Sponsored Content
Operating Systems SCO SCO OpenServer 5.0.7 Installation problem on HP ML310 G4 Post 302149777 by 0ryn on Friday 7th of December 2007 10:56:48 AM
Old 12-07-2007
Computer Re Openserver 5.0.7 on HP ML310 G4

Just in case anyone wanted to know it is possable to install SCO 5.0.7 on an ML310 G4
I just did it. Smilie

You need to grab the wd V2.0 driver from sco's website
The SCO Group, Inc. | Support | Update | Download | Release
copy the image to a floppy using rawrite2.exe (windows required) or use dd (unix / linux)

You'll need to connect a floppy drive to your server and you'll also need a floppy drive cable. There is a floppy power connector on the power unit loom.

Next you need to make sure that sata raid is turned off in the bios
(sorry folks raid is not supported using the internal controller I already tried using the iir driver).

Pop your newly created floppy into the floppy drive and bung the sco 5.0.7 boot cd into the cd drive
at the boot prompt type "link" without quotes and hit enter.
When prompted enter "wd" again without quotes.
The sco installer should load up and prompt you for the disk, as you already have it in the drive, just hit enter.

Now continue to install sco as normal. Smilie

Note the internal NIC is not supported at installation - set it to defered.
The driver for this can be installed later.
The SP4 cd contains the broadcom driver that seems to work for most compaq / HP servers (My install has not got that far yet so I'll post later which source I used for the NIC driver)

If you need raid then the E200 raid controler claims to be supported by the hpsas driver.
 

10 More Discussions You Might Find Interesting

1. IP Networking

Installation Problem in Unix Openserver

I have certain problems while Installing UNIX OPENSERVER.Could anyone solve that if I provide that problem. (3 Replies)
Discussion started by: Rajraius
3 Replies

2. Filesystems, Disks and Memory

SCO openserver 5 install problem

Hello all, I'm trying to install SCO openserver 5 on a 2.5 Gig hard drive, and I tried fdisk and a low-level format of the drive. When I insert the boot diskette all seems fine, and it asks me to set the cd-rom and it sees it and reads from it. Well, I'm thinking all is well until right after I... (1 Reply)
Discussion started by: immulett
1 Replies

3. UNIX for Dummies Questions & Answers

SCO OpenServer Booting Problem

My company has a Compaq NeoServer running SCO OpenServer Release 5 (vintage late 1998) that we inherited from another small company. This has been a very reliable file server for our small company. We recently installed a new Linux server and would like to convert the NeoServer to other functions... (1 Reply)
Discussion started by: Jeff Boyce
1 Replies

4. UNIX for Dummies Questions & Answers

RE: login problem with SCO openserver

I am running the beta version of Openserver by SCO and the Graphical login only gives me the option of logging into the system v xwindows and I know that this build included KDE 3.3 I have tried the kde kdm command at shell prompt: command not found. Any ideas anyone? (0 Replies)
Discussion started by: coreykirk
0 Replies

5. SCO

sco openserver 5.07 installation problem

Hi everyone, We r installing sco openserver 5.07 on dell poweredge 2800 but we are facing problem when installing SCSI-raid drivers. Dell provide Perc4 raid card and we dont found raid drivers for this specific raid card. So we r stuck up on primary stage and we also dont know the... (2 Replies)
Discussion started by: mineshkoli
2 Replies

6. SCO

SCO OpenServer 5.0.7 Installation problem

we are installing Openserver 5.0.7, system have SAS controller (Hard Disk Attached) as well as Adaptec ultra 320 controller (Tape Drive Attached). At the time of installation we link both driver BTLD Boot: Defbootstr link=accraid ad320 Aftes succesfully installation of accraid btld... (6 Replies)
Discussion started by: hafizurr
6 Replies

7. SCO

sco openserver release 5.0.5 installation problems on notebook

hello, i want to install release 5.0.5 on my notebook but the system hangs when extracing files from source media in fact after configuration all of setting please help me:confused: (1 Reply)
Discussion started by: hossein
1 Replies

8. SCO

SCO OpenServer 5.0.5 Problem

I am currently having a problem with my SCO OpenServer 5.0.5 / 3.2v5.0.5 system. Running smoothly for the past 3 years, at random on March 16, 2010 the system crashes. I reboot it. Everything is normal again. 9 hours later it crashes again. This cycle has repeated itself ever since then. System... (2 Replies)
Discussion started by: jesmith
2 Replies

9. UNIX for Advanced & Expert Users

Installation of Sco Openserver 5.0.7 on HP DC 7600

Hi All , I wanted to install SCO Open server 5.0.7 on HP DC7600 Desktop Machine, is there any bootloader and which site i can find it to enable me install it because the system is not recognizing the Hard disk just like the ML G Series machine installations. Please help if you have done this... (4 Replies)
Discussion started by: davosky
4 Replies

10. SCO

Installation on SCO Openserver 5.0.5

Hello all, First off- great forum! I have learned a lot just by reading some of the questions and answers. Good to see there are good people out there still willing to help! Here is my dilemma- I have a fairly new server running an Activant product on it, which runs SCO openserver 5.0.5... (9 Replies)
Discussion started by: crt001
9 Replies
CFREE(3)						     Linux Programmer's Manual							  CFREE(3)

NAME
cfree - free allocated memory SYNOPSIS
#include <stdlib.h> /* In SunOS 4 */ int cfree(void *ptr); /* In glibc or FreeBSD libcompat */ void cfree(void *ptr); /* In SCO OpenServer */ void cfree(char *ptr, unsigned num, unsigned size); /* In Solaris watchmalloc.so.1 */ void cfree(void *ptr, size_t nelem, size_t elsize); Feature Test Macro Requirements for glibc (see feature_test_macros(7)): cfree(): _BSD_SOURCE || _SVID_SOURCE DESCRIPTION
This function should never be used. Use free(3) instead. 1-arg cfree In glibc, the function cfree() is a synonym for free(3), "added for compatibility with SunOS". Other systems have other functions with this name. The declaration is sometimes in <stdlib.h> and sometimes in <malloc.h>. 3-arg cfree Some SCO and Solaris versions have malloc libraries with a 3-argument cfree(), apparently as an analog to calloc(3). If you need it while porting something, add #define cfree(p, n, s) free((p)) to your file. A frequently asked question is "Can I use free(3) to free memory allocated with calloc(3), or do I need cfree()?" Answer: use free(3). An SCO manual writes: "The cfree routine is provided for compliance to the iBCSe2 standard and simply calls free. The num and size argu- ments to cfree are not used." RETURN VALUE
The SunOS version of cfree() (which is a synonym for free(3)) returns 1 on success and 0 on failure. In case of error, errno is set to EINVAL: the value of ptr was not a pointer to a block previously allocated by one of the routines in the malloc(3) family. CONFORMING TO
The 3-argument version of cfree() as used by SCO conforms to the iBCSe2 standard: Intel386 Binary Compatibility Specification, Edition 2. SEE ALSO
malloc(3) COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. 2007-07-26 CFREE(3)
All times are GMT -4. The time now is 05:29 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy