code
       specified by the -topic argument. If the -topic argument is omitted, the output includes the first line (name and short description) of the
       online help entry for every bos command.

       To list every bos command whose name or short description includes a specified keyword, use the bos apropos command.

OPTIONS
       -topic <help string>+
	   Indicates each command for which to display the complete online help entry. Omit the bos part of the command name, providing only the
	   operation code (for example, specify status, not bos status). If this argument is omitted, the output briefly describes every bos
	   command.

       -help
	   Prints the online help for this command. All other valid options are ignored.

OUTPUT
       The online help entry for each bos command consists of the following two or three lines:

       o   The first line names the command and briefly describes its function.

       o   The second line lists aliases for the command, if any.

       o   The final line, which begins with the string "Usage", lists the command's options in the prescribed order. Online help entries use the
	   same symbols (for example, brackets) as the reference pages in this document.

EXAMPLES
       The following command displays the online help entry for the bos status command:

	  % bos help status
	  bos status: show server instance status
	  Usage: bos status -server <machine name> [-instance <server
	  process name>+] [-long] [-cell <cell name>] [-noauth]
	  [-localauth] [-help]

PRIVILEGE REQUIRED
       None

SEE ALSO
       bos(8), bos_apropos(8)

COPYRIGHT
       IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.

       This documentation is covered by the IBM Public License Version 1.0.  It was converted from HTML to POD by software written by Chas
       Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.

OpenAFS 							    2012-03-26							       BOS_HELP(8)
All times are GMT -4. The time now is 12:50 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy