fail to telnet localhost 106 Post: 302151648

3 More Discussions You Might Find Interesting

1. Linux

Telnet fail

Hi, I try to telnet to server: # telnet xx.xxx.1.72 1521 Trying xx.xxx.1.72... telnet: connect to address xx.xxx.1.72: Connection refused telnet: Unable to connect to remote host: Connection refused iptables is off: # service iptables status Firewall is stopped. # And I have edit...

2. Shell Programming and Scripting

If Telnet fail abort other command..??

Hi Team, I my script i telent my node ip and after loging i run some commands...But some time login fail so i want to stop script at that time.. CONFIG_CHNG.sh printf 'Please Input Node ID : ' read node node="$node" #exec > node_log_$node.log 2>&1 #set -x >...

3. UNIX for Beginners Questions & Answers

Telnet failed to localhost.

Hi, I am trying telnet to localhost 514. But the connection is refusing. Port does not appear in netstat. IP table service is also off.

LEARN ABOUT HPUX

mrinfo

mrinfo(1M)																mrinfo(1M)

NAME

       mrinfo - Multicast Routing Configuration Information Tool

SYNOPSIS

       debuglevel] retries] timeout] [ multicast-router ]

DESCRIPTION

       requests  the configuration information from the multicast-ourter, and prints the information to the standard out.  multicast-router can be
       either an IP address or a system name.  sends out the ASK_NEIGHBORS igmp  message  to  the  specified  multicast-router,  when  the  router
       receives  the request, it sends back its configuration information. If the multicast-router is not specified, the request is sent the local
       router.

       The the configuration information for each interface is printed in the following format:

       If there are multiple neighbor routers on one interface, they will all be reported on the output.  The possible values for flag are:

       Neighbors are reached via tunnel.

       The tunnel uses IP source routing.

       The interface is down.

       The interface is administratively disabled for multicast routing.

       The local router is the querier of the subnet.

       Please see mrouted(1M) for and

       The command line options are:

       Sets the level for printing out the debug message. The default is 0,
		     only error and warning messages will be printed. Debug level three prints most the messages.

       Sets the retry times to pull the routing daemon for information. The
		     default is 3.

       Specifies the timeout value in seconds for waiting the reply. The default value
		     is 4.

EXAMPLE

       The following is an example of quering the multicasting configuration from the local routing daemon.

	      127.0.0.1 (localhost) [version 3.3]:
		15.13.106.144 -> 15.13.106.145 (hpntcbs.cup.hp.com) [10/1/querier]
		193.2.1.39 -> 0.0.0.0 (all-zeros-broadcast) [1/1/disabled]
		15.13.106.144 -> 15.255.176.33 (matmos.hpl.hp.com) [10/1/tunnel]
		15.13.106.144 -> 15.17.20.7 (hpspddc.vid.hp.com) [10/1/tunnel/down]

   Note
       must be run as root.

AUTHOR

       was developed by Van Jacobson.

SEE ALSO

       mrouted(1M), map-mbone(1M).

																	mrinfo(1M)