Restore from HP Tape Drive Post: 302147559

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Tape Restore Problems!!!

Hi. I have been having problems with restoring from a tape backup. I use the following cpio command: find / -print | cpio -ouvB > /dev/rStp0 After running this cpio command, the screen will display all files, but when I try to read or restore the tape I get the following error: Tape input...

2. Filesystems, Disks and Memory

Restore to disk from tape

I have been restoring from tape some old data. I have done quite a few tapes and have had no problems until now. The command I am running is "dd if=/dev/rmt/1hbn bs=1024 | tar -pBxF - ". This is the second tape have have come up with the error "Not enough space". This tape has a couple of...

3. HP-UX

Backup Tape Restore?

I am trying to do a restore on a backup tape (DDS2) and am having a little trouble. For one, I dont know how the tape was made, whether is was tar, cpio, dump..etc. Anyone know how to restore a tape without knowing the format of the backup?

4. AIX

Restore a tape

Hello everyone I have a tape with some information that I got to restore, the tape was made with the fbackup command in a hp box. My question is that I have to restore in a Ibm box, how can I do this ? Thanks in advance

5. UNIX for Dummies Questions & Answers

I cannot restore my backup from my exabyte tape drive

Hi All, I have an old Unix system used by a client as a backup server.I installed an Exabyte tape drive and on restarting the server and during POSTs, the system recognizes the tape drive with its scsi id. On running the command devstat -IAF, the system sees the tape drive quite well. When...

6. Solaris

FLAR Tape Backup/Restore

I have a T2000 server that is JumpStarted with Solaris 10 from the JumpStart server. Host name and IP address is changed after that. Then we backup the server using FLAR to tape: root.damas# date; flarcreate -c -t -n "Sol10_cairo_image" -a "engineering@starsolutions.com" -R / /dev/rmt/0n ;...

7. Solaris

Solaris 2.6 restore from tape

Hope someone can help me here... I've got to restore an E450 with 300MHz cpus which was running Solaris 2.6 from tape. Regrettably the boot drive has failed. I've access to the first release of Solaris 2.6 CD's and to a set of Solaris 9 CD's. I remember that different E450 CPUs needed different...

8. Emergency UNIX and Linux Support

Can't restore my deleted etc from tape

Hi I recently deleted my /etc but I had a backup on tape. I was able to boot the server with a cd-rom and mounted the /c1t0d0s0 which is where the root directory resides. However when I tried to restore the backup with tar xvf /dev/rmt/0n I wasn't successful even though I was able to use the tar...

9. AIX

Restore directory and contents from tape

Hi, I have taken a backup of a directory on my tape in using below command cd /backup find * -print|backup -ivf '/dev/rmt0' '-U' |tee -a /syslogs/backup.log and output appear in below format. a 0 rman-before-08032014 a 58403323904...

LEARN ABOUT OPENSOLARIS

tcopy

tcopy(1)							   User Commands							  tcopy(1)

NAME

       tcopy - copy a magnetic tape

SYNOPSIS

       tcopy source [destination]

DESCRIPTION

       The  tcopy  utility copies the magnetic tape mounted on the tape drive specified by the source argument. The only assumption made about the
       contents of a tape is that there are two tape marks at the end.

       When only a source drive is specified, tcopy scans the tape, and displays information about the sizes of records and tape files. If a  des-
       tination  is  specified,  tcopy makes a copies the source tape onto the destination tape, with blocking preserved. As it copies, tcopy pro-
       duces the same output as it does when only scanning a tape.

       The tcopy utility requires the use of Berkeley-compatible device names. For example,

	 example% tcopy /dev/rmt/1b /dev/rmt/2b

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWesu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       mt(1), ioctl(2), attributes(5)

NOTES

       tcopy will only run on systems supporting an associated set of  ioctl(2) requests.

SunOS 5.11							    10 Mar 2000 							  tcopy(1)