sadly no answer to this
i am asking because i have told as for my /etc/rc.conf changes to take effects, i must use /etc/rc.d/netif to restart the services
but i found it later that i will be disconnected from my remote terminal just because /etc/rc.d/netif wont care about routing
it's a pain to get connected back to the remote terminal
i've found out later that i must use /etc/rc.d/routing together with netif
for e.g:
/etc/rc.d/routing will re add back the routing tables after it has been flushed by /etc/rc.d/netif
:confused:
Hi:
I donīt know how to add route gateway and when restart the machine lose this route and put other.
In SCO ver 5.6 Enterprise write:
etc\route delete gateway
route add gateway 199.199.1.1.
so , netstat -rn to see if has change -> all ok
Restart -> !!!... (2 Replies)
I have a AIX lates OS.
I;m trying to setup a remote office using a telnet section and for some reazon it wont let me login in to the server.
I've done this type of configuration on a SCO 5.0.6 .
In SCO there is a file call S99route and that is where you put the gateway and it works just... (3 Replies)
I need some help adding routes in sco.
I am using SCO Openserver 5.0.4.
Basically I have 2 gateways here. The first is 10.15.1.1 and allows me access to the rest of the computers in the office and in other offices.
The other gateway is 10.15.10.2 and is the sonicwall that will allow access... (3 Replies)
Hi Community,
I've a question about network adaptors.
I've installed Solaris 10 configuring the ce0 port with an IP(10.23.8.15) , an interface_name (first) and a gateway(10.23.8.1) .
I need to change the name of the interface ce0 and to configure another interface (ce1) with another... (1 Reply)
Dear Sir
I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper.
I am having a problem, configuring static call routing on GNUGK
in the section
... (0 Replies)
Hi Greetings...
I have an issue in connecting the zone from outside the network and it is because of default gateway. I can ping default gateway from inside the zone and not able to ping from global zone due to different VLAN issue. If i add two different gateways and restart network services,... (2 Replies)
Hi,
OS: Solaris 11.2 64bit
IP address: 172.16.10.10
Netmask: 255.255.254.0
Gateway: 172.16.2.254
From windows box, i can set and ping gateway. IP address is same segment with windows box. But on solaris i cannot set gateway.
route add default 172.16.2.254
add net default: gateway... (6 Replies)
Hi,
This is the routing table on a RHEL 7 server :
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.132.81.145 0.0.0.0 UG 100 0 0 eno49
10.132.81.144 0.0.0.0 255.255.255.240 U 100 0 0 eno49... (4 Replies)
Dear friends
I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies
LEARN ABOUT PLAN9
defaultrouter
defaultrouter(4) File Formats defaultrouter(4)NAME
defaultrouter - configuration file for default router(s)
SYNOPSIS
/etc/defaultrouter
DESCRIPTION
The /etc/defaultrouter file specifies a IPv4 host's default router(s).
The format of the file is as follows:
IP_address
...
The /etc/defaultrouter file can contain the IP addresses or hostnames of one or more default routers, with each entry on its own line. If
you use hostnames, each hostname must also be listed in the local /etc/hosts file, because no name services are running at the time that
defaultrouter is read.
Lines beginning with the ``#'' character are treated as comments.
The default routes listed in this file replace those added by the kernel during diskless booting. An empty /etc/defaultrouter file will
cause the default route added by the kernel to be deleted.
Use of a default route, whether received from a DHCP server or from /etc/defaultrouter, prevents a machine from acting as an IPv4 router.
You can use routeadm(1M) to override this behavior.
FILES
/etc/defaultrouter Configuration file containing the hostnames or IP addresses of one or more default routers.
SEE ALSO in.rdisc(1M), in.routed(1M), routeadm(1M), hosts(4)SunOS 5.10 17 Aug 2004 defaultrouter(4)