I am training to be support on our solaris based network and was wondering why solaris seems to assign the same mac address to all NICs placed in the machine regardless of how many NICs are in there, when i do a ifconfig -a all nics have same MAC.
Presumably this is a feature and there is... (1 Reply)
Hi friends,
I installed oracle 10g (10.2.0.2) RAC on 2 IBM p5 570 servers running AIX 5.3ML04 and HACMP5.2 (used Raw devices, not used GPFS). Each server has 4 x 1Gbps ethernet cards (NICs), en0 and en1 for boot address, en2 and en3 for oracle interconnect.
Now i want to merge 2 NICs (en2 and... (1 Reply)
FreeBSD 4.8, Apache 1.3.27 - two NICs, one with a real-world IP plugged into a switch outside the PIX firewall, the other with a private IP plugged into a switch inside the PIX firewall. Apache listens on both IPs. my domain is mydomain.org.
so in /etc/rc.conf i have something like this (these... (10 Replies)
I'm looking for a way in RHL 5.1 to use two NICs on one host with two physical IP addresses and map them under one virtual IP address, i.e. NIC 1 10.10.10.1 NIC2 10.10.10.2 VIP 192.168.10.1
Basically I want either one of the NICs to ARP for the VIP. No load balancing required just HA. (2 Replies)
I have a Solaris 10 box that has 2 Ethernet connections. One is 172.21.0.150, this is on the main internal LAN. The other is 172.16.0.50 this is the DMZ. I have Apache 2.0.59, I do not care which it Listens to but the main one for it is 172.16.0.50 (DMZ) which I have been explicit (Listen... (1 Reply)
Hi;
Is there a way to determine for sure how many NIC ports installed on my Linux box?
I tried to run "lspci" but not sure about the results, it's not clear.
Below are the results when i run both "ifconfig" & "lspci" on my Linux box i hope someone can help me finding the actual numbers of... (1 Reply)
I don't undestand how to combine 4 nics in order to use DM Multipath. Do I have to install each nic with its IP address? If yes, do I need a group IP address? This concept is not clear for me.
The connection beetwen the server (DELL Poweredge T710) and the SAN through iscsi works well, I used... (1 Reply)
Dear members,
I have to problems ;
First ; I need to setup two NICs for a Solaris 10 server. But I could not do that unless giving different names in /etc/hosts file. like :
10.1.1.1 testsolaris1
10.3.1.1 testsolaris2
Second ; After solving first problem I have to setup my... (3 Replies)
Hi all,
Host - Ubuntu 12.04 desktop 64bit
Virtualizer - Oracle VirtualBox
2 NICs
Where can I find relevant document to set up 2 NICs, one for inward bound and another for outward bound, separate channel, both connected to the same router
Would following document be appropriate for my... (1 Reply)
Hello All,
I have Linux box with two interface cards.
Every card has it's own IP Address and Gateway, IP addresses are from different subnets.
eth0 192.168.1.10/24 GW 192.168.1.1
eth1 192.168.2.10/24 GW 192.168.2.1
Third PC is located in 192.168.13.0/24 network and is trying to access... (2 Replies)
Discussion started by: AndreiM
2 Replies
LEARN ABOUT HPUX
zgrep
ZGREP(1) General Commands Manual ZGREP(1)NAME
zgrep - search possibly compressed files for a regular expression
SYNOPSIS
zgrep [ grep_options ] [ -e ] pattern filename...
DESCRIPTION
Zgrep invokes grep on compressed or gzipped files. These grep options will cause zgrep to terminate with an error code:
(-[drRzZ]|--di*|--exc*|--inc*|--rec*|--nu*). All other options specified are passed directly to grep. If no file is specified, then the
standard input is decompressed if necessary and fed to grep. Otherwise the given files are uncompressed if necessary and fed to grep.
If the GREP environment variable is set, zgrep uses it as the grep program to be invoked.
EXIT CODE
2 - An option that is not supported was specified.
AUTHOR
Charles Levert (charles@comm.polymtl.ca)
SEE ALSO grep(1), gzexe(1), gzip(1), zdiff(1), zforce(1), zmore(1), znew(1)ZGREP(1)